ORWDBA18 ; SLC/GDU - Billing Awareness - Phase I [10/18/04 10:30]
;;3.0;ORDER ENTRY/RESULTS REPORTING;**195**;Dec 17, 1997
;
;Enable Billing Awareness By User Parameter Module
;ORWDBA18 - Assign the parameter utilities
;
SETUP ;Run temp global kill, build assigned list, build unassigned list
D KTG,LISTA,LISTU Q
;
KTG ;Kill the temp globals used by this program
K ^TMP("ORPAL",$J),^TMP("ORPUL",$J) Q
LISTA ;Build a list of providers with the parameter already assigned to them.
N ORERR,PIV,NAME,X
S (ORERR,X)="",U="^"
D ENVAL^XPAR("^TMP(""ORPAL"",$J,""A"")","OR BILLING AWARENESS BY USER",1,.ORERR,1)
Q:^TMP("ORPAL",$J,"A")=0
F S X=$O(^TMP("ORPAL",$J,"A",X)) Q:X="" D
. S IEN=$P(X,";"),PIV=^TMP("ORPAL",$J,"A",X,1)
. S NAME=$$GET1^DIQ(200,IEN,.01)
. S ^TMP("ORPAL",$J,"B",IEN)=NAME_U_PIV
Q
LISTU ;Build a list of providers who have not been assigned the parameter
N CNT,IEN,PRVKEY,NAME
S (NAME,IEN,PRVKEY)="",(CNT,^TMP("ORPUL",$J,"A"))=0
F S NAME=$O(^VA(200,"B",NAME)) Q:NAME="" D
. S IEN=$QS($Q(^VA(200,"B",NAME)),4)
. S PRVKEY=$$PRVKEY^ORWDBA1(IEN) ;Check for provider key
. I PRVKEY=0 Q ;If not a provider quit
. I $D(^TMP("ORPAL",$J,"B",IEN))=1 Q ;If already assigned quit
. ;Build ^TMP("ORPUL"
. S CNT=CNT+1,^TMP("ORPUL",$J,"A")=CNT
. S ^TMP("ORPUL",$J,"B",CNT)=NAME_U_IEN
. S ^TMP("ORPUL",$J,"C",NAME)=CNT
Q
ALERT ;Alert the user, all providers have been assigned the parameter
;Kill temp globals and quit
N DIR
D SCRHDR S DIR(0)="E"
W !!,$P($T(ALLPA),";",2),!!
D ^DIR K DIR
D KTG Q
;
DISPRV ;Displays the providers in the unassigned list for user selection
;PRVNAME is set to null in ORWDBA8 and is reset based on user selection
;Selection of Q for quit, timeout, and up arrow will set PRVNAME to Q
;Selection of provider will set PRVNAME to the selected provider's name
;Prepare for display of providers
;N CNT,DIR,DTOUT,DUOUT,FST,HC,U,X,Y
S FST=1,U="^"
DPO ;Display process starts here
D SCRHDR
S (X,Y)="",CNT=0,HC=1,DIR(0)=$P($T(SOOPT),";",3)
F X=FST:1:10+(FST-1) Q:$D(^TMP("ORPUL",$J,"B",X))=0 D
. S CNT=CNT+1 S:CNT>10 CNT=1
. S DIR(0)=DIR(0)_CNT_":"_$P(^TMP("ORPUL",$J,"B",X),U)_";"
S:CNT=10 DIR(0)=DIR(0)_";"_$P($T(D0N),";",3)
S:FST>10 DIR(0)=DIR(0)_";"_$P($T(D0P),";",3)
S DIR(0)=DIR(0)_";"_$P($TEXT(D0Q),";",3)
S DIR("A")=$P($T(DA),";",3)
S DIR("?",HC)=$P($T(DH),";",3)
S:CNT=10 HC=HC+1,DIR("?",HC)=$P($T(DHN),";",3)
S:FST>10 HC=HC+1,DIR("?",HC)=$P($T(DHP),";",3)
S DIR("?")=$P($T(DHQ),";",3)
D ^DIR K DIR
I Y="Q"!(Y="")!($D(DTOUT))!($D(DUOUT)) S PRVNAME="Q" Q
I Y="N"!(Y="P") S FST=$S(Y="N":FST+10,1:FST-10) G DPO
S PRVNAME=Y(0) Q
CONMAS ;Confirm the mass assignment of the parameter
;MRC is set to null and ORWDBA8 and reset based on user selection here
;DIR array is set to values based on user selection in ORWDBA8
;Selection of NO, timeout, and up arrow will set MRC=0
;Selection of YES will set MRC=1
S Y="" D SCRHDR,^DIR K DIR I Y="NO"!($D(DTOUT))!($D(DUOUT)) S MRC=0 Q
S MRC=1 Q
MASASN ;Mass Assignment of the parameter
;SEL is set in ORWDBA8 by user selection.
;SEL="E", the parameter is set to 1 to enable Billing Data Capture
;SEL="D", the parameter is set to 0 to disable Billing Data Capture
N DIR,ENT,ORERR,INST,PAR,U,VAL,X
S (ENT,X)="",U="^",INST=1,VAL=$S(SEL="E":1,1:0)
S PAR=$QS($Q(^XTV(8989.1,"B","OR BILLING AWARENESS BY USER")),4)
D SCRHDR W !!
F X=1:1:^TMP("ORPUL",$J,"A") D
. W "."
. S ENT=$P(^TMP("ORPUL",$J,"B",X),U,2)_";VA(200,"
. D ADD^XPAR(ENT,PAR,INST,VAL,.ORERR)
S DIR(0)="E",DIR("A")=$S(SEL="E":$P($T(MEC),";",3),1:$P($T(MDC),";",3))
D ^DIR K DIR Q
SCRHDR ;Screen Header
W:$D(IOF) @IOF
W !,$P($T(SH),";",3),!
W:SEL="" $P($T(SHA),";",3)
W:SEL="E" $P($T(SHAE),";",3)
W:SEL="D" $P($T(SHAD),";",3)
W:SEL="I" $P($T(SHAI),";",3)
Q
;;Text for user messages, selection options, user help
ALLPA ;;All providers have been assigned the parameter.
SOOPT ;;SO^
SXOPT ;;SX^
SH ;;Enable Clinical Indicator Data Capture By Provider Parameter Management
SHA ;;Assign Parameter To Provider Option
SHAE ;;Assign/Enable Parameter For All Providers Option
SHAD ;;Assign/Disable Parameter For All Providers Option
SHAI ;;Assign and Enable/Disable Parameter By Individual Provider Option
MMPA ;;All providers have the Enable CIDC By User parameter assigned.
DH ;;Select the provider who the parameter will be assigned to.
DHN ;;Enter N to get the next 10 providers in the list.
DHP ;;Enter P to get the previous 10 providers in the list.
DHQ ;;Enter Q to quit and return to previous menu.
D0N ;;N:Next 10 providers
D0P ;;P:Previous 10 providers
D0Q ;;Q:Quit
DA ;;Select the provider to assign the parameter
MEP ;;Now assigning and enabling the Clinical Indicatr Data Capture parameter
MEC ;;Assignment and enable Clinical Indicator Data Capture complete
MDP ;;Now assigning and disabling the Clinical Indicator Data Capture parameter
MDC ;;Assignment and disable Clinical Indicator Data Capture complete
ORWDBA18 ; SLC/GDU - Billing Awareness - Phase I [10/18/04 10:30]
+1 ;;3.0;ORDER ENTRY/RESULTS REPORTING;**195**;Dec 17, 1997
+2 ;
+3 ;Enable Billing Awareness By User Parameter Module
+4 ;ORWDBA18 - Assign the parameter utilities
+5 ;
SETUP ;Run temp global kill, build assigned list, build unassigned list
+1 DO KTG
DO LISTA
DO LISTU
QUIT
+2 ;
KTG ;Kill the temp globals used by this program
+1 KILL ^TMP("ORPAL",$JOB),^TMP("ORPUL",$JOB)
QUIT
LISTA ;Build a list of providers with the parameter already assigned to them.
+1 NEW ORERR,PIV,NAME,X
+2 SET (ORERR,X)=""
SET U="^"
+3 DO ENVAL^XPAR("^TMP(""ORPAL"",$J,""A"")","OR BILLING AWARENESS BY USER",1,.ORERR,1)
+4 IF ^TMP("ORPAL",$JOB,"A")=0
QUIT
+5 FOR
SET X=$ORDER(^TMP("ORPAL",$JOB,"A",X))
IF X=""
QUIT
Begin DoDot:1
+6 SET IEN=$PIECE(X,";")
SET PIV=^TMP("ORPAL",$JOB,"A",X,1)
+7 SET NAME=$$GET1^DIQ(200,IEN,.01)
+8 SET ^TMP("ORPAL",$JOB,"B",IEN)=NAME_U_PIV
End DoDot:1
+9 QUIT
LISTU ;Build a list of providers who have not been assigned the parameter
+1 NEW CNT,IEN,PRVKEY,NAME
+2 SET (NAME,IEN,PRVKEY)=""
SET (CNT,^TMP("ORPUL",$JOB,"A"))=0
+3 FOR
SET NAME=$ORDER(^VA(200,"B",NAME))
IF NAME=""
QUIT
Begin DoDot:1
+4 SET IEN=$QSUBSCRIPT($QUERY(^VA(200,"B",NAME)),4)
+5 ;Check for provider key
SET PRVKEY=$$PRVKEY^ORWDBA1(IEN)
+6 ;If not a provider quit
IF PRVKEY=0
QUIT
+7 ;If already assigned quit
IF $DATA(^TMP("ORPAL",$JOB,"B",IEN))=1
QUIT
+8 ;Build ^TMP("ORPUL"
+9 SET CNT=CNT+1
SET ^TMP("ORPUL",$JOB,"A")=CNT
+10 SET ^TMP("ORPUL",$JOB,"B",CNT)=NAME_U_IEN
+11 SET ^TMP("ORPUL",$JOB,"C",NAME)=CNT
End DoDot:1
+12 QUIT
ALERT ;Alert the user, all providers have been assigned the parameter
+1 ;Kill temp globals and quit
+2 NEW DIR
+3 DO SCRHDR
SET DIR(0)="E"
+4 WRITE !!,$PIECE($TEXT(ALLPA),";",2),!!
+5 DO ^DIR
KILL DIR
+6 DO KTG
QUIT
+7 ;
DISPRV ;Displays the providers in the unassigned list for user selection
+1 ;PRVNAME is set to null in ORWDBA8 and is reset based on user selection
+2 ;Selection of Q for quit, timeout, and up arrow will set PRVNAME to Q
+3 ;Selection of provider will set PRVNAME to the selected provider's name
+4 ;Prepare for display of providers
+5 ;N CNT,DIR,DTOUT,DUOUT,FST,HC,U,X,Y
+6 SET FST=1
SET U="^"
DPO ;Display process starts here
+1 DO SCRHDR
+2 SET (X,Y)=""
SET CNT=0
SET HC=1
SET DIR(0)=$PIECE($TEXT(SOOPT),";",3)
+3 FOR X=FST:1:10+(FST-1)
IF $DATA(^TMP("ORPUL",$JOB,"B",X))=0
QUIT
Begin DoDot:1
+4 SET CNT=CNT+1
IF CNT>10
SET CNT=1
+5 SET DIR(0)=DIR(0)_CNT_":"_$PIECE(^TMP("ORPUL",$JOB,"B",X),U)_";"
End DoDot:1
+6 IF CNT=10
SET DIR(0)=DIR(0)_";"_$PIECE($TEXT(D0N),";",3)
+7 IF FST>10
SET DIR(0)=DIR(0)_";"_$PIECE($TEXT(D0P),";",3)
+8 SET DIR(0)=DIR(0)_";"_$PIECE($TEXT(D0Q),";",3)
+9 SET DIR("A")=$PIECE($TEXT(DA),";",3)
+10 SET DIR("?",HC)=$PIECE($TEXT(DH),";",3)
+11 IF CNT=10
SET HC=HC+1
SET DIR("?",HC)=$PIECE($TEXT(DHN),";",3)
+12 IF FST>10
SET HC=HC+1
SET DIR("?",HC)=$PIECE($TEXT(DHP),";",3)
+13 SET DIR("?")=$PIECE($TEXT(DHQ),";",3)
+14 DO ^DIR
KILL DIR
+15 IF Y="Q"!(Y="")!($DATA(DTOUT))!($DATA(DUOUT))
SET PRVNAME="Q"
QUIT
+16 IF Y="N"!(Y="P")
SET FST=$SELECT(Y="N":FST+10,1:FST-10)
GOTO DPO
+17 SET PRVNAME=Y(0)
QUIT
CONMAS ;Confirm the mass assignment of the parameter
+1 ;MRC is set to null and ORWDBA8 and reset based on user selection here
+2 ;DIR array is set to values based on user selection in ORWDBA8
+3 ;Selection of NO, timeout, and up arrow will set MRC=0
+4 ;Selection of YES will set MRC=1
+5 SET Y=""
DO SCRHDR
DO ^DIR
KILL DIR
IF Y="NO"!($DATA(DTOUT))!($DATA(DUOUT))
SET MRC=0
QUIT
+6 SET MRC=1
QUIT
MASASN ;Mass Assignment of the parameter
+1 ;SEL is set in ORWDBA8 by user selection.
+2 ;SEL="E", the parameter is set to 1 to enable Billing Data Capture
+3 ;SEL="D", the parameter is set to 0 to disable Billing Data Capture
+4 NEW DIR,ENT,ORERR,INST,PAR,U,VAL,X
+5 SET (ENT,X)=""
SET U="^"
SET INST=1
SET VAL=$SELECT(SEL="E":1,1:0)
+6 SET PAR=$QSUBSCRIPT($QUERY(^XTV(8989.1,"B","OR BILLING AWARENESS BY USER")),4)
+7 DO SCRHDR
WRITE !!
+8 FOR X=1:1:^TMP("ORPUL",$JOB,"A")
Begin DoDot:1
+9 WRITE "."
+10 SET ENT=$PIECE(^TMP("ORPUL",$JOB,"B",X),U,2)_";VA(200,"
+11 DO ADD^XPAR(ENT,PAR,INST,VAL,.ORERR)
End DoDot:1
+12 SET DIR(0)="E"
SET DIR("A")=$SELECT(SEL="E":$PIECE($TEXT(MEC),";",3),1:$PIECE($TEXT(MDC),";",3))
+13 DO ^DIR
KILL DIR
QUIT
SCRHDR ;Screen Header
+1 IF $DATA(IOF)
WRITE @IOF
+2 WRITE !,$PIECE($TEXT(SH),";",3),!
+3 IF SEL=""
WRITE $PIECE($TEXT(SHA),";",3)
+4 IF SEL="E"
WRITE $PIECE($TEXT(SHAE),";",3)
+5 IF SEL="D"
WRITE $PIECE($TEXT(SHAD),";",3)
+6 IF SEL="I"
WRITE $PIECE($TEXT(SHAI),";",3)
+7 QUIT
+8 ;;Text for user messages, selection options, user help
ALLPA ;;All providers have been assigned the parameter.
SOOPT ;;SO^
SXOPT ;;SX^
SH ;;Enable Clinical Indicator Data Capture By Provider Parameter Management
SHA ;;Assign Parameter To Provider Option
SHAE ;;Assign/Enable Parameter For All Providers Option
SHAD ;;Assign/Disable Parameter For All Providers Option
SHAI ;;Assign and Enable/Disable Parameter By Individual Provider Option
MMPA ;;All providers have the Enable CIDC By User parameter assigned.
DH ;;Select the provider who the parameter will be assigned to.
DHN ;;Enter N to get the next 10 providers in the list.
DHP ;;Enter P to get the previous 10 providers in the list.
DHQ ;;Enter Q to quit and return to previous menu.
D0N ;;N:Next 10 providers
D0P ;;P:Previous 10 providers
D0Q ;;Q:Quit
DA ;;Select the provider to assign the parameter
MEP ;;Now assigning and enabling the Clinical Indicatr Data Capture parameter
MEC ;;Assignment and enable Clinical Indicator Data Capture complete
MDP ;;Now assigning and disabling the Clinical Indicator Data Capture parameter
MDC ;;Assignment and disable Clinical Indicator Data Capture complete
