HLUCM ;CIOFO-O/LJA - HL7/Capacity Mgt API ;09/13/04 14:01
;;1.6;HEALTH LEVEL SEVEN;**79,88,103,114**;Oct 13, 1995
;
QUIT
;
CM(START,END,PNMSP,IEN101,TOTALS,COND,ERRINFO) ; Capacity management totals
N NMSPTYPE,PROTYPE,RESULTS,SITENM
I '$D(HLAPI) N HLAPI S HLAPI="CM"
QUIT:'$$PREPARE^HLUCM001 "" ;->
D KILLS^HLUCM009("START")
S RESULTS=$P($$LOOP,U,1,3)
D XTMP
D KILLS^HLUCM009("END")
KILL HLAPI
Q RESULTS
;
CMF(START,END,PNMSP,IEN101,TOTALS,COND,ERRINFO) ; Collect Remote Facility data - SYNC
N HLAPI
S HLAPI="CMF"
Q $$CM(START,END,.PNMSP,.IEN101,TOTALS,COND,.ERRINFO)
;
CM2(START,END,PNMSP,IEN101,TOTALS,COND,ERRINFO) ; Capacity management totals
N NMSPTYPE,PROTYPE,RESULTS,SITENM
I '$D(HLAPI) N HLAPI S HLAPI="CM2"
QUIT:'$$PREPARE^HLUCM001 "" ;->
D KILLS^HLUCM009("START")
S RESULTS=$P($$LOOP,U,1,3) ; Counts are aggregate
D XTMP
D KILLS^HLUCM009("END")
KILL HLAPI
QUIT RESULTS
;
CM2F(START,END,PNMSP,IEN101,TOTALS,COND,ERRINFO) ; Collect Remote Facility data - SYNC
N HLAPI
S HLAPI="CM2F"
Q $$CM2(START,END,.PNMSP,.IEN101,TOTALS,COND,.ERRINFO)
;
LOOP() ; Loop thru 772's .01... (Called from LOOP^HLUCM)
N ANS,API,CHAR,COUNTED,CTDBG,CTPCKG,D0,DATA,DEF,ERR,FAC,FAIL,HL,HLASTNM
N HLUCMADD,IEN772,IEN773,LEN,LOOP772,LOOPDT,NMSP,NUM,OK
N ORIGETM,ORIGSTM,PCKG,PROT,PROTOCOL,QUES,SEC
N SP,SUB,SVNO,TIMEP,TM772,TOT,V1,V2,VAL,VALUE,X,Y
;
D LOAD
D ADJTIME^HLUCM003
D CMDBD
D TOTALCM ; Already stored in X (no counted) or C (counted) subscripts...
S RESULTS=$G(^TMP(TOTALS,$J))
;
QUIT RESULTS
;
CMDBD ; Create $$CM debug data...
; HLAPI,START,END -- req
N DATA,IENPAR,IEN772,OKPP,S1,S2,S3,SUB,TOT,VALNMSP,VALPROT
;
S API=$S($G(API)["CM2":1,1:0) ; Async=1, Sync=0
;
S IENPAR=0
F S IENPAR=$O(^TMP($J,"HLPARENT",IENPAR)) Q:'IENPAR D
. S DATA=$G(^TMP($J,"HLPARENT",+IENPAR)) QUIT:DATA']"" ;->
. S VALPROT=$P(DATA,U,7),VALNMSP=$P(DATA,U,9)
. F S1="C","X" F S2="C","X" F S3="C","X" S TOT(S1_S2_S3)=0
. S ^TMP($J,"HLUCMSTORE","U",+IENPAR)=DATA
. S IEN772=0
. F S IEN772=$O(^TMP($J,"HLPARENT",+IENPAR,IEN772)) Q:'IEN772 D
. . S ^TMP($J,"HLUCMSTORE","X",+IEN772)=+IENPAR
. . S (OKPP,OKPP(1))=$$PP(+IEN772)
. . S OKPP=$S(OKPP=U:"X",1:"C")
. . S OK=$$COLLSYNC(+IEN772,START,END) ; Outside time range?
. . S SUB=$S(OK:"C",1:"X")
. . S DATA=$P($G(^TMP($J,"HLCHILD",+IEN772)),"~",2,999) Q:DATA']"" ;->
. . ; If # seconds exceeds 1799...
. . S SUB=SUB_$S($P(DATA,U,3)>1799:"X",1:"C")_OKPP
. . S:$P(DATA,U,7)']"" $P(DATA,U,7)=VALPROT
. . S:$P(DATA,U,9)']"" $P(DATA,U,9)=VALNMSP
. . S ^TMP($J,"HLUCMSTORE","U",+IENPAR,+IEN772,SUB)=DATA
. . F I=1:1:3 S $P(TOT(SUB),U,I)=$P(TOT(SUB),U,I)+$P(DATA,U,I)
. . S DATA=$G(^TMP($J,"HLPARENT",+IENPAR,+IEN772))
. . S X=OKPP(1),$P(DATA,U,5)=$P(X,U),$P(DATA,U,6)=$P(X,U,2)
. . S ^TMP($J,"HLUCMSTORE","U",+IENPAR,+IEN772,SUB,772)=DATA
.
. ; Position #1 C=Count (Message BEGIN is not before START)
. ; X=Outside (Msg BEGIN is before START)
. ; #2 C=Count (#Seconds<1800)
. ; X=Greater (#Seconds>1799)
. ; #3 C=Count (Protocol/Namespace match)
. ; X=Mismatch (Protocol/Namespace mismatch)
. F S1="C","X" F S2="C","X" F S3="C","X" S SUB=S1_S2_S3 D
. . QUIT:$TR(TOT(SUB),"0^","")']"" ;->
. . S ^TMP($J,"HLUCMSTORE","U",+IENPAR,SUB)=TOT(SUB)
. .
. . S TOT=$G(^TMP($J,"HLUCMSTORE","T",SUB))
. . D UPTOT
. . S ^TMP($J,"HLUCMSTORE","T",SUB)=TOT
. .
. . S ^TMP($J,"HLUCMSTORE","T",SUB,IENPAR)=TOT(SUB)
. .
. . S TOT=$G(^TMP($J,"HLUCMSTORE","T"))
. . D UPTOT
. . S ^TMP($J,"HLUCMSTORE","T")=TOT
;
KILL ^TMP($J,"HLCHILD"),^TMP($J,"HLPARENT")
;
Q
;
UPTOT ; Up the totals...
; TOT,TOT(SUB) -- req
S $P(TOT,U)=$P(TOT,U)+$P(TOT(SUB),U)
S $P(TOT,U,2)=$P(TOT,U,2)+$P(TOT(SUB),U,2)
S $P(TOT,U,3)=$P(TOT,U,3)+$P(TOT(SUB),U,3)
Q
;
PP(IEN772) ; Get store value for NMSP and PROT...
N PCKG,PP,PROT,X
S PP=$$PROTNMSP^HLUCM002(+IEN772)
I $P(PP,U)']""!($P(PP,U,2)']"") QUIT U ;->
S X=$P(PP,U),PROT=$S(X]"":X,1:"ZZZ")
S X=$P(PP,U,2),PCKG=$S(X]"":X,1:"ZZZ")
Q PROT_U_PCKG
;
LOAD ; Load data (Called by $$CM, $$CM2, and all other APIs)
; START,END -- req
N IEN772,LOOPDT,X
S LOOPDT=START-.000001
F S LOOPDT=$O(^HL(772,"B",LOOPDT)) Q:LOOPDT'>0!(LOOPDT>END) D
. S IEN772=0
. F S IEN772=$O(^HL(772,"B",LOOPDT,IEN772)) Q:IEN772'>0 D
. . QUIT:'$$OK772(+IEN772) ;->
. . S X=$$LOAD772S^HLUCM009(IEN772)
Q
;
TOTALCM ; Loop, total for $$CM...
; HLAPI -- req
N IEN772,IENPAR
S IENPAR=0
F S IENPAR=$O(^TMP($J,"HLUCMSTORE","U",IENPAR)) Q:'IENPAR D
. ; Don't count anything unless the entire unit is OK...
. QUIT:$O(^TMP($J,"HLUCMSTORE","U",+IENPAR,"CCC"))]"" ;->
. S IEN772=0,HLUCMADD=""
. F S IEN772=$O(^TMP($J,"HLUCMSTORE","U",IENPAR,IEN772)) Q:'IEN772 D
. . ;QUIT:'$D(^TMP($J,"HLUCMSTORE","U",+IENPAR,+IEN772,"CCC")) ;->
. . D COLLECT(+IENPAR,+IEN772)
. . I HLAPI["CM2" S HLUCMADD="DON'T ADD. COLLECT3~HLUCM003"
Q
;
COLLSYNC(IEN772,START,END) ; Does entry fall in START/END range?
N DATA,X
S DATA=$G(^TMP($J,"HLCHILD",+IEN772)) QUIT:DATA']"" "" ;->
S X=$P($P(DATA,"~",2,999),U,4) Q:X'?7N.E!(X<START)!(X>END) "" ;->
Q 1
;
OK772(IEN772) ; Valid entry?
N D
S D=$G(^HL(772,+IEN772,0))
QUIT:$P(D,U)'?7N.E "" ;->
I $P(D,U,2)']"",$P(D,U,3)']"",$P(D,U,4)']"",$P(D,U,5)']"" QUIT ""
Q 1
;
COLLECT(PAR,IEN772) ; Collect 772 data and associated 773 data...
N CT,CTPCKG,DATA,DBGBL,IEN773,PP,TOT772,TOT772T,TYPEHR,TYPEIO,TYPELR
;
; ^("U",PARENT-IEN,CHILD-IEN,"CCC")
S DATA=$G(^TMP($J,"HLUCMSTORE","U",+PAR,+IEN772,"CCC"))
S DATA("CHAR")=$P(DATA,U),DATA("DIFF")=$P(DATA,U,3)
S DATA("START")=$P(DATA,U,4),DATA("END")=$P(DATA,U,5)
S DATA("FAC")=$P(DATA,U,11)
;
; ^("U",PARENT-IEN,CHILD-IEN,"CCC",772)
S DATA=$G(^TMP($J,"HLUCMSTORE","U",+PAR,+IEN772,"CCC",772))
S DATA("HR")=$P(DATA,U),DATA("IO")=$P(DATA,U,2),DATA("LR")=$P(DATA,U,3)
S (DATA("PROT"),PROT)=$P(DATA,U,5)
S (DATA("PCKG"),PCKG)=$P(DATA,U,6)
;
S DBGBL=1
;
; Store DATA() info in ^TMP(TOTALS,$J,...)
D ADDTMP^HLUCM001
;
QUIT
;
TOT772C(IEN772) ; Total number of characters in message...
N LEN,LNO,TXT
;
; Use field if present. (Not present about 25% of time)
S LEN=$P($G(^HL(772,IEN772,"S")),U)
I LEN D QUIT ;->
. S DATA("CHAR",772)=$G(DATA("CHAR",772))+LEN
. S DATA("CHAR")=$G(DATA("CHAR"))+LEN
;
; Total manually...
S LNO=0
F S LNO=$O(^HL(772,IEN772,"IN",LNO)) Q:LNO'>0 D
. S TXT=$G(^HL(772,IEN772,"IN",+LNO,0)) QUIT:TXT']"" ;->
. S DATA("CHAR",772)=$G(DATA("CHAR",772))+$L(TXT)
. S DATA("CHAR")=$G(DATA("CHAR"))+$L(TXT)
;
QUIT
;
TOT772T(IEN772) ; Processing time...
; No totals here. Just set times in DATA() array for later use...
N TIME
;
; Time of entry...
S TIME=+$G(^HL(772,+IEN772,0))
I TIME?7N.E S DATA("TIME",TIME,772,.01)=""
;
; Time processed...
S TIME=$P($G(^HL(772,+IEN772,"P")),U,2)
I TIME?7N.E S DATA("TIME",TIME,772,21)=""
;
QUIT
;
TOT773C(IEN773) ; Total number of characters...
; DATA() -- passed in (See COLLECT)
N CHAR
S CHAR=$$MSGSIZE(+IEN773) QUIT:CHAR'>0 ;->
S DATA("CHAR",773,IEN773)=CHAR
S DATA("CHAR")=$G(DATA("CHAR"))+CHAR
S TOT773(IEN773)=CHAR
QUIT
;
MSGSIZE(IEN773) ; Number characters in 773 entry...
N NCH,NO
S NCH=0,NO=0
F S NO=$O(^HLMA(+IEN773,"MSH",NO)) Q:NO'>0 D
. S NCH=NCH+$L($G(^HLMA(+IEN773,"MSH",+NO,0)))
QUIT NCH
;
TOT773T(IEN773) ; Set TIMEs...
; DATA() -- passed in (See COLLECT)
N TIME
;
; Creation time already taken from 772...
;
; Processed time...
S TIME=+$G(^HLMA(+IEN773,"S")) QUIT:TIME'>0 ;->
S DATA("TIME",TIME,773,100)=""
;
QUIT
;
ERR(REA) ; Record error...
S NOERR=NOERR+1
S REA=$S($G(REA)]"":REA,1:"?")
S ERRINFO(REA)=""
QUIT
;
SEC(FMDT) ;
S FMDT=$$FMTH^XLFDT(FMDT)
QUIT $$SEC^XLFDT(FMDT)
;
TMDIFF ; DATA("TIME",...) -- req --> DATA("DIFF")
S (DATA("DIFF"),DATA("END"),DATA("START"))="" ; Default... HL*1.6*114
S DATA("START")=$O(DATA("TIME",0)) QUIT:DATA("START")'>0 ;->
S DATA("END")=$O(DATA("TIME",":"),-1)
S DATA("DIFF")=$$SEC(DATA("END"))-$$SEC(DATA("START"))
QUIT
;
XTMP ; Store in ^XTMP...
; API Parameters -- req
N XTMP
;
QUIT:PNMSP'=1!(IEN101'=1) ;-> Must be ALL,ALL
;
S XTMP="HLUCM "_$$DT^XLFDT
S:'$D(^XTMP(XTMP,0)) ^XTMP(XTMP,0)=$$FMADD^XLFDT($$DT^XLFDT,7)_U_$$NOW^XLFDT_U_"HLUCM Data"
;
S SVNO=$G(^XTMP(XTMP,"P",+START,+END,COND))
I SVNO'>0 S SVNO=$O(^XTMP(XTMP,"N",":"),-1)+1
S ^XTMP(XTMP,"P",+START,+END,COND)=SVNO_U_$$NOW^XLFDT
S ^XTMP(XTMP,"N",+SVNO)=START_U_END_U_COND_U_HLAPI
KILL ^XTMP(XTMP,"D",+SVNO)
;
MERGE ^XTMP(XTMP,"D",+SVNO)=^TMP(TOTALS,$J)
;
Q
;
EOR ; HLUCM - HL7/Capacity Mgt API ;2/27/01 10:15
HLUCM ;CIOFO-O/LJA - HL7/Capacity Mgt API ;09/13/04 14:01
+1 ;;1.6;HEALTH LEVEL SEVEN;**79,88,103,114**;Oct 13, 1995
+2 ;
+3 QUIT
+4 ;
CM(START,END,PNMSP,IEN101,TOTALS,COND,ERRINFO) ; Capacity management totals
+1 NEW NMSPTYPE,PROTYPE,RESULTS,SITENM
+2 IF '$DATA(HLAPI)
NEW HLAPI
SET HLAPI="CM"
+3 ;->
IF '$$PREPARE^HLUCM001
QUIT ""
+4 DO KILLS^HLUCM009("START")
+5 SET RESULTS=$PIECE($$LOOP,U,1,3)
+6 DO XTMP
+7 DO KILLS^HLUCM009("END")
+8 KILL HLAPI
+9 QUIT RESULTS
+10 ;
CMF(START,END,PNMSP,IEN101,TOTALS,COND,ERRINFO) ; Collect Remote Facility data - SYNC
+1 NEW HLAPI
+2 SET HLAPI="CMF"
+3 QUIT $$CM(START,END,.PNMSP,.IEN101,TOTALS,COND,.ERRINFO)
+4 ;
CM2(START,END,PNMSP,IEN101,TOTALS,COND,ERRINFO) ; Capacity management totals
+1 NEW NMSPTYPE,PROTYPE,RESULTS,SITENM
+2 IF '$DATA(HLAPI)
NEW HLAPI
SET HLAPI="CM2"
+3 ;->
IF '$$PREPARE^HLUCM001
QUIT ""
+4 DO KILLS^HLUCM009("START")
+5 ; Counts are aggregate
SET RESULTS=$PIECE($$LOOP,U,1,3)
+6 DO XTMP
+7 DO KILLS^HLUCM009("END")
+8 KILL HLAPI
+9 QUIT RESULTS
+10 ;
CM2F(START,END,PNMSP,IEN101,TOTALS,COND,ERRINFO) ; Collect Remote Facility data - SYNC
+1 NEW HLAPI
+2 SET HLAPI="CM2F"
+3 QUIT $$CM2(START,END,.PNMSP,.IEN101,TOTALS,COND,.ERRINFO)
+4 ;
LOOP() ; Loop thru 772's .01... (Called from LOOP^HLUCM)
+1 NEW ANS,API,CHAR,COUNTED,CTDBG,CTPCKG,D0,DATA,DEF,ERR,FAC,FAIL,HL,HLASTNM
+2 NEW HLUCMADD,IEN772,IEN773,LEN,LOOP772,LOOPDT,NMSP,NUM,OK
+3 NEW ORIGETM,ORIGSTM,PCKG,PROT,PROTOCOL,QUES,SEC
+4 NEW SP,SUB,SVNO,TIMEP,TM772,TOT,V1,V2,VAL,VALUE,X,Y
+5 ;
+6 DO LOAD
+7 DO ADJTIME^HLUCM003
+8 DO CMDBD
+9 ; Already stored in X (no counted) or C (counted) subscripts...
DO TOTALCM
+10 SET RESULTS=$GET(^TMP(TOTALS,$JOB))
+11 ;
+12 QUIT RESULTS
+13 ;
CMDBD ; Create $$CM debug data...
+1 ; HLAPI,START,END -- req
+2 NEW DATA,IENPAR,IEN772,OKPP,S1,S2,S3,SUB,TOT,VALNMSP,VALPROT
+3 ;
+4 ; Async=1, Sync=0
SET API=$SELECT($GET(API)["CM2":1,1:0)
+5 ;
+6 SET IENPAR=0
+7 FOR
SET IENPAR=$ORDER(^TMP($JOB,"HLPARENT",IENPAR))
IF 'IENPAR
QUIT
Begin DoDot:1
+8 ;->
SET DATA=$GET(^TMP($JOB,"HLPARENT",+IENPAR))
IF DATA']""
QUIT
+9 SET VALPROT=$PIECE(DATA,U,7)
SET VALNMSP=$PIECE(DATA,U,9)
+10 FOR S1="C","X"
FOR S2="C","X"
FOR S3="C","X"
SET TOT(S1_S2_S3)=0
+11 SET ^TMP($JOB,"HLUCMSTORE","U",+IENPAR)=DATA
+12 SET IEN772=0
+13 FOR
SET IEN772=$ORDER(^TMP($JOB,"HLPARENT",+IENPAR,IEN772))
IF 'IEN772
QUIT
Begin DoDot:2
+14 SET ^TMP($JOB,"HLUCMSTORE","X",+IEN772)=+IENPAR
+15 SET (OKPP,OKPP(1))=$$PP(+IEN772)
+16 SET OKPP=$SELECT(OKPP=U:"X",1:"C")
+17 ; Outside time range?
SET OK=$$COLLSYNC(+IEN772,START,END)
+18 SET SUB=$SELECT(OK:"C",1:"X")
+19 ;->
SET DATA=$PIECE($GET(^TMP($JOB,"HLCHILD",+IEN772)),"~",2,999)
IF DATA']""
QUIT
+20 ; If # seconds exceeds 1799...
+21 SET SUB=SUB_$SELECT($PIECE(DATA,U,3)>1799:"X",1:"C")_OKPP
+22 IF $PIECE(DATA,U,7)']""
SET $PIECE(DATA,U,7)=VALPROT
+23 IF $PIECE(DATA,U,9)']""
SET $PIECE(DATA,U,9)=VALNMSP
+24 SET ^TMP($JOB,"HLUCMSTORE","U",+IENPAR,+IEN772,SUB)=DATA
+25 FOR I=1:1:3
SET $PIECE(TOT(SUB),U,I)=$PIECE(TOT(SUB),U,I)+$PIECE(DATA,U,I)
+26 SET DATA=$GET(^TMP($JOB,"HLPARENT",+IENPAR,+IEN772))
+27 SET X=OKPP(1)
SET $PIECE(DATA,U,5)=$PIECE(X,U)
SET $PIECE(DATA,U,6)=$PIECE(X,U,2)
+28 SET ^TMP($JOB,"HLUCMSTORE","U",+IENPAR,+IEN772,SUB,772)=DATA
End DoDot:2
+29 +30 ; Position #1 C=Count (Message BEGIN is not before START)
+31 ; X=Outside (Msg BEGIN is before START)
+32 ; #2 C=Count (#Seconds<1800)
+33 ; X=Greater (#Seconds>1799)
+34 ; #3 C=Count (Protocol/Namespace match)
+35 ; X=Mismatch (Protocol/Namespace mismatch)
+36 FOR S1="C","X"
FOR S2="C","X"
FOR S3="C","X"
SET SUB=S1_S2_S3
Begin DoDot:2
+37 ;->
IF $TRANSLATE(TOT(SUB),"0^","")']""
QUIT
+38 SET ^TMP($JOB,"HLUCMSTORE","U",+IENPAR,SUB)=TOT(SUB)
+39 +40 SET TOT=$GET(^TMP($JOB,"HLUCMSTORE","T",SUB))
+41 DO UPTOT
+42 SET ^TMP($JOB,"HLUCMSTORE","T",SUB)=TOT
+43 +44 SET ^TMP($JOB,"HLUCMSTORE","T",SUB,IENPAR)=TOT(SUB)
+45 +46 SET TOT=$GET(^TMP($JOB,"HLUCMSTORE","T"))
+47 DO UPTOT
+48 SET ^TMP($JOB,"HLUCMSTORE","T")=TOT
End DoDot:2
End DoDot:1
+49 ;
+50 KILL ^TMP($JOB,"HLCHILD"),^TMP($JOB,"HLPARENT")
+51 ;
+52 QUIT
+53 ;
UPTOT ; Up the totals...
+1 ; TOT,TOT(SUB) -- req
+2 SET $PIECE(TOT,U)=$PIECE(TOT,U)+$PIECE(TOT(SUB),U)
+3 SET $PIECE(TOT,U,2)=$PIECE(TOT,U,2)+$PIECE(TOT(SUB),U,2)
+4 SET $PIECE(TOT,U,3)=$PIECE(TOT,U,3)+$PIECE(TOT(SUB),U,3)
+5 QUIT
+6 ;
PP(IEN772) ; Get store value for NMSP and PROT...
+1 NEW PCKG,PP,PROT,X
+2 SET PP=$$PROTNMSP^HLUCM002(+IEN772)
+3 ;->
IF $PIECE(PP,U)']""!($PIECE(PP,U,2)']"")
QUIT U
+4 SET X=$PIECE(PP,U)
SET PROT=$SELECT(X]"":X,1:"ZZZ")
+5 SET X=$PIECE(PP,U,2)
SET PCKG=$SELECT(X]"":X,1:"ZZZ")
+6 QUIT PROT_U_PCKG
+7 ;
LOAD ; Load data (Called by $$CM, $$CM2, and all other APIs)
+1 ; START,END -- req
+2 NEW IEN772,LOOPDT,X
+3 SET LOOPDT=START-.000001
+4 FOR
SET LOOPDT=$ORDER(^HL(772,"B",LOOPDT))
IF LOOPDT'>0!(LOOPDT>END)
QUIT
Begin DoDot:1
+5 SET IEN772=0
+6 FOR
SET IEN772=$ORDER(^HL(772,"B",LOOPDT,IEN772))
IF IEN772'>0
QUIT
Begin DoDot:2
+7 ;->
IF '$$OK772(+IEN772)
QUIT
+8 SET X=$$LOAD772S^HLUCM009(IEN772)
End DoDot:2
End DoDot:1
+9 QUIT
+10 ;
TOTALCM ; Loop, total for $$CM...
+1 ; HLAPI -- req
+2 NEW IEN772,IENPAR
+3 SET IENPAR=0
+4 FOR
SET IENPAR=$ORDER(^TMP($JOB,"HLUCMSTORE","U",IENPAR))
IF 'IENPAR
QUIT
Begin DoDot:1
+5 ; Don't count anything unless the entire unit is OK...
+6 ;->
IF $ORDER(^TMP($JOB,"HLUCMSTORE","U",+IENPAR,"CCC"))]""
QUIT
+7 SET IEN772=0
SET HLUCMADD=""
+8 FOR
SET IEN772=$ORDER(^TMP($JOB,"HLUCMSTORE","U",IENPAR,IEN772))
IF 'IEN772
QUIT
Begin DoDot:2
+9 ;QUIT:'$D(^TMP($J,"HLUCMSTORE","U",+IENPAR,+IEN772,"CCC")) ;->
+10 DO COLLECT(+IENPAR,+IEN772)
+11 IF HLAPI["CM2"
SET HLUCMADD="DON'T ADD. COLLECT3~HLUCM003"
End DoDot:2
End DoDot:1
+12 QUIT
+13 ;
COLLSYNC(IEN772,START,END) ; Does entry fall in START/END range?
+1 NEW DATA,X
+2 ;->
SET DATA=$GET(^TMP($JOB,"HLCHILD",+IEN772))
IF DATA']""
QUIT ""
+3 ;->
SET X=$PIECE($PIECE(DATA,"~",2,999),U,4)
IF X'?7N.E!(X<START)!(X>END)
QUIT ""
+4 QUIT 1
+5 ;
OK772(IEN772) ; Valid entry?
+1 NEW D
+2 SET D=$GET(^HL(772,+IEN772,0))
+3 ;->
IF $PIECE(D,U)'?7N.E
QUIT ""
+4 IF $PIECE(D,U,2)']""
IF $PIECE(D,U,3)']""
IF $PIECE(D,U,4)']""
IF $PIECE(D,U,5)']""
QUIT ""
+5 QUIT 1
+6 ;
COLLECT(PAR,IEN772) ; Collect 772 data and associated 773 data...
+1 NEW CT,CTPCKG,DATA,DBGBL,IEN773,PP,TOT772,TOT772T,TYPEHR,TYPEIO,TYPELR
+2 ;
+3 ; ^("U",PARENT-IEN,CHILD-IEN,"CCC")
+4 SET DATA=$GET(^TMP($JOB,"HLUCMSTORE","U",+PAR,+IEN772,"CCC"))
+5 SET DATA("CHAR")=$PIECE(DATA,U)
SET DATA("DIFF")=$PIECE(DATA,U,3)
+6 SET DATA("START")=$PIECE(DATA,U,4)
SET DATA("END")=$PIECE(DATA,U,5)
+7 SET DATA("FAC")=$PIECE(DATA,U,11)
+8 ;
+9 ; ^("U",PARENT-IEN,CHILD-IEN,"CCC",772)
+10 SET DATA=$GET(^TMP($JOB,"HLUCMSTORE","U",+PAR,+IEN772,"CCC",772))
+11 SET DATA("HR")=$PIECE(DATA,U)
SET DATA("IO")=$PIECE(DATA,U,2)
SET DATA("LR")=$PIECE(DATA,U,3)
+12 SET (DATA("PROT"),PROT)=$PIECE(DATA,U,5)
+13 SET (DATA("PCKG"),PCKG)=$PIECE(DATA,U,6)
+14 ;
+15 SET DBGBL=1
+16 ;
+17 ; Store DATA() info in ^TMP(TOTALS,$J,...)
+18 DO ADDTMP^HLUCM001
+19 ;
+20 QUIT
+21 ;
TOT772C(IEN772) ; Total number of characters in message...
+1 NEW LEN,LNO,TXT
+2 ;
+3 ; Use field if present. (Not present about 25% of time)
+4 SET LEN=$PIECE($GET(^HL(772,IEN772,"S")),U)
+5 ;->
IF LEN
Begin DoDot:1
+6 SET DATA("CHAR",772)=$GET(DATA("CHAR",772))+LEN
+7 SET DATA("CHAR")=$GET(DATA("CHAR"))+LEN
End DoDot:1
QUIT
+8 ;
+9 ; Total manually...
+10 SET LNO=0
+11 FOR
SET LNO=$ORDER(^HL(772,IEN772,"IN",LNO))
IF LNO'>0
QUIT
Begin DoDot:1
+12 ;->
SET TXT=$GET(^HL(772,IEN772,"IN",+LNO,0))
IF TXT']""
QUIT
+13 SET DATA("CHAR",772)=$GET(DATA("CHAR",772))+$LENGTH(TXT)
+14 SET DATA("CHAR")=$GET(DATA("CHAR"))+$LENGTH(TXT)
End DoDot:1
+15 ;
+16 QUIT
+17 ;
TOT772T(IEN772) ; Processing time...
+1 ; No totals here. Just set times in DATA() array for later use...
+2 NEW TIME
+3 ;
+4 ; Time of entry...
+5 SET TIME=+$GET(^HL(772,+IEN772,0))
+6 IF TIME?7N.E
SET DATA("TIME",TIME,772,.01)=""
+7 ;
+8 ; Time processed...
+9 SET TIME=$PIECE($GET(^HL(772,+IEN772,"P")),U,2)
+10 IF TIME?7N.E
SET DATA("TIME",TIME,772,21)=""
+11 ;
+12 QUIT
+13 ;
TOT773C(IEN773) ; Total number of characters...
+1 ; DATA() -- passed in (See COLLECT)
+2 NEW CHAR
+3 ;->
SET CHAR=$$MSGSIZE(+IEN773)
IF CHAR'>0
QUIT
+4 SET DATA("CHAR",773,IEN773)=CHAR
+5 SET DATA("CHAR")=$GET(DATA("CHAR"))+CHAR
+6 SET TOT773(IEN773)=CHAR
+7 QUIT
+8 ;
MSGSIZE(IEN773) ; Number characters in 773 entry...
+1 NEW NCH,NO
+2 SET NCH=0
SET NO=0
+3 FOR
SET NO=$ORDER(^HLMA(+IEN773,"MSH",NO))
IF NO'>0
QUIT
Begin DoDot:1
+4 SET NCH=NCH+$LENGTH($GET(^HLMA(+IEN773,"MSH",+NO,0)))
End DoDot:1
+5 QUIT NCH
+6 ;
TOT773T(IEN773) ; Set TIMEs...
+1 ; DATA() -- passed in (See COLLECT)
+2 NEW TIME
+3 ;
+4 ; Creation time already taken from 772...
+5 ;
+6 ; Processed time...
+7 ;->
SET TIME=+$GET(^HLMA(+IEN773,"S"))
IF TIME'>0
QUIT
+8 SET DATA("TIME",TIME,773,100)=""
+9 ;
+10 QUIT
+11 ;
ERR(REA) ; Record error...
+1 SET NOERR=NOERR+1
+2 SET REA=$SELECT($GET(REA)]"":REA,1:"?")
+3 SET ERRINFO(REA)=""
+4 QUIT
+5 ;
SEC(FMDT) ;
+1 SET FMDT=$$FMTH^XLFDT(FMDT)
+2 QUIT $$SEC^XLFDT(FMDT)
+3 ;
TMDIFF ; DATA("TIME",...) -- req --> DATA("DIFF")
+1 ; Default... HL*1.6*114
SET (DATA("DIFF"),DATA("END"),DATA("START"))=""
+2 ;->
SET DATA("START")=$ORDER(DATA("TIME",0))
IF DATA("START")'>0
QUIT
+3 SET DATA("END")=$ORDER(DATA("TIME",":"),-1)
+4 SET DATA("DIFF")=$$SEC(DATA("END"))-$$SEC(DATA("START"))
+5 QUIT
+6 ;
XTMP ; Store in ^XTMP...
+1 ; API Parameters -- req
+2 NEW XTMP
+3 ;
+4 ;-> Must be ALL,ALL
IF PNMSP'=1!(IEN101'=1)
QUIT
+5 ;
+6 SET XTMP="HLUCM "_$$DT^XLFDT
+7 IF '$DATA(^XTMP(XTMP,0))
SET ^XTMP(XTMP,0)=$$FMADD^XLFDT($$DT^XLFDT,7)_U_$$NOW^XLFDT_U_"HLUCM Data"
+8 ;
+9 SET SVNO=$GET(^XTMP(XTMP,"P",+START,+END,COND))
+10 IF SVNO'>0
SET SVNO=$ORDER(^XTMP(XTMP,"N",":"),-1)+1
+11 SET ^XTMP(XTMP,"P",+START,+END,COND)=SVNO_U_$$NOW^XLFDT
+12 SET ^XTMP(XTMP,"N",+SVNO)=START_U_END_U_COND_U_HLAPI
+13 KILL ^XTMP(XTMP,"D",+SVNO)
+14 ;
+15 MERGE ^XTMP(XTMP,"D",+SVNO)=^TMP(TOTALS,$JOB)
+16 ;
+17 QUIT
+18 ;
EOR ; HLUCM - HL7/Capacity Mgt API ;2/27/01 10:15
