- ZU ;SF/JLI,RWF - For DSM, TIE ALL TERMINALS TO THIS ROUTINE!! ;07/09/2001 13:31 [ 07/29/2004 9:01 AM ]
- ;;8.0;KERNEL;**13,24,84,94,118,162,225**;Jul 10, 1995
- ;FOR VAX-DSM V5 & V6
- EN ;See that escape processing is off, Conflict with Screenman
- S X=$&ZLIB.%DISABLCTRL($C(25)) U $I:(NOCENABLE:NOESCAPE)
- D:+$G(^%ZTSCH("LOGRSRC")) LOGRSRC^%ZOSV("$LOGIN$")
- S (ZUGUI1,ZUGUI2)="" ;$&ZLIB.%TRNLNM("DECW$DISPLAY",,,,,"VALUE")
- N $ESTACK,$ETRAP S $ETRAP="S %ZTER11S=$STACK D ERR^ZU Q:$QUIT 0 Q"
- ;Only call ShareLic for Telnet connections.
- D:$I["_TNA" SHARELIC^%ZOSV(0)
- G ^XUS
- ;
- G ;Entry point for GUI device.
- Q ;S ZUGUI1=1 G EN
- ERR ;Come here on error
- I $ZE["STKOVR" S $ET="Q:$ST>"_($ST-8)_" D ERR2^ZU" Q
- ERR2 S $ETRAP="D UNWIND^ZU" L U $I:NOCENABLE
- Q:$ECODE["<PROG>"
- I $ZE["^XUS1A:2, %DSM-E-WRITERR" G HALT
- I $G(IO)]"",$D(IO(1,IO)),$E($G(IOST))="P" U IO W @$S($D(IOF):IOF,1:"#")
- I $G(IO(0))]"" U IO(0) W !!,"RECORDING THAT AN ERROR OCCURRED ---",!!?15,"Sorry 'bout that",!,*7,!?10,"$STACK=",$STACK," $ECODE=",$ECODE,!?10,"$ZERROR=",$ZERROR
- D ^%ZTER K %ZT S XUERF="" ; Capture symbol table first!
- I $D(%ZTERROR),$P(%ZTERROR,"^",2)="F" H ; Halt immediately for disaster type FATAL errors
- ;U $I:NOCENABLE D PROGMODE^%ZOSV I Y U $I:CENABLE Q
- I $G(DUZ)'>0 HALT
- ;
- CTRLC I $D(IO)=11 U IO(0) C:IO'=IO(0) IO S IO=IO(0)
- W:$ZE["-CTLC" !,"--Interrupt Acknowledged",!
- D KILL1^XUSCLEAN ;Clean up symbol table
- S $ECODE=",<<POP>>,"
- Q
- ;
- UNWIND ;Unwind the stack
- Q:$ESTACK>1 G CONT:$ECODE["<<HALT>>",CTRLC2:$ECODE["<<POP>>"
- S $ECODE=""
- Q
- ;
- CTRLC2 S $ECODE="" G:$G(^XUTL("XQ",$J,"T"))<2 ^XUSCLEAN
- S ^XUTL("XQ",$J,"T")=1,XQY=$G(^(1)),XQY0=$P(XQY,"^",2,99)
- G:$P(XQY0,"^",4)'="M" CTRLC2
- S XQPSM=$P(XQY,"^",1),XQY=+XQPSM,XQPSM=$P(XQPSM,XQY,2,3)
- G:'XQY ^XUSCLEAN
- S $ECODE="",$ETRAP="S %ZTER11S=$STACK D ERR^ZU Q:$QUIT 0 Q"
- U $I:NOESCAPE G M1^XQ
- ;
- HALT I $D(^XUTL("XQ",$J)) D:$D(DUZ)#2 BYE^XUSCLEAN
- I '$ESTACK G CONT
- S $ETRAP="D UNWIND^ZU" ;Set new trap
- S $ECODE=",<<HALT>>," ;Cause error to unwind stack
- D:+$G(^%ZTSCH("LOGRSRC")) LOGRSRC^%ZOSV("$LOGOUT$")
- Q
- CONT ;
- S $ECODE="",$ETRAP=""
- D:+$G(^%ZTSCH("LOGRSRC")) LOGRSRC^%ZOSV("$LOGOUT$")
- ;Halt If User changed UCI's
- I $&ZLIB.%GETSYM("DHCP$UCI_CHANGE") HALT
- ;Quit up to ZSLOT
- I $L($&ZLIB.%GETSYM("ZSLOT")) QUIT
- ;Halt If a dialup line
- S %=$&ZLIB.%GETDVI($I,"TT_DIALUP") I %!$D(XQXFLG("HALT")) HALT
- ;Halt If a Telnet connection
- I ($P["_TNA")!$D(XQXFLG("HALT")) HALT
- S X="Waiting "_($J#1000000) D SETENV^%ZOSV ;Change VMS name
- ;For sites that want to retain the connection, uncomment the next line
- ;U $I:NOCENABLE R !,"Enter return to continue: ",X:600 S:'$T X="^" G:X'="^" ^ZU
- HALT
- SLOT ;Entry point from ZSLOT
- N ZIO,ZTIME
- D LOG G EN
- ;
- LOG ;Define some nessary Logical names for ZSLOT
- S %=$&ZLIB.%CRELOG("SYS$INPUT",$I,"SUPERVISOR")
- S %=$&ZLIB.%CRELOG("SYS$OUTPUT",$I,"SUPERVISOR")
- S %=$&ZLIB.%CRELOG("SYS$COMMAND",$I,"SUPERVISOR")
- Q
- ZU ;SF/JLI,RWF - For DSM, TIE ALL TERMINALS TO THIS ROUTINE!! ;07/09/2001 13:31 [ 07/29/2004 9:01 AM ]
- +1 ;;8.0;KERNEL;**13,24,84,94,118,162,225**;Jul 10, 1995
- +2 ;FOR VAX-DSM V5 & V6
- EN ;See that escape processing is off, Conflict with Screenman
- +1 SET X=$&ZLIB.%DISABLCTRL($CHAR(25))
- USE $IO:(NOCENABLE:NOESCAPE)
- +2 IF +$GET(^%ZTSCH("LOGRSRC"))
- DO LOGRSRC^%ZOSV("$LOGIN$")
- +3 ;$&ZLIB.%TRNLNM("DECW$DISPLAY",,,,,"VALUE")
- SET (ZUGUI1,ZUGUI2)=""
- +4 NEW $ESTACK,$ETRAP
- SET $ETRAP="S %ZTER11S=$STACK D ERR^ZU Q:$QUIT 0 Q"
- +5 ;Only call ShareLic for Telnet connections.
- +6 IF $IO["_TNA"
- DO SHARELIC^%ZOSV(0)
- +7 GOTO ^XUS
- +8 ;
- G ;Entry point for GUI device.
- +1 ;S ZUGUI1=1 G EN
- QUIT
- ERR ;Come here on error
- +1 IF $ZE["STKOVR"
- SET $ETRAP="Q:$ST>"_($STACK-8)_" D ERR2^ZU"
- QUIT
- ERR2 SET $ETRAP="D UNWIND^ZU"
- LOCK
- USE $IO:NOCENABLE
- +1 IF $ECODE["<PROG>"
- QUIT
- +2 IF $ZE["^XUS1A:2, %DSM-E-WRITERR"
- GOTO HALT
- +3 IF $GET(IO)]""
- IF $DATA(IO(1,IO))
- IF $EXTRACT($GET(IOST))="P"
- USE IO
- WRITE @$SELECT($DATA(IOF):IOF,1:"#")
- +4 IF $GET(IO(0))]""
- USE IO(0)
- WRITE !!,"RECORDING THAT AN ERROR OCCURRED ---",!!?15,"Sorry 'bout that",!,*7,!?10,"$STACK=",$STACK," $ECODE=",$ECODE,!?10,"$ZERROR=",$ZERROR
- +5 ; Capture symbol table first!
- DO ^%ZTER
- KILL %ZT
- SET XUERF=""
- +6 ; Halt immediately for disaster type FATAL errors
- IF $DATA(%ZTERROR)
- IF $PIECE(%ZTERROR,"^",2)="F"
- HANG
- +7 ;U $I:NOCENABLE D PROGMODE^%ZOSV I Y U $I:CENABLE Q
- +8 IF $GET(DUZ)'>0
- HALT
- +9 ;
- CTRLC IF $DATA(IO)=11
- USE IO(0)
- IF IO'=IO(0)
- CLOSE IO
- SET IO=IO(0)
- +1 IF $ZE["-CTLC"
- WRITE !,"--Interrupt Acknowledged",!
- +2 ;Clean up symbol table
- DO KILL1^XUSCLEAN
- +3 SET $ECODE=",<<POP>>,"
- +4 QUIT
- +5 ;
- UNWIND ;Unwind the stack
- +1 IF $ESTACK>1
- QUIT
- IF $ECODE["<<HALT>>"
- GOTO CONT
- IF $ECODE["<<POP>>"
- GOTO CTRLC2
- +2 SET $ECODE=""
- +3 QUIT
- +4 ;
- CTRLC2 SET $ECODE=""
- IF $GET(^XUTL("XQ",$JOB,"T"))<2
- GOTO ^XUSCLEAN
- +1 SET ^XUTL("XQ",$JOB,"T")=1
- SET XQY=$GET(^(1))
- SET XQY0=$PIECE(XQY,"^",2,99)
- +2 IF $PIECE(XQY0,"^",4)'="M"
- GOTO CTRLC2
- +3 SET XQPSM=$PIECE(XQY,"^",1)
- SET XQY=+XQPSM
- SET XQPSM=$PIECE(XQPSM,XQY,2,3)
- +4 IF 'XQY
- GOTO ^XUSCLEAN
- +5 SET $ECODE=""
- SET $ETRAP="S %ZTER11S=$STACK D ERR^ZU Q:$QUIT 0 Q"
- +6 USE $IO:NOESCAPE
- GOTO M1^XQ
- +7 ;
- HALT IF $DATA(^XUTL("XQ",$JOB))
- IF $DATA(DUZ)#2
- DO BYE^XUSCLEAN
- +1 IF '$ESTACK
- GOTO CONT
- +2 ;Set new trap
- SET $ETRAP="D UNWIND^ZU"
- +3 ;Cause error to unwind stack
- SET $ECODE=",<<HALT>>,"
- +4 IF +$GET(^%ZTSCH("LOGRSRC"))
- DO LOGRSRC^%ZOSV("$LOGOUT$")
- +5 QUIT
- CONT ;
- +1 SET $ECODE=""
- SET $ETRAP=""
- +2 IF +$GET(^%ZTSCH("LOGRSRC"))
- DO LOGRSRC^%ZOSV("$LOGOUT$")
- +3 ;Halt If User changed UCI's
- +4 IF $&ZLIB.%GETSYM("DHCP$UCI_CHANGE")
- HALT
- +5 ;Quit up to ZSLOT
- +6 IF $LENGTH($&ZLIB.%GETSYM("ZSLOT"))
- QUIT
- +7 ;Halt If a dialup line
- +8 SET %=$&ZLIB.%GETDVI($IO,"TT_DIALUP")
- IF %!$DATA(XQXFLG("HALT"))
- HALT
- +9 ;Halt If a Telnet connection
- +10 IF ($PRINCIPAL["_TNA")!$DATA(XQXFLG("HALT"))
- HALT
- +11 ;Change VMS name
- SET X="Waiting "_($JOB#1000000)
- DO SETENV^%ZOSV
- +12 ;For sites that want to retain the connection, uncomment the next line
- +13 ;U $I:NOCENABLE R !,"Enter return to continue: ",X:600 S:'$T X="^" G:X'="^" ^ZU
- +14 HALT
- SLOT ;Entry point from ZSLOT
- +1 NEW ZIO,ZTIME
- +2 DO LOG
- GOTO EN
- +3 ;
- LOG ;Define some nessary Logical names for ZSLOT
- +1 SET %=$&ZLIB.%CRELOG("SYS$INPUT",$IO,"SUPERVISOR")
- +2 SET %=$&ZLIB.%CRELOG("SYS$OUTPUT",$IO,"SUPERVISOR")
- +3 SET %=$&ZLIB.%CRELOG("SYS$COMMAND",$IO,"SUPERVISOR")
- +4 QUIT
