BGP4DGPU ; IHS/CMI/LAB - IHS AREA CLIN 05 REPORT DRIVER ;
;;14.1;IHS CLINICAL REPORTING;;MAY 29, 2014;Build 114
;
;
W:$D(IOF) @IOF
W !,$$CTR("IHS GPRA/GPRAMA Performance Report for a User Selected Date Range",80)
INTRO ;
D XIT
W !!,"This will produce a National GPRA/GPRAMA report for a year period you specify."
W !!,"You will be asked to provide: 1) the reporting period, 2) the baseline"
W !,"period to compare data to, 3) the Community taxonomy and 4) the patient"
W !,"population (i.e. AI/AN only, non AI/AN, or both) to determine which"
W !,"patients will be included."
W !!,"You can choose to export this data to the Area office. If you"
W !,"answer yes at the export prompt, a report will be produced in export format"
W !,"for the Area Office to use in Area aggregated data. Depending on site specific"
W !,"configuration, the export file will either be automatically transmitted "
W !,"directly to the Area or the site will have to send the file manually.",!
K DIR S DIR(0)="E",DIR("A")="Press enter to continue" D ^DIR K DIR
S BGPYGPU=1
D TAXCHK^BGP4XTCN
S X=$$DEMOCHK^BGP4UTL2()
I 'X W !!,"Exiting Report....." D PAUSE^BGP4DU,XIT Q
D XIT
ST ;
W !!
S DIR(0)="Y",DIR("A")="Do you want to run the report on a Patient Panel",DIR("B")="N" KILL DA D ^DIR KILL DIR
I $D(DIRUT) D XIT Q
I 'Y G DP
;get search template name
W !!,"Please enter the search template name. The template will contain a",!,"panel of patients defined by the user.",!
S DIC("S")="I $P(^(0),U,4)=2!($P(^(0),U,4)=9000001)" S DIC="^DIBT(",DIC("A")="Enter SEARCH TEMPLATE name: ",DIC(0)="AEMQ" D ^DIC K DIC,DA,DR,DICR
I Y=-1 G XIT
S BGPSEAT=+Y,BGPBEN=3
DP ;
K DIR
S BGPDESGP=""
S DIR(0)="S^E:Entire Facility;P:One Designated Provider",DIR("A")="Run the report for",DIR("B")="E" KILL DA D ^DIR KILL DIR
I $D(DIRUT) G ST
I Y="E" G TP
W !!
S DIC("A")="Which Designated Provider: ",DIC="^VA(200,",DIC(0)="AEMQ" D ^DIC K DIC,DA
I X="^" D XIT Q
I Y=-1 W !!,"provider is required, use an '^' to exit." G DP
S BGPDESGP=+Y
TP ;get time period
S BGPRTYPE=1,BGPYRPTH="",BGPYGPU=1
;
S (BGPBD,BGPED,BGPTP)=""
S DIR(0)="S^1:January 1 - December 31;2:April 1 - March 31;3:July 1 - June 30;4:October 1 - September 30;5:User-Defined Report Period",DIR("A")="Enter the date range for your report" KILL DA D ^DIR KILL DIR
I $D(DIRUT) D XIT Q
S BGPQTR=Y
I BGPQTR=5 D ENDDATE
I BGPQTR'=5 D F
I BGPPER="" W !,"Year not entered.",! G TP
I BGPQTR=1 S BGPBD=$E(BGPPER,1,3)_"0101",BGPED=$E(BGPPER,1,3)_"1231"
I BGPQTR=2 S BGPBD=($E(BGPPER,1,3)-1)_"0401",BGPED=$E(BGPPER,1,3)_"0331"
I BGPQTR=3 S BGPBD=($E(BGPPER,1,3)-1)_"0701",BGPED=$E(BGPPER,1,3)_"0630"
I BGPQTR=4 S BGPBD=($E(BGPPER,1,3)-1)_"1001",BGPED=$E(BGPPER,1,3)_"0930"
I BGPQTR=5 S BGPBD=$$FMADD^XLFDT(BGPPER,-364),BGPED=BGPPER,BGPPER=$E(BGPED,1,3)_"0000"
I BGPED>DT D G:BGPDO=1 TP
.W !!,"You have selected Current Report period ",$$FMTE^XLFDT(BGPBD)," through ",$$FMTE^XLFDT(BGPED),"."
.W !,"The end date of this report is in the future; your data will not be",!,"complete.",!
.K DIR S BGPDO=0 S DIR(0)="Y",DIR("A")="Do you want to change your Current Report Dates",DIR("B")="N" KILL DA D ^DIR KILL DIR
.I $D(DIRUT) S BGPDO=1 Q
.I Y S BGPDO=1 Q
.Q
BY ;get baseline year
S BGPVDT=""
W !!,"Enter the Baseline Year to compare data to.",!,"Use a 4 digit year, e.g. 1999, 2000"
S DIR(0)="D^::EP"
S DIR("A")="Enter Year (e.g. 2000)"
D ^DIR KILL DIR
I $D(DIRUT) G TP
I $D(DUOUT) S DIRUT=1 G TP
S BGPVDT=Y
I $E(Y,4,7)'="0000" W !!,"Please enter a year only!",! G BY
S X=$E(BGPPER,1,3)-$E(BGPVDT,1,3)
S X=X_"0000"
S BGPBBD=BGPBD-X,BGPBBD=$E(BGPBBD,1,3)_$E(BGPBD,4,7)
S BGPBED=BGPED-X,BGPBED=$E(BGPBED,1,3)_$E(BGPED,4,7)
S BGPPBD=($E(BGPBD,1,3)-1)_$E(BGPBD,4,7)
S BGPPED=($E(BGPED,1,3)-1)_$E(BGPED,4,7)
W !!,"The date ranges for this report are:"
W !?5,"Report Period: ",?31,$$FMTE^XLFDT(BGPBD)," to ",?31,$$FMTE^XLFDT(BGPED)
W !?5,"Previous Year Period: ",?31,$$FMTE^XLFDT(BGPPBD)," to ",?31,$$FMTE^XLFDT(BGPPED)
W !?5,"Baseline Period: ",?31,$$FMTE^XLFDT(BGPBBD)," to ",?31,$$FMTE^XLFDT(BGPBED)
I BGPPBD=BGPBBD,BGPPED=BGPBED K Y D CHKY I Y K BGPBBD,BGPBED,BGPPBD,BGPPED G BY
COMM ;
I $G(BGPSEAT) G MFIC
W !!,"Specify the community taxonomy to determine which patients will be",!,"included in the report. You should have created this taxonomy using QMAN.",!
K BGPTAX
S BGPTAXI=""
D ^XBFMK
S DIC("S")="I $P(^(0),U,15)=9999999.05",DIC="^ATXAX(",DIC(0)="AEMQ",DIC("A")="Enter the Name of the Community Taxonomy: "
S B=$P($G(^BGPSITE(DUZ(2),0)),U,5) I B S DIC("B")=$P(^ATXAX(B,0),U)
D ^DIC
I Y=-1 Q
S BGPTAXI=+Y
COM1 S X=0
F S X=$O(^ATXAX(BGPTAXI,21,X)) Q:'X D
.S BGPTAX($P(^ATXAX(BGPTAXI,21,X,0),U))=""
.Q
I '$D(BGPTAX) W !!,"There are no communities in that taxonomy." G COMM
S X=0,G=0
F S X=$O(^ATXAX(BGPTAXI,21,X)) Q:'X D
.S C=$P(^ATXAX(BGPTAXI,21,X,0),U)
.I '$D(^AUTTCOM("B",C)) W !!,"*** Warning: Community ",C," is in the taxonomy but does not",!,"exist in the community table. Please recreate your community taxonomy." S G=1
.Q
I G W !!,"The community taxonomy may not be accurate." D I BGPQUIT D XIT Q
.S BGPQUIT=0
.S DIR(0)="Y",DIR("A")="Do you wish to continue running the report" KILL DA D ^DIR KILL DIR
.I $D(DIRUT) S BGPQUIT=1
.I 'Y S BGPQUIT=1
.Q
MFIC K BGPQUIT
I $P($G(^BGPSITE(DUZ(2),0)),U,8)=1 D I BGPMFITI="" G COMM
.S BGPMFITI=""
.W !!,"Specify the LOCATION taxonomy to determine which patient visits will be"
.W !,"used to determine whether a patient is in the denominators for the report."
.W !,"You should have created this taxonomy using QMAN.",!
.K BGPMFIT
.S BGPMFITI=""
.D ^XBFMK
.S DIC("S")="I $P(^(0),U,15)=9999999.06",DIC="^ATXAX(",DIC(0)="AEMQ",DIC("A")="Enter the Name of the Location/Facility Taxonomy: "
.S B=$P($G(^BGPSITE(DUZ(2),0)),U,9) I B S DIC("B")=$P(^ATXAX(B,0),U)
.D ^DIC
.I Y=-1 Q
.S BGPMFITI=+Y
BEN ;
S X=0 F S X=$O(^BGPINDJ("GPRA",1,X)) Q:X'=+X S BGPIND(X)=""
S BGPINDJ="G"
I $G(BGPSEAT) G HOME
S BGPBEN=""
S DIR(0)="S^1:Indian/Alaskan Native (Classification 01);2:Not Indian Alaskan/Native (Not Classification 01);3:All (both Indian/Alaskan Natives and Non 01)"
S DIR("A")="Select Beneficiary Population to include in this report"
S DIR("B")="1" KILL DA D ^DIR KILL DIR
I $D(DIRUT) G COMM
S BGPBEN=Y,BGPBENF=Y(0)
HOME ;
S BGPHOME=$P($G(^BGPSITE(DUZ(2),0)),U,2)
I BGPHOME="" W !!,"Home Location not found in Site File!!",!,"PHN Visits counts to Home will be calculated using clinic 11 only!!" H 2 G AI
W !,"Your HOME location is defined as: ",$P(^DIC(4,BGPHOME,0),U)," asufac: ",$P(^AUTTLOC(BGPHOME,0),U,10)
AI ;gather all gpra measures
S X=0 F S X=$O(^BGPINDJ("GPRA",1,X)) Q:X'=+X S BGPIND(X)=""
S BGPINDJ="G"
EXPORT ;export to area or not?
S BGPEXPT=""
I $G(BGPDESGP) G EISSEX
I $D(BGPSEAT) G EISSEX
W ! S DIR(0)="Y",DIR("A")="Do you wish to export this data to Area" KILL DA D ^DIR KILL DIR
I $D(DIRUT) G BEN
S BGPEXPT=Y
EISSEX ;
S BGPEXCEL=""
S BGPUF=$$GETDIR^BGP4UTL2()
;I ^%ZOSF("OS")["PC"!(^%ZOSF("OS")["NT")!($P($G(^AUTTSITE(1,0)),U,21)=2) S BGPUF=$S($P($G(^AUTTSITE(1,1)),U,2)]"":$P(^AUTTSITE(1,1),U,2),1:"C:\EXPORT")
;I $P(^AUTTSITE(1,0),U,21)=1 S BGPUF="/usr/spool/uucppublic/"
I BGPEXPT,BGPUF="" W:'$D(ZTQUEUED) !!,"Cannot continue.....can't find export directory name. EXCEL file",!,"not written." D PAUSE^BGP4DU,XIT Q
SUM ;display summary of this report
W:$D(IOF) @IOF
W !,$$CTR("SUMMARY OF IHS GPRA/GPRAMA PERFORMANCE REPORT TO BE GENERATED")
W !,$$CTR($$RPTVER^BGP4BAN,80)
W !!,"The date ranges for this report are:"
W !?5,"Report Period: ",?31,$$FMTE^XLFDT(BGPBD)," to ",?31,$$FMTE^XLFDT(BGPED)
W !?5,"Previous Year Period: ",?31,$$FMTE^XLFDT(BGPPBD)," to ",?31,$$FMTE^XLFDT(BGPPED)
W !?5,"Baseline Period: ",?31,$$FMTE^XLFDT(BGPBBD)," to ",?31,$$FMTE^XLFDT(BGPBED)
I '$G(BGPSEAT) W !!,"The COMMUNITY Taxonomy to be used is: ",$P(^ATXAX(BGPTAXI,0),U)
I '$G(BGPSEAT) W !,"The Beneficiary Population is: ",BGPBENF
I $G(BGPSEAT) W !!,"The Patient Population is: ",$P(^DIBT(BGPSEAT,0),U,1)
I BGPHOME W !,"The HOME location is: ",$P(^DIC(4,BGPHOME,0),U)," ",$P(^AUTTLOC(BGPHOME,0),U,10)
I 'BGPHOME W !,"No HOME Location selected."
D TEXT^BGP4DSL
I $D(DIRUT) G BEN
D PT^BGP4DSL
I BGPROT="" G BEN
ZIS ;call to XBDBQUE
D REPORT^BGP4UTL
I $G(BGPQUIT) D XIT Q
I BGPRPT="" D XIT Q
I BGPEXPT D
.W !!,"A file will be created called BG141",$P(^AUTTLOC(DUZ(2),0),U,10)_"."_BGPRPT," and will reside",!,"in the ",BGPUF," directory.",!
.W !,"Depending on your site configuration, this file may need to be manually",!,"sent to your Area Office.",!
I BGPEXCEL,BGPEXPT D
.W !,"A file will be created called ",BGPFN,!,"and will reside in the ",BGPUF," directory. This file can be used in Excel.",!
K IOP,%ZIS I BGPROT="D",BGPDELT="F" D NODEV,XIT Q
K IOP,%ZIS W !! S %ZIS=$S(BGPDELT'="S":"PQM",1:"PM") D ^%ZIS
I POP W !,"Report Aborted" S DA=BGPRPT,DIK="^BGPGPDCJ(" D ^DIK K DIK D XIT Q
I POP W !,"Report Aborted" S DA=BGPRPT,DIK="^BGPGPDPJ(" D ^DIK K DIK D XIT Q
I POP W !,"Report Aborted" S DA=BGPRPT,DIK="^BGPGPDBJ(" D ^DIK K DIK D XIT Q
I $D(IO("Q")) G TSKMN
DRIVER ;
I '$D(BGPSEAT) D ^BGP4D1
I $D(BGPSEAT) D ^BGP4D10
U IO
D ^BGP4DP
D ^%ZISC
I BGPEXPT D GS^BGP4UTL
D XIT
Q
;
NODEV ;
S XBRP="",XBRC="NODEV1^BGP4DGPU",XBRX="XIT^BGP4DGPU",XBNS="BGP"
D ^XBDBQUE
Q
;
NODEV1 ;
I '$D(BGPSEAT) D ^BGP4D1
I $D(BGPSEAT) D ^BGP4D10
D ^BGP4DP
D ^%ZISC
I BGPEXPT D GS^BGP4UTL
D XIT
Q
TSKMN ;EP ENTRY POINT FROM TASKMAN
S ZTIO=$S($D(ION):ION,1:IO) I $D(IOST)#2,IOST]"" S ZTIO=ZTIO_";"_IOST
I $G(IO("DOC"))]"" S ZTIO=ZTIO_";"_$G(IO("DOC"))
I $D(IOM)#2,IOM S ZTIO=ZTIO_";"_IOM I $D(IOSL)#2,IOSL S ZTIO=ZTIO_";"_IOSL
K ZTSAVE S ZTSAVE("BGP*")=""
S ZTCPU=$G(IOCPU),ZTRTN="DRIVER^BGP4DGPU",ZTDTH="",ZTDESC="NATIONAL GPRA GPU REPORT 11" D ^%ZTLOAD D XIT Q
Q
;
XIT ;
D ^%ZISC
D EN^XBVK("BGP") I $D(ZTQUEUED) S ZTREQ="@"
K DIRUT,DUOUT,DIR,DOD
K DIADD,DLAYGO
D KILL^AUPNPAT
K X,X1,X2,X3,X4,X5,X6
K A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,V,W,X,Y,Z
K N,N1,N2,N3,N4,N5,N6
K BD,ED
D KILL^AUPNPAT
D ^XBFMK
Q
;
CTR(X,Y) ;EP - Center X in a field Y wide.
Q $J("",$S($D(Y):Y,1:IOM)-$L(X)\2)_X
;----------
EOP ;EP - End of page.
Q:$E(IOST)'="C"
Q:$D(ZTQUEUED)!'(IOT="TRM")!$D(IO("S"))
NEW DIR
K DIR,DIRUT,DFOUT,DLOUT,DTOUT,DUOUT
S DIR(0)="E" D ^DIR KILL DIR
Q
;----------
USR() ;EP - Return name of current user from ^VA(200.
Q $S($G(DUZ):$S($D(^VA(200,DUZ,0)):$P(^(0),U),1:"UNKNOWN"),1:"DUZ UNDEFINED OR 0")
;----------
LOC() ;EP - Return location name from file 4 based on DUZ(2).
Q $S($G(DUZ(2)):$S($D(^DIC(4,DUZ(2),0)):$P(^(0),U),1:"UNKNOWN"),1:"DUZ(2) UNDEFINED OR 0")
;----------
;
CHKY ;
W !!,"The baseline year and the previous year time periods are the same.",!!
S DIR(0)="Y",DIR("A")="Do you want to change the baseline year",DIR("B")="N" KILL DA D ^DIR KILL DIR
I $D(DIRUT) S Y="" Q
Q
F ;calendar year
S (BGPPER,BGPVDT)=""
W !!,"Enter the Calendar Year for the report END date. Use a 4 digit",!,"year, e.g. 2014"
S DIR(0)="D^::EP"
S DIR("A")="Enter Year"
S DIR("?")="This report is compiled for a period. Enter a valid date."
D ^DIR KILL DIR
I $D(DIRUT) Q
I $D(DUOUT) S DIRUT=1 Q
S BGPVDT=Y
I $E(Y,4,7)'="0000" W !!,"Please enter a year only!",! G F
S BGPPER=BGPVDT
Q
ENDDATE ;EP
W !!,"When entering dates, if you do not enter a full 4 digit year (e.g. 2014)"
W !,"will assume a year in the past, if you want to put in a future date,"
W !,"remember to enter the full 4 digit year. For example, if today is"
W !,"January 4, 2010 and you type in 6/30/05 the system will assume the year"
W !,"as 1905 since that is a date in the past. You must type 6/30/2010 if you"
W !,"want a date in the future."
S (BGPPER,BGPVDT)=""
W ! K DIR,X,Y S DIR(0)="D^::EP",DIR("A")="Enter End Date for the Report: (e.g. 11/30/2005)" D ^DIR K DIR S:$D(DUOUT) DIRUT=1
I $D(DIRUT) Q
S (BGPPER,BGPVDT)=Y
Q
BGP4DGPU ; IHS/CMI/LAB - IHS AREA CLIN 05 REPORT DRIVER ;
+1 ;;14.1;IHS CLINICAL REPORTING;;MAY 29, 2014;Build 114
+2 ;
+3 ;
+4 IF $DATA(IOF)
WRITE @IOF
+5 WRITE !,$$CTR("IHS GPRA/GPRAMA Performance Report for a User Selected Date Range",80)
INTRO ;
+1 DO XIT
+2 WRITE !!,"This will produce a National GPRA/GPRAMA report for a year period you specify."
+3 WRITE !!,"You will be asked to provide: 1) the reporting period, 2) the baseline"
+4 WRITE !,"period to compare data to, 3) the Community taxonomy and 4) the patient"
+5 WRITE !,"population (i.e. AI/AN only, non AI/AN, or both) to determine which"
+6 WRITE !,"patients will be included."
+7 WRITE !!,"You can choose to export this data to the Area office. If you"
+8 WRITE !,"answer yes at the export prompt, a report will be produced in export format"
+9 WRITE !,"for the Area Office to use in Area aggregated data. Depending on site specific"
+10 WRITE !,"configuration, the export file will either be automatically transmitted "
+11 WRITE !,"directly to the Area or the site will have to send the file manually.",!
+12 KILL DIR
SET DIR(0)="E"
SET DIR("A")="Press enter to continue"
DO ^DIR
KILL DIR
+13 SET BGPYGPU=1
+14 DO TAXCHK^BGP4XTCN
+15 SET X=$$DEMOCHK^BGP4UTL2()
+16 IF 'X
WRITE !!,"Exiting Report....."
DO PAUSE^BGP4DU
DO XIT
QUIT
+17 DO XIT
ST ;
+1 WRITE !!
+2 SET DIR(0)="Y"
SET DIR("A")="Do you want to run the report on a Patient Panel"
SET DIR("B")="N"
KILL DA
DO ^DIR
KILL DIR
+3 IF $DATA(DIRUT)
DO XIT
QUIT
+4 IF 'Y
GOTO DP
+5 ;get search template name
+6 WRITE !!,"Please enter the search template name. The template will contain a",!,"panel of patients defined by the user.",!
+7 SET DIC("S")="I $P(^(0),U,4)=2!($P(^(0),U,4)=9000001)"
SET DIC="^DIBT("
SET DIC("A")="Enter SEARCH TEMPLATE name: "
SET DIC(0)="AEMQ"
DO ^DIC
KILL DIC,DA,DR,DICR
+8 IF Y=-1
GOTO XIT
+9 SET BGPSEAT=+Y
SET BGPBEN=3
DP ;
+1 KILL DIR
+2 SET BGPDESGP=""
+3 SET DIR(0)="S^E:Entire Facility;P:One Designated Provider"
SET DIR("A")="Run the report for"
SET DIR("B")="E"
KILL DA
DO ^DIR
KILL DIR
+4 IF $DATA(DIRUT)
GOTO ST
+5 IF Y="E"
GOTO TP
+6 WRITE !!
+7 SET DIC("A")="Which Designated Provider: "
SET DIC="^VA(200,"
SET DIC(0)="AEMQ"
DO ^DIC
KILL DIC,DA
+8 IF X="^"
DO XIT
QUIT
+9 IF Y=-1
WRITE !!,"provider is required, use an '^' to exit."
GOTO DP
+10 SET BGPDESGP=+Y
TP ;get time period
+1 SET BGPRTYPE=1
SET BGPYRPTH=""
SET BGPYGPU=1
+2 ;
+3 SET (BGPBD,BGPED,BGPTP)=""
+4 SET DIR(0)="S^1:January 1 - December 31;2:April 1 - March 31;3:July 1 - June 30;4:October 1 - September 30;5:User-Defined Report Period"
SET DIR("A")="Enter the date range for your report"
KILL DA
DO ^DIR
KILL DIR
+5 IF $DATA(DIRUT)
DO XIT
QUIT
+6 SET BGPQTR=Y
+7 IF BGPQTR=5
DO ENDDATE
+8 IF BGPQTR'=5
DO F
+9 IF BGPPER=""
WRITE !,"Year not entered.",!
GOTO TP
+10 IF BGPQTR=1
SET BGPBD=$EXTRACT(BGPPER,1,3)_"0101"
SET BGPED=$EXTRACT(BGPPER,1,3)_"1231"
+11 IF BGPQTR=2
SET BGPBD=($EXTRACT(BGPPER,1,3)-1)_"0401"
SET BGPED=$EXTRACT(BGPPER,1,3)_"0331"
+12 IF BGPQTR=3
SET BGPBD=($EXTRACT(BGPPER,1,3)-1)_"0701"
SET BGPED=$EXTRACT(BGPPER,1,3)_"0630"
+13 IF BGPQTR=4
SET BGPBD=($EXTRACT(BGPPER,1,3)-1)_"1001"
SET BGPED=$EXTRACT(BGPPER,1,3)_"0930"
+14 IF BGPQTR=5
SET BGPBD=$$FMADD^XLFDT(BGPPER,-364)
SET BGPED=BGPPER
SET BGPPER=$EXTRACT(BGPED,1,3)_"0000"
+15 IF BGPED>DT
Begin DoDot:1
+16 WRITE !!,"You have selected Current Report period ",$$FMTE^XLFDT(BGPBD)," through ",$$FMTE^XLFDT(BGPED),"."
+17 WRITE !,"The end date of this report is in the future; your data will not be",!,"complete.",!
+18 KILL DIR
SET BGPDO=0
SET DIR(0)="Y"
SET DIR("A")="Do you want to change your Current Report Dates"
SET DIR("B")="N"
KILL DA
DO ^DIR
KILL DIR
+19 IF $DATA(DIRUT)
SET BGPDO=1
QUIT
+20 IF Y
SET BGPDO=1
QUIT
+21 QUIT
End DoDot:1
IF BGPDO=1
GOTO TP
BY ;get baseline year
+1 SET BGPVDT=""
+2 WRITE !!,"Enter the Baseline Year to compare data to.",!,"Use a 4 digit year, e.g. 1999, 2000"
+3 SET DIR(0)="D^::EP"
+4 SET DIR("A")="Enter Year (e.g. 2000)"
+5 DO ^DIR
KILL DIR
+6 IF $DATA(DIRUT)
GOTO TP
+7 IF $DATA(DUOUT)
SET DIRUT=1
GOTO TP
+8 SET BGPVDT=Y
+9 IF $EXTRACT(Y,4,7)'="0000"
WRITE !!,"Please enter a year only!",!
GOTO BY
+10 SET X=$EXTRACT(BGPPER,1,3)-$EXTRACT(BGPVDT,1,3)
+11 SET X=X_"0000"
+12 SET BGPBBD=BGPBD-X
SET BGPBBD=$EXTRACT(BGPBBD,1,3)_$EXTRACT(BGPBD,4,7)
+13 SET BGPBED=BGPED-X
SET BGPBED=$EXTRACT(BGPBED,1,3)_$EXTRACT(BGPED,4,7)
+14 SET BGPPBD=($EXTRACT(BGPBD,1,3)-1)_$EXTRACT(BGPBD,4,7)
+15 SET BGPPED=($EXTRACT(BGPED,1,3)-1)_$EXTRACT(BGPED,4,7)
+16 WRITE !!,"The date ranges for this report are:"
+17 WRITE !?5,"Report Period: ",?31,$$FMTE^XLFDT(BGPBD)," to ",?31,$$FMTE^XLFDT(BGPED)
+18 WRITE !?5,"Previous Year Period: ",?31,$$FMTE^XLFDT(BGPPBD)," to ",?31,$$FMTE^XLFDT(BGPPED)
+19 WRITE !?5,"Baseline Period: ",?31,$$FMTE^XLFDT(BGPBBD)," to ",?31,$$FMTE^XLFDT(BGPBED)
+20 IF BGPPBD=BGPBBD
IF BGPPED=BGPBED
KILL Y
DO CHKY
IF Y
KILL BGPBBD,BGPBED,BGPPBD,BGPPED
GOTO BY
COMM ;
+1 IF $GET(BGPSEAT)
GOTO MFIC
+2 WRITE !!,"Specify the community taxonomy to determine which patients will be",!,"included in the report. You should have created this taxonomy using QMAN.",!
+3 KILL BGPTAX
+4 SET BGPTAXI=""
+5 DO ^XBFMK
+6 SET DIC("S")="I $P(^(0),U,15)=9999999.05"
SET DIC="^ATXAX("
SET DIC(0)="AEMQ"
SET DIC("A")="Enter the Name of the Community Taxonomy: "
+7 SET B=$PIECE($GET(^BGPSITE(DUZ(2),0)),U,5)
IF B
SET DIC("B")=$PIECE(^ATXAX(B,0),U)
+8 DO ^DIC
+9 IF Y=-1
QUIT
+10 SET BGPTAXI=+Y
COM1 SET X=0
+1 FOR
SET X=$ORDER(^ATXAX(BGPTAXI,21,X))
IF 'X
QUIT
Begin DoDot:1
+2 SET BGPTAX($PIECE(^ATXAX(BGPTAXI,21,X,0),U))=""
+3 QUIT
End DoDot:1
+4 IF '$DATA(BGPTAX)
WRITE !!,"There are no communities in that taxonomy."
GOTO COMM
+5 SET X=0
SET G=0
+6 FOR
SET X=$ORDER(^ATXAX(BGPTAXI,21,X))
IF 'X
QUIT
Begin DoDot:1
+7 SET C=$PIECE(^ATXAX(BGPTAXI,21,X,0),U)
+8 IF '$DATA(^AUTTCOM("B",C))
WRITE !!,"*** Warning: Community ",C," is in the taxonomy but does not",!,"exist in the community table. Please recreate your community taxonomy."
SET G=1
+9 QUIT
End DoDot:1
+10 IF G
WRITE !!,"The community taxonomy may not be accurate."
Begin DoDot:1
+11 SET BGPQUIT=0
+12 SET DIR(0)="Y"
SET DIR("A")="Do you wish to continue running the report"
KILL DA
DO ^DIR
KILL DIR
+13 IF $DATA(DIRUT)
SET BGPQUIT=1
+14 IF 'Y
SET BGPQUIT=1
+15 QUIT
End DoDot:1
IF BGPQUIT
DO XIT
QUIT
MFIC KILL BGPQUIT
+1 IF $PIECE($GET(^BGPSITE(DUZ(2),0)),U,8)=1
Begin DoDot:1
+2 SET BGPMFITI=""
+3 WRITE !!,"Specify the LOCATION taxonomy to determine which patient visits will be"
+4 WRITE !,"used to determine whether a patient is in the denominators for the report."
+5 WRITE !,"You should have created this taxonomy using QMAN.",!
+6 KILL BGPMFIT
+7 SET BGPMFITI=""
+8 DO ^XBFMK
+9 SET DIC("S")="I $P(^(0),U,15)=9999999.06"
SET DIC="^ATXAX("
SET DIC(0)="AEMQ"
SET DIC("A")="Enter the Name of the Location/Facility Taxonomy: "
+10 SET B=$PIECE($GET(^BGPSITE(DUZ(2),0)),U,9)
IF B
SET DIC("B")=$PIECE(^ATXAX(B,0),U)
+11 DO ^DIC
+12 IF Y=-1
QUIT
+13 SET BGPMFITI=+Y
End DoDot:1
IF BGPMFITI=""
GOTO COMM
BEN ;
+1 SET X=0
FOR
SET X=$ORDER(^BGPINDJ("GPRA",1,X))
IF X'=+X
QUIT
SET BGPIND(X)=""
+2 SET BGPINDJ="G"
+3 IF $GET(BGPSEAT)
GOTO HOME
+4 SET BGPBEN=""
+5 SET DIR(0)="S^1:Indian/Alaskan Native (Classification 01);2:Not Indian Alaskan/Native (Not Classification 01);3:All (both Indian/Alaskan Natives and Non 01)"
+6 SET DIR("A")="Select Beneficiary Population to include in this report"
+7 SET DIR("B")="1"
KILL DA
DO ^DIR
KILL DIR
+8 IF $DATA(DIRUT)
GOTO COMM
+9 SET BGPBEN=Y
SET BGPBENF=Y(0)
HOME ;
+1 SET BGPHOME=$PIECE($GET(^BGPSITE(DUZ(2),0)),U,2)
+2 IF BGPHOME=""
WRITE !!,"Home Location not found in Site File!!",!,"PHN Visits counts to Home will be calculated using clinic 11 only!!"
HANG 2
GOTO AI
+3 WRITE !,"Your HOME location is defined as: ",$PIECE(^DIC(4,BGPHOME,0),U)," asufac: ",$PIECE(^AUTTLOC(BGPHOME,0),U,10)
AI ;gather all gpra measures
+1 SET X=0
FOR
SET X=$ORDER(^BGPINDJ("GPRA",1,X))
IF X'=+X
QUIT
SET BGPIND(X)=""
+2 SET BGPINDJ="G"
EXPORT ;export to area or not?
+1 SET BGPEXPT=""
+2 IF $GET(BGPDESGP)
GOTO EISSEX
+3 IF $DATA(BGPSEAT)
GOTO EISSEX
+4 WRITE !
SET DIR(0)="Y"
SET DIR("A")="Do you wish to export this data to Area"
KILL DA
DO ^DIR
KILL DIR
+5 IF $DATA(DIRUT)
GOTO BEN
+6 SET BGPEXPT=Y
EISSEX ;
+1 SET BGPEXCEL=""
+2 SET BGPUF=$$GETDIR^BGP4UTL2()
+3 ;I ^%ZOSF("OS")["PC"!(^%ZOSF("OS")["NT")!($P($G(^AUTTSITE(1,0)),U,21)=2) S BGPUF=$S($P($G(^AUTTSITE(1,1)),U,2)]"":$P(^AUTTSITE(1,1),U,2),1:"C:\EXPORT")
+4 ;I $P(^AUTTSITE(1,0),U,21)=1 S BGPUF="/usr/spool/uucppublic/"
+5 IF BGPEXPT
IF BGPUF=""
IF '$DATA(ZTQUEUED)
WRITE !!,"Cannot continue.....can't find export directory name. EXCEL file",!,"not written."
DO PAUSE^BGP4DU
DO XIT
QUIT
SUM ;display summary of this report
+1 IF $DATA(IOF)
WRITE @IOF
+2 WRITE !,$$CTR("SUMMARY OF IHS GPRA/GPRAMA PERFORMANCE REPORT TO BE GENERATED")
+3 WRITE !,$$CTR($$RPTVER^BGP4BAN,80)
+4 WRITE !!,"The date ranges for this report are:"
+5 WRITE !?5,"Report Period: ",?31,$$FMTE^XLFDT(BGPBD)," to ",?31,$$FMTE^XLFDT(BGPED)
+6 WRITE !?5,"Previous Year Period: ",?31,$$FMTE^XLFDT(BGPPBD)," to ",?31,$$FMTE^XLFDT(BGPPED)
+7 WRITE !?5,"Baseline Period: ",?31,$$FMTE^XLFDT(BGPBBD)," to ",?31,$$FMTE^XLFDT(BGPBED)
+8 IF '$GET(BGPSEAT)
WRITE !!,"The COMMUNITY Taxonomy to be used is: ",$PIECE(^ATXAX(BGPTAXI,0),U)
+9 IF '$GET(BGPSEAT)
WRITE !,"The Beneficiary Population is: ",BGPBENF
+10 IF $GET(BGPSEAT)
WRITE !!,"The Patient Population is: ",$PIECE(^DIBT(BGPSEAT,0),U,1)
+11 IF BGPHOME
WRITE !,"The HOME location is: ",$PIECE(^DIC(4,BGPHOME,0),U)," ",$PIECE(^AUTTLOC(BGPHOME,0),U,10)
+12 IF 'BGPHOME
WRITE !,"No HOME Location selected."
+13 DO TEXT^BGP4DSL
+14 IF $DATA(DIRUT)
GOTO BEN
+15 DO PT^BGP4DSL
+16 IF BGPROT=""
GOTO BEN
ZIS ;call to XBDBQUE
+1 DO REPORT^BGP4UTL
+2 IF $GET(BGPQUIT)
DO XIT
QUIT
+3 IF BGPRPT=""
DO XIT
QUIT
+4 IF BGPEXPT
Begin DoDot:1
+5 WRITE !!,"A file will be created called BG141",$PIECE(^AUTTLOC(DUZ(2),0),U,10)_"."_BGPRPT," and will reside",!,"in the ",BGPUF," directory.",!
+6 WRITE !,"Depending on your site configuration, this file may need to be manually",!,"sent to your Area Office.",!
End DoDot:1
+7 IF BGPEXCEL
IF BGPEXPT
Begin DoDot:1
+8 WRITE !,"A file will be created called ",BGPFN,!,"and will reside in the ",BGPUF," directory. This file can be used in Excel.",!
End DoDot:1
+9 KILL IOP,%ZIS
IF BGPROT="D"
IF BGPDELT="F"
DO NODEV
DO XIT
QUIT
+10 KILL IOP,%ZIS
WRITE !!
SET %ZIS=$SELECT(BGPDELT'="S":"PQM",1:"PM")
DO ^%ZIS
+11 IF POP
WRITE !,"Report Aborted"
SET DA=BGPRPT
SET DIK="^BGPGPDCJ("
DO ^DIK
KILL DIK
DO XIT
QUIT
+12 IF POP
WRITE !,"Report Aborted"
SET DA=BGPRPT
SET DIK="^BGPGPDPJ("
DO ^DIK
KILL DIK
DO XIT
QUIT
+13 IF POP
WRITE !,"Report Aborted"
SET DA=BGPRPT
SET DIK="^BGPGPDBJ("
DO ^DIK
KILL DIK
DO XIT
QUIT
+14 IF $DATA(IO("Q"))
GOTO TSKMN
DRIVER ;
+1 IF '$DATA(BGPSEAT)
DO ^BGP4D1
+2 IF $DATA(BGPSEAT)
DO ^BGP4D10
+3 USE IO
+4 DO ^BGP4DP
+5 DO ^%ZISC
+6 IF BGPEXPT
DO GS^BGP4UTL
+7 DO XIT
+8 QUIT
+9 ;
NODEV ;
+1 SET XBRP=""
SET XBRC="NODEV1^BGP4DGPU"
SET XBRX="XIT^BGP4DGPU"
SET XBNS="BGP"
+2 DO ^XBDBQUE
+3 QUIT
+4 ;
NODEV1 ;
+1 IF '$DATA(BGPSEAT)
DO ^BGP4D1
+2 IF $DATA(BGPSEAT)
DO ^BGP4D10
+3 DO ^BGP4DP
+4 DO ^%ZISC
+5 IF BGPEXPT
DO GS^BGP4UTL
+6 DO XIT
+7 QUIT
TSKMN ;EP ENTRY POINT FROM TASKMAN
+1 SET ZTIO=$SELECT($DATA(ION):ION,1:IO)
IF $DATA(IOST)#2
IF IOST]""
SET ZTIO=ZTIO_";"_IOST
+2 IF $GET(IO("DOC"))]""
SET ZTIO=ZTIO_";"_$GET(IO("DOC"))
+3 IF $DATA(IOM)#2
IF IOM
SET ZTIO=ZTIO_";"_IOM
IF $DATA(IOSL)#2
IF IOSL
SET ZTIO=ZTIO_";"_IOSL
+4 KILL ZTSAVE
SET ZTSAVE("BGP*")=""
+5 SET ZTCPU=$GET(IOCPU)
SET ZTRTN="DRIVER^BGP4DGPU"
SET ZTDTH=""
SET ZTDESC="NATIONAL GPRA GPU REPORT 11"
DO ^%ZTLOAD
DO XIT
QUIT
+6 QUIT
+7 ;
XIT ;
+1 DO ^%ZISC
+2 DO EN^XBVK("BGP")
IF $DATA(ZTQUEUED)
SET ZTREQ="@"
+3 KILL DIRUT,DUOUT,DIR,DOD
+4 KILL DIADD,DLAYGO
+5 DO KILL^AUPNPAT
+6 KILL X,X1,X2,X3,X4,X5,X6
+7 KILL A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,V,W,X,Y,Z
+8 KILL N,N1,N2,N3,N4,N5,N6
+9 KILL BD,ED
+10 DO KILL^AUPNPAT
+11 DO ^XBFMK
+12 QUIT
+13 ;
CTR(X,Y) ;EP - Center X in a field Y wide.
+1 QUIT $JUSTIFY("",$SELECT($DATA(Y):Y,1:IOM)-$LENGTH(X)\2)_X
+2 ;----------
EOP ;EP - End of page.
+1 IF $EXTRACT(IOST)'="C"
QUIT
+2 IF $DATA(ZTQUEUED)!'(IOT="TRM")!$DATA(IO("S"))
QUIT
+3 NEW DIR
+4 KILL DIR,DIRUT,DFOUT,DLOUT,DTOUT,DUOUT
+5 SET DIR(0)="E"
DO ^DIR
KILL DIR
+6 QUIT
+7 ;----------
USR() ;EP - Return name of current user from ^VA(200.
+1 QUIT $SELECT($GET(DUZ):$SELECT($DATA(^VA(200,DUZ,0)):$PIECE(^(0),U),1:"UNKNOWN"),1:"DUZ UNDEFINED OR 0")
+2 ;----------
LOC() ;EP - Return location name from file 4 based on DUZ(2).
+1 QUIT $SELECT($GET(DUZ(2)):$SELECT($DATA(^DIC(4,DUZ(2),0)):$PIECE(^(0),U),1:"UNKNOWN"),1:"DUZ(2) UNDEFINED OR 0")
+2 ;----------
+3 ;
CHKY ;
+1 WRITE !!,"The baseline year and the previous year time periods are the same.",!!
+2 SET DIR(0)="Y"
SET DIR("A")="Do you want to change the baseline year"
SET DIR("B")="N"
KILL DA
DO ^DIR
KILL DIR
+3 IF $DATA(DIRUT)
SET Y=""
QUIT
+4 QUIT
F ;calendar year
+1 SET (BGPPER,BGPVDT)=""
+2 WRITE !!,"Enter the Calendar Year for the report END date. Use a 4 digit",!,"year, e.g. 2014"
+3 SET DIR(0)="D^::EP"
+4 SET DIR("A")="Enter Year"
+5 SET DIR("?")="This report is compiled for a period. Enter a valid date."
+6 DO ^DIR
KILL DIR
+7 IF $DATA(DIRUT)
QUIT
+8 IF $DATA(DUOUT)
SET DIRUT=1
QUIT
+9 SET BGPVDT=Y
+10 IF $EXTRACT(Y,4,7)'="0000"
WRITE !!,"Please enter a year only!",!
GOTO F
+11 SET BGPPER=BGPVDT
+12 QUIT
ENDDATE ;EP
+1 WRITE !!,"When entering dates, if you do not enter a full 4 digit year (e.g. 2014)"
+2 WRITE !,"will assume a year in the past, if you want to put in a future date,"
+3 WRITE !,"remember to enter the full 4 digit year. For example, if today is"
+4 WRITE !,"January 4, 2010 and you type in 6/30/05 the system will assume the year"
+5 WRITE !,"as 1905 since that is a date in the past. You must type 6/30/2010 if you"
+6 WRITE !,"want a date in the future."
+7 SET (BGPPER,BGPVDT)=""
+8 WRITE !
KILL DIR,X,Y
SET DIR(0)="D^::EP"
SET DIR("A")="Enter End Date for the Report: (e.g. 11/30/2005)"
DO ^DIR
KILL DIR
IF $DATA(DUOUT)
SET DIRUT=1
+9 IF $DATA(DIRUT)
QUIT
+10 SET (BGPPER,BGPVDT)=Y
+11 QUIT
