Home   Package List   Routine Alphabetical List   Global Alphabetical List   FileMan Files List   FileMan Sub-Files List   Package Component Lists   Package-Namespace Mapping  
Info |  Details |  All
Print Page as PDF
Sub-Field: 62.9001

Package: Automated Lab Instruments

LAB SHIPPING CONFIGURATION(#62.9)-->62.9001

Sub-Field: 62.9001


Information

Parent File Name Number Package
LAB SHIPPING CONFIGURATION(#62.9) TEST/PROFILE 62.9001 Automated Lab Instruments

Details

Field # Name Loc Type Details
.01 TEST/PROFILE 0;1 POINTER TO LABORATORY TEST FILE (#60) LABORATORY TEST(#60)

  • LAST EDITED:  APR 21, 1997
  • HELP-PROMPT:  Enter the laboratory test that is used by this shipping configuration.
  • DESCRIPTION:  This field contains the laboratory test which should be built onto a shipping manifest. Both atomic and cosmic (panel) tests can be selected. The test on the accession must match exactly the test entered in this field.
    No expanding of panels occurs.
  • CROSS-REFERENCE:  62.9001^B
    1)= S ^LAHM(62.9,DA(1),60,"B",$E(X,1,30),DA)=""
    2)= K ^LAHM(62.9,DA(1),60,"B",$E(X,1,30),DA)
.02 ACCESSION AREA 0;2 POINTER TO ACCESSION FILE (#68)
************************REQUIRED FIELD************************
ACCESSION(#68)

  • LAST EDITED:  AUG 08, 1997
  • HELP-PROMPT:  Enter the accession area to search for this test.
  • DESCRIPTION:  COLLECTION FACILITIES:
    This field is used to designate the accession area to check when searching for tests to build onto a shipping manifest. If it is blank then the building process will skip over this test.
    HOST FACILITIES: Not used by software at host facilities.
.025 DIVISION 0;10 POINTER TO INSTITUTION FILE (#4) INSTITUTION(#4)

  • LAST EDITED:  SEP 21, 2001
  • HELP-PROMPT:  Enter the accession's division (?? - additional help).
  • DESCRIPTION:  Collecting facilities:
    If the manifest building process should only build accessions' from a certain division on a manifest then enter the division to screen these accessions. The division used here will be the division associated with the
    user who created the accession.  This field will allow a site to screen accessions from multiple divisions, only placing on the manifest an accession from the specified division.
    Host facilities: This field not used.
.03 SPECIMEN 0;3 POINTER TO TOPOGRAPHY FIELD FILE (#61) TOPOGRAPHY FIELD(#61)

  • LAST EDITED:  AUG 11, 1997
  • HELP-PROMPT:  Enter the specimen type for this test. If left blank then all specimen types will be selected.
  • DESCRIPTION:  This field is used to determine if a test for a particular specimen type should build on the shipping manifest. If left blank, i.e. no entry then all specimens for this test are eligible for building on a shipping
    manifest.  If a specimen type is entered then the specimen type of the accession must match before the test is eligible for building onto a shipping manifest.
.04 URGENCY 0;4 POINTER TO URGENCY FILE (#62.05) URGENCY(#62.05)

  • INPUT TRANSFORM:  S DIC("S")="I Y<50" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
  • LAST EDITED:  APR 21, 1997
  • HELP-PROMPT:  Collecting facility - if only certain urgencies are shipped, specify the accession's test urgency. Host facility - see field description (??) for information.
  • DESCRIPTION:  COLLECTING FACILITIES:
    If shipping laboratory tests that are a certain urgency, specify the urgency that must match the test urgency of the accession for the accession/test to be placed on the shipping manifest.
    HOST FACILITIES:
    This field is used by LEDI software at the host facility to determine the entry in the host site's URGENCY file (#62.05) to use for ordering when the host site has more than one entry in the URGENCY file (#62.05) that
    maps to the same HL7 PRIORITY.
    Example: Host site has three urgencies which
    map to HL7 PRIORITY: ROUTINE (R).
    Entry #     Name                LEDI HL7
    -------     ---------------     --------
    2          PATIENT WAITING     ROUTINE
    9          ROUTINE             ROUTINE
    10          NO RUSH             ROUTINE
    If there is no mapping defined for this field,
    then the LEDI software will use the last entry
    in the URGENCY file that maps to HL7 PRIORITY:
    ROUTINE (R); workload urgencies are excluded.
    In this case the test would be ordered with a
    URGENCY of NO RUSH.
    If the host site enters a mapping in this field,
    i.e. ROUTINE then the test will be ordered using
    the host site's entry for ROUTINE in the URGENCY
    file when the HL7 PRIORITY matches.
  • SCREEN:  S DIC("S")="I Y<50"
  • EXPLANATION:  Select regular urgencies only. Workload urgencies are excluded.
.05 SPECIMEN CONTAINER 0;5 POINTER TO LAB SHIPPING CONTAINER FILE (#62.91)
************************REQUIRED FIELD************************
LAB SHIPPING CONTAINER(#62.91)

  • INPUT TRANSFORM:  S DIC("S")="N LA7X S LA7X=$P(^LAHM(62.91,Y,0),U,2) I LA7X>1,LA7X<4" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
  • LAST EDITED:  JUN 04, 1997
  • HELP-PROMPT:  Enter the specimen container to use for shipping purposes.
  • DESCRIPTION:  COLLECTING FACILITIES:
    The container used to hold the specimen. This could be the original collection container or a tube/vial/jar that the specimen is transferred to prior to shipment to another facility. It is the container that actually
    hold/contains the specimen.
    HOST FACILITIES:
    This field is presently not used by LEDI software at the host facility.
  • SCREEN:  S DIC("S")="N LA7X S LA7X=$P(^LAHM(62.91,Y,0),U,2) I LA7X>1,LA7X<4"
  • EXPLANATION:  Only containers of type "PRIMARY" or "ALIQUOT" can be selected.
.06 SHIPPING CONDITION 0;6 POINTER TO LAB SHIPPING CONDITIONS FILE (#62.93)
************************REQUIRED FIELD************************
LAB SHIPPING CONDITIONS(#62.93)

  • LAST EDITED:  MAY 07, 1997
  • HELP-PROMPT:  Select the shipping condition under which this test is transported.
  • DESCRIPTION:  COLLECTING FACILITIES:
    This field describes under what temperature/environmental condition the specimen is to be shipped. Examples would be frozen, refrigerated or ambient temperature.
    HOST FACILITIES:
    This field is presently not used by LEDI software at the host facility.
.07 PACKAGING CONTAINER 0;7 POINTER TO LAB SHIPPING CONTAINER FILE (#62.91) LAB SHIPPING CONTAINER(#62.91)

  • INPUT TRANSFORM:  S DIC("S")="I $P(^LAHM(62.91,Y,0),U,2)=1" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
  • LAST EDITED:  JUN 05, 1997
  • HELP-PROMPT:  Select the packaging container used to hold the specimen container during shipment.
  • DESCRIPTION:  COLLECTING FACILITIES:
    This field is used to determine what packaging container a test's specimen container is placed in when the specimen is being shipped to another facility.
    HOST FACILITIES:
    This field is presently not used by LEDI software at the host facility.
  • SCREEN:  S DIC("S")="I $P(^LAHM(62.91,Y,0),U,2)=1"
  • EXPLANATION:  Only shipping containers of type "PACKAGING" can be selected.
.08 SPECIMEN LABEL 0;8 SET
  • '0' FOR NO LABEL;
  • '1' FOR PLAIN;
  • '2' FOR CODE 39;
  • '3' FOR CODE 39/CHECK DIGIT;
  • '4' FOR CODE 128;

  • LAST EDITED:  JUL 01, 1997
  • HELP-PROMPT:  Select if labels and barcodes should be printed.
  • DESCRIPTION:  Field is presently NOT USED by the software. Will be utilized in a later version of LEDI when shipping labels are implemented.
    COLLECTING FACILITIES:
    This field is used to designate if specimen labels should be printed when a shipping manifest is built. If labels are to be printed then the type of barcode can be designated to allow a collecting facility to tailor the
    barcode type to the needs of the host facility.
    HOST FACILITIES:
    This field is presently not used by LEDI software at the host facility.
.09 HOST COLLECTION SAMPLE 0;9 POINTER TO COLLECTION SAMPLE FILE (#62) COLLECTION SAMPLE(#62)

  • LAST EDITED:  AUG 08, 1997
  • HELP-PROMPT:  Enter the collection sample to be associated with this test.
  • DESCRIPTION:  COLLECTING FACILITIES:
    This field is presently not used by LEDI software at the collecting facility.
    HOST FACILITIES:
    This field is used by host facility laboratories to designate the collection sample to be used when processing electronic orders for this test/specimen combination. It is used to build the order in file # 69.6, LAB
    PENDING ORDERS, with the test/specimen/collection sample that the host facility uses.
1.1 REQUIRE PATIENT HEIGHT 1;1 SET
  • '0' FOR NO;
  • '1' FOR YES;

  • LAST EDITED:  NOV 13, 1998
  • HELP-PROMPT:  Is patient's height required to be sent with order for this test.
  • DESCRIPTION:  
    Allows site to specify that the patient's height be sent with an order for this test. Patient's height will be prompted for and printed on manifest.
1.15 PATIENT HEIGHT UNITS 1;2 POINTER TO LAB ELECTRONIC CODES FILE (#64.061) LAB ELECTRONIC CODES(#64.061)

  • INPUT TRANSFORM:  S DIC("S")="I $P(^(0),U,7)=""M""" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
  • LAST EDITED:  NOV 13, 1998
  • DESCRIPTION:  
    Units used to measure the patient's height.  Select an entry from the LAB ELECTRONIC CODE file (#64.061) that are measurements.
  • SCREEN:  S DIC("S")="I $P(^(0),U,7)=""M"""
  • EXPLANATION:  Only codes that are measurements are selectable.
1.16 PATIENT HEIGHT CODE 1;5 POINTER TO LAB LOINC FILE (#95.3) LAB LOINC(#95.3)

  • INPUT TRANSFORM:  S DIC("S")="I $$GET1^DIQ(95.3,Y_"","",1)=""BODY HEIGHT""" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
  • LAST EDITED:  AUG 31, 2001
  • HELP-PROMPT:  Enter the appropriate LOINC code to identify the patient's height
  • DESCRIPTION:  
    Select the appropriate LOINC code to identify the patient's height.
  • SCREEN:  S DIC("S")="I $$GET1^DIQ(95.3,Y_"","",1)=""BODY HEIGHT"""
  • EXPLANATION:  Only allow selection of LOINC codes with "BODY HEIGHT" component.
1.2 REQUIRE PATIENT WEIGHT 1;3 SET
  • '0' FOR NO;
  • '1' FOR YES;

  • LAST EDITED:  NOV 13, 1998
  • DESCRIPTION:  Determines if the patient's weight is required to be sent in the HL7 ORM order message and printed on the shipping manifest. Actual shipping and/or electronic transmission of a shipping manifest will check for entry of
    the patient's weight and prevent release if absent.
1.25 PATIENT WEIGHT UNITS 1;4 POINTER TO LAB ELECTRONIC CODES FILE (#64.061) LAB ELECTRONIC CODES(#64.061)

  • INPUT TRANSFORM:  S DIC("S")="I $P(^(0),U,7)=""M""" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
  • LAST EDITED:  NOV 13, 1998
  • DESCRIPTION:  
    Units used to measure the patient's weight.  Select an entry from the LAB ELECTRONIC CODE file (#64.061) that are measurements.
  • SCREEN:  S DIC("S")="I $P(^(0),U,7)=""M"""
  • EXPLANATION:  Only codes that are measurements are selectable.
1.26 PATIENT WEIGHT CODE 1;6 POINTER TO LAB LOINC FILE (#95.3) LAB LOINC(#95.3)

  • INPUT TRANSFORM:  S DIC("S")="I $$GET1^DIQ(95.3,Y_"","",1)=""BODY WEIGHT""" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
  • LAST EDITED:  AUG 31, 2001
  • HELP-PROMPT:  Enter the appropriate LOINC code to identify the patient's weight.
  • DESCRIPTION:  
    Select the appropriate LOINC code to identify the patient's weight.
  • SCREEN:  S DIC("S")="I $$GET1^DIQ(95.3,Y_"","",1)=""BODY WEIGHT"""
  • EXPLANATION:  Only allow selection of LOINC codes with "BODY WEIGHT" component.
2.1 REQUIRE COLLECTION VOLUME 2;1 SET
  • '0' FOR NO;
  • '1' FOR YES;

  • LAST EDITED:  NOV 10, 1998
  • DESCRIPTION:  Determines if the specimen's collection volume is required to be sent in the HL7 ORM order message and printed on the shipping manifest. Actual shipping and/or electronic transmission of a shipping manifest will check
    for entry of the specimen's collection volume and prevent release if absent.
2.15 COLLECTION VOLUME UNITS 2;2 POINTER TO LAB ELECTRONIC CODES FILE (#64.061) LAB ELECTRONIC CODES(#64.061)

  • INPUT TRANSFORM:  S DIC("S")="I $P(^(0),U,7)=""M""" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
  • LAST EDITED:  NOV 10, 1998
  • DESCRIPTION:  
    Units used to measure the specimen's collection volume.  Select an entry from the LAB ELECTRONIC CODE file #64.061) that is a measurement.
  • SCREEN:  S DIC("S")="I $P(^(0),U,7)=""M"""
  • EXPLANATION:  Only codes that are measurements are selectable.
2.16 COLLECTION VOLUME CODE 2;7 POINTER TO LAB LOINC FILE (#95.3) LAB LOINC(#95.3)

  • INPUT TRANSFORM:  S DIC("S")="I $$GET1^DIQ(95.3,Y_"","",1)=""SPECIMEN VOLUME""" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
  • LAST EDITED:  AUG 31, 2001
  • HELP-PROMPT:  Enter the appropriate LOINC code to identify this specimen's volume
  • DESCRIPTION:  
    Enter the appropriate LOINC code to identify the specimen's collection volume.
  • SCREEN:  S DIC("S")="I $$GET1^DIQ(95.3,Y_"","",1)=""SPECIMEN VOLUME"""
  • EXPLANATION:  Only allow selection of LOINC codes with "SPECIMEN VOLUME" component.
2.2 REQUIRE COLLECTION END D/T 2;3 SET
  • '0' FOR NO;
  • '1' FOR YES;

  • LAST EDITED:  MAY 20, 1998
  • DESCRIPTION:  Determines if the specimen's collection end date/time is required to be sent in the HL7 ORM order message and printed on the shipping manifest. Actual shipping and/or electronic transmission of a shipping manifest will
    check for entry of the specimen's collection end date/time and prevent release if absent.
2.25 COLLECTION DURATION UNITS 2;4 POINTER TO LAB ELECTRONIC CODES FILE (#64.061) LAB ELECTRONIC CODES(#64.061)

  • INPUT TRANSFORM:  S DIC("S")="N LA7X S LA7X=$G(^LAB(64.061,Y,0)) I $P(LA7X,U)?.(1""s"",1""min"",1""hr""),$P(LA7X,U,7)=""M""" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
  • LAST EDITED:  MAY 19, 1998
  • DESCRIPTION:  
    Units used to calculate the specimen's collection duration.  Select an entry from the LAB ELECTRONIC CODE file (#64.061) that is a measurement and relates to time.
  • SCREEN:  S DIC("S")="N LA7X S LA7X=$G(^LAB(64.061,Y,0)) I $P(LA7X,U)?.(1""s"",1""min"",1""hr""),$P(LA7X,U,7)=""M"""
  • EXPLANATION:  Only codes that are measurements and relate to time (seconds, minutes, hours) are selectable.
2.26 COLLECTION DURATION CODE 2;8 POINTER TO LAB LOINC FILE (#95.3) LAB LOINC(#95.3)

  • INPUT TRANSFORM:  S DIC("S")="I $$GET1^DIQ(95.3,Y_"","",1)=""COLLECTION DURATION""" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
  • LAST EDITED:  AUG 31, 2001
  • HELP-PROMPT:  Enter the appropriate LOINC code to identify this specimen's collection duration.
  • DESCRIPTION:  
    Enter the appropriate LOINC code to identify the specimen's collection duration.
  • SCREEN:  S DIC("S")="I $$GET1^DIQ(95.3,Y_"","",1)=""COLLECTION DURATION"""
  • EXPLANATION:  Only allow selection of LOINC codes with "COLLECTION DURATION" component.
2.3 REQUIRE COLLECTION WEIGHT 2;5 SET
  • '0' FOR NO;
  • '1' FOR YES;

  • LAST EDITED:  NOV 10, 1998
  • DESCRIPTION:  Determines if the specimen's collection weight is required to be sent in the HL7 ORM order message and printed on the shipping manifest. Actual shipping and/or electronic transmission of a shipping manifest will check
    for entry of the specimen's collection weight and prevent release if absent.
2.35 COLLECTION WEIGHT UNITS 2;6 POINTER TO LAB ELECTRONIC CODES FILE (#64.061) LAB ELECTRONIC CODES(#64.061)

  • INPUT TRANSFORM:  S DIC("S")="I $P(^(0),U,7)=""M""" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
  • LAST EDITED:  NOV 10, 1998
  • DESCRIPTION:  
    Units used to measure the specimen's collection weight.  Select an entry from the LAB ELECTRONIC CODE file ( #64.061) that is a measurement.
  • SCREEN:  S DIC("S")="I $P(^(0),U,7)=""M"""
  • EXPLANATION:  Only codes that are measurements are selectable.
2.36 COLLECTION WEIGHT CODE 2;9 POINTER TO LAB LOINC FILE (#95.3) LAB LOINC(#95.3)

  • INPUT TRANSFORM:  S DIC("S")="I $$GET1^DIQ(95.3,Y_"","",1)=""SPECIMEN MASS""" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
  • LAST EDITED:  AUG 31, 2001
  • HELP-PROMPT:  Enter the appropriate LOINC code to identify this specimen's weight.
  • DESCRIPTION:  
    Enter the appropriate LOINC code to identify the specimen's collection weight.
  • SCREEN:  S DIC("S")="I $$GET1^DIQ(95.3,Y_"","",1)=""SPECIMEN MASS"""
  • EXPLANATION:  Only allow selection of LOINC codes with "SPECIMEN MASS" component.
5.1 NON-NLT TEST ORDER CODE 5;1 FREE TEXT

  • INPUT TRANSFORM:  K:$L(X)>20!($L(X)<1) X
  • LAST EDITED:  JUN 24, 2004
  • HELP-PROMPT:  Answer must be 1-20 characters in length.
  • DESCRIPTION:  Collecting facilities:
    If sending test orders to a non-VistA system use this field to store the test order codes used by the non-VistA system. It will be used when the TEST CODING SYSTEM field (#.14) is set to "NON-VA".
    Host facilities:
    If receiving test orders from a non-VistA system that does not use VA National Laboratory Test (NLT) codes use this field to map the collecting system's test order codes to the corresponding VistA laboratory test.
5.2 NON-NLT TEST ORDER NAME 5;2 FREE TEXT

  • INPUT TRANSFORM:  K:$L(X)>100!($L(X)<1) X
  • LAST EDITED:  NOV 05, 2004
  • HELP-PROMPT:  Answer must be 1-100 characters in length.
  • DESCRIPTION:  Collecting facility:
    If sending test orders to a non-VistA system use this field to store the test order name used by the non-VistA system. VistA uses this test name to identify to the non-VistA system the ordered test when orders are
    transmitted electronically.  It will be used when the TEST CODING SYSTEM field (#.14) is set to "NON-VA".
    Host facility:
    Not used - mapping of non-VA tests coding systems for test order codes is via NON-NLT TEST ORDER CODE field (#5.1).
5.3 NON-HL7 SPECIMEN CODE 5;3 FREE TEXT

  • INPUT TRANSFORM:  K:$L(X)>10!($L(X)<1) X
  • LAST EDITED:  NOV 05, 2004
  • HELP-PROMPT:  Answer must be 1-10 characters in length
  • DESCRIPTION:  Collecting facilities:
    If sending test orders to a non-VistA system that does not use HL7 Table 0070 Specimen Source, use this field to store the specimen code used by the non-VistA system. It is only used when the value of field SPECIMEN
    CODING SYSTEM (#.15) is LOCAL-NON HL7.  It provides a means for a collecting facility to map non standard specimen codes to the site's TOPOGRAPHY FILED file (#61).
    Host facilities:
    If receiving test orders from a non-VistA system that does not use HL7 Table 0070 Specimen Source, use this field to store the specimen code used by the non-VistA system. It is only used when the value of field SPECIMEN
    CODING SYSTEM (#.15) is LOCAL-NON HL7.  It provides a means for a host facility to map non standard specimen codes to the site's TOPOGRAPHY FIELD file (#61).
5.4 NON-HL7 SPECIMEN NAME 5;4 FREE TEXT

  • INPUT TRANSFORM:  K:$L(X)>30!($L(X)<1) X
  • LAST EDITED:  NOV 05, 2004
  • HELP-PROMPT:  Answer must be 1-30 characters in length
  • DESCRIPTION:  Collecting facilities:
    If sending test orders to a non-VistA system that does not use HL7 Table 0070 Specimen Source, use this field to store the specimen name used by the non-VistA system. It is only used when the value of field SPECIMEN
    CODING SYSTEM (#.15) is LOCAL-NON HL7.  It provides a means for a collecting facility to map non standard specimen names to the site's TOPOGRAPHY FIELD file (#61).
    Host facilities:
    If receiving test orders from a non-VistA system that does not use HL7 Table 0070 Specimen Source, use this field to store the specimen name used by the non-VistA system. It is only used when the value of field SPECIMEN
    CODING SYSTEM (#.15) is LOCAL-NON HL7.  It provides a means for a host facility to map non standard specimen names to the site's TOPOGRAPHY FIELD file (#61).
5.5 NON-NLT TEST CODING SYSTEM 5;5 FREE TEXT

  • INPUT TRANSFORM:  K:$L(X)>10!($L(X)<1) X
  • LAST EDITED:  JUN 24, 2004
  • HELP-PROMPT:  Answer must be 1-10 characters in length
  • DESCRIPTION:  Collecting facilities:
    If sending test orders to a non-VA system that does not use VA National Laboratory Test (NLT) codes use this field to store the name of the coding system used by the non-VA system. It will be used when the TEST CODING
    SYSTEM field (#.14) is set to "NON-VA".  Name usually begins with "99" to indicate a local coding system in the HL7 Standard.
    Host facilities:
    If receiving test orders from a non-VA collecting facility that does not use VA NLT codes use this field to store the name of the coding system used by the non-VA system. It will be used when the TEST CODING SYSTEM field
    (#.14) is set to "NON-VA".  Name usually begins with "99" to indicate a local coding system in the HL7 Standard.
    NLT test codes are standard test codes used within the VA system to identify orderable and reportable laboratory tests.
5.6 NON-HL7 SPECIMEN CODING SYSTEM 5;6 FREE TEXT

  • INPUT TRANSFORM:  K:$L(X)>10!($L(X)<1) X
  • LAST EDITED:  JUN 24, 2004
  • HELP-PROMPT:  Answer must be 1-10 characters in length
  • DESCRIPTION:  Collecting facilities:
    If sending test orders to a non-VistA system that does not use HL7 Table 0070 Specimen Source, use this field to store the name of the coding system used by the non-VistA system. It will be used when the value of field
    SPECIMEN CODING SYSTEM (#.15) is LOCAL-NON HL7. Name usually begins with "99" to indicate a local coding system in the HL7 Standard.
    Host facilities:
    If receiving test orders from a non-VistA system that does not use HL7 Table 0070 Specimen Source, use this field to store the name of the coding system used by the non-VistA system. It will be used when the TEST CODING
    SYSTEM field (#.14) is set to "NON-VA". Name usually begins with "99" to indicate a local coding system in the HL7 Standard.
5.7 COLLECTION SAMPLE CODE 5;7 FREE TEXT

  • INPUT TRANSFORM:  K:$L(X)>10!($L(X)<1) X
  • LAST EDITED:  APR 26, 2004
  • HELP-PROMPT:  Answer must be 1-10 characters in length
  • DESCRIPTION:  Collecting facilities:
    If sending test orders to a non-VA facility that also requires a collection sample code use this field to store the collection sample code used by the non-VA system. It is only used when the value of field SPECIMEN
    CODING SYSTEM (#.15) is LOCAL-NON HL7.
    Host facilities: used to map collecting facility's "MI" subcript test's collection sample to host site's collection sample.
5.8 COLLECTION SAMPLE NAME 5;8 FREE TEXT

  • INPUT TRANSFORM:  K:$L(X)>30!($L(X)<1) X
  • LAST EDITED:  APR 26, 2004
  • HELP-PROMPT:  Answer must be 1-30 characters in length
  • DESCRIPTION:  Collecting facilities:
    If sending test orders to a non-VA facility that also requires a collection sample name use this field to store the collection sample name used by the non-VA system. It is only used when the value of field SPECIMEN
    CODING SYSTEM (#.15) is LOCAL-NON HL7.
    Host facilities: used to map collecting facility's "MI" subcript test's collection sample to host site's collection sample.
5.9 COLLECT SAMPLE SYSTEM 5;9 FREE TEXT

  • INPUT TRANSFORM:  K:$L(X)>10!($L(X)<1) X
  • LAST EDITED:  APR 26, 2004
  • HELP-PROMPT:  Answer must be 1-10 characters in length
  • DESCRIPTION:  Collecting facilities:
    If sending collection sample codes/names to a non-VA facility use this field to store the name of the coding system used by the non-VA system. It will be used when the TEST CODING SYSTEM field (#.14) is set to "NON-VA".
    Name usually begins with "99" to indicate a local coding system in the HL7 Standard.
    Host facilities: used to map collecting facility's "MI" subcript test's collection sample to host site's collection sample.
Info |  Details |  All