LAMIVTLG ;SLC/CJS/DAL/DRH - LAB AUTOMATED DATA ;7/20/90 08:28 ;
;;5.2;AUTOMATED LAB INSTRUMENTS;**1030**;NOV 01, 1997
;;5.2;AUTOMATED LAB INSTRUMENTS;**12**;Sep 27, 1994;Build 7
;Modified by Hoak for Vitek literal interface
Q
LOG S LINK="",LRDFN=0,DPF=2 I '$G(LOG) G LG2 ;Run by accession number.
I LROVER S ISQN=+$O(^LAH(LWL,1,"C",+LOG,0)) Q:ISQN>0
I '$D(^LRO(68,WL,1,LADT,1,LOG,0)) S LINK="^^"_+LOG G LG2
S X=^(0),LINK=WL_U_LADT_U_LOG,LRDFN=+X,DPF=$P(X,U,2)
LG2 D ISQN S:$G(LOG) ^LAH(LWL,1,"C",LOG,ISQN)="",$P(^LAH(LWL,1,ISQN,0),U,3,5)=LINK S:$G(CENUM) $P(^(0),U,6)=CENUM,^LAH(LWL,1,"D",+CENUM,ISQN)=""
I $D(^LRO(68.2,LWL,1,+TRAY,1,+CUP,0)) S ^(4,ISQN)="" ;,^LAH(LWL,1,"E",+IDE,ISQN)=""
Q
ISQN ;
L +^LAH(LWL)
S (^LAH(LWL),ISQN)=1+$S($D(^LAH(+LWL))#2:^LAH(LWL),1:0)
S:CUP="" TRAY=1,CUP=ISQN
S ^LAH(LWL,1,ISQN,0)=TRAY_U_CUP_"^^^^^"_METH_"^"_+$G(IDE),^LAH(LWL,1,"B",(+TRAY)_";"_(+CUP),ISQN)=""
;
S ^LAH(LWL,1,"E",+$G(IDE),ISQN)="" ;3/6/95 - LJA. Do-Dot Removed...
;
L -^LAH(LWL)
;IDE XREF ADDED TO ENABLE CORRECT IDENTIFIER FOR CX4/CX5 INSTRUMENTS
Q
LLIST S LRDFN=0,DPF=2 I LROVER S ISQN=+$O(^LAH(LWL,1,"B",(+TRAY)_";"_(+CUP),0)) Q:ISQN>0
D ISQN S LINK="^^" ;Run by load/work list number sent.
I $D(^LRO(68.2,+LWL,1,+TRAY,1,+CUP,0)) S LINK=$P(^(0),"^",1,3),^(4,ISQN)=""
S $P(^LAH(LWL,1,ISQN,0),U,3,5)=LINK
S DPF=2 Q:LINK="^^" S WL=+$P(LINK,"^",1),WDT=+$P(LINK,"^",2),LOG=+$P(LINK,"^",3),^LAH(LWL,1,"C",LOG,ISQN)=""
S X=$S($D(^LRO(68,+WL,1,+WDT,1,+LOG,0)):^(0),1:"0^2"),DPF=+$P(X,U,2),LRDFN=+X
Q
SEQN S CUP="" G LLIST ;Run by the order data receved
CENUM S DPF=2,LRDFN=0,LOG=$O(^LRO(68,WL,1,DT,1,"D",+CENUM,0)) G LOG:LOG>0 ;for martinez only
;IF CENUM?1A.ANP S Y=CENUM D CEPACK I Y?.ANP S DFN=$O(^LAB(62.3,"B",Y,0)) I DFN S DPF=62.3
D ISQN S ^LAH(LWL,1,"C",LOG,ISQN)="",^LAH(LWL,1,"D",+CENUM,ISQN)="",$P(^LAH(LWL,1,ISQN,0),U,6)=CENUM
I $D(^LRO(68.2,+LWL,1,+TRAY,1,+CUP,0)) S ^(4,ISQN)=""
Q
IDENT S DPF=2,LRDFN=0,LOG=$O(^LRO(68,WL,1,DT,1,"C",IDENT,0)) G LOG:LOG>0
D ISQN Q
CONTROL ;VERIFY CONTROL'S
Q:'$D(^LRO(68,+WL,1,DT,1,+LOG,0)) Q:$P(^(0),U,2)'=62.3
S LRDFN=+^(0),IDT=9999999-$S($D(^(3)):^(3),1:0) Q:'$D(^LR(LRDFN,"CH",IDT,0)) S $P(^LRO(68,WL,1,DT,1,LOG,3),U,4)=NOW
S $P(^LR(LRDFN,"CH",IDT,0),U,3)=NOW F I=1:0 S I=$O(^LAH(LWL,1,ISQN,I)) Q:I<1 S ^LR(LRDFN,"CH",IDT,I)=^LAH(LWL,1,ISQN,I)
S:'$D(LRTEC) LRTEC=$P(^VA(200,DUZ,0),U,2)
F I=0:0 S I=$O(^LRO(68,WL,1,DT,1,LOG,4,I)) Q:I<1 I +$P(^(I,0),U,3)[LWL,'$P(^(0),U,5) S $P(^(0),U,5)=NOW,$P(^(0),U,4)=LRTEC,^LRO(68,WL,1,DT,1,"AC",NOW,LOG)="",^LRO(68,WL,1,DT,1,"AD",NOW\1,LOG)=""
D CONTXREF K:$D(LOG) ^LAH(LWL,1,"C",+LOG) K ^LAH(LWL,1,"B",(+TRAY)_";"_(+CUP)),^LAH(+LWL,1,ISQN) Q
CEPACK S Y=$P(Y,"\",1),YY="" F I=1:1:$L(Y) S:$A(Y,I)>32 YY=YY_$E(Y,I)
S Y=YY K YY Q
CONTXREF ; Set up verification X-Ref for controls
N DA,LRTEST,LRTN,I,LRGTN,X1,X,S1,J,J1
S LRTEST="" F LRTN=0:0 S LRTN=$O(^LRO(68,WL,1,DT,1,LOG,4,LRTN)) Q:LRTN<1 I $D(^(LRTN,0)),+$P(^(0),U,3)[LWL,+$P(^(0),U,5) S:LRTEST'="" LRTEST=LRTEST_"^"_LRTN S:LRTEST="" LRTEST=LRTN
AC ;
K ^TMP("LR",$J,"T") D ^LREXPD
F X=0:0 S X=$O(^TMP("LR",$J,"T",X)) Q:X<1 S X1=$P(^(X),";",2) I X1,$D(^LR($G(LRDFN),"CH",$G(IDT),$G(X1))) S:'$D(^LRO(68,"AC",LRDFN,IDT,X1)) ^(X1)=""
K ^TMP("LR",$J,"T")
Q
LAMIVTLG ;SLC/CJS/DAL/DRH - LAB AUTOMATED DATA ;7/20/90 08:28 ;
+1 ;;5.2;AUTOMATED LAB INSTRUMENTS;**1030**;NOV 01, 1997
+2 ;;5.2;AUTOMATED LAB INSTRUMENTS;**12**;Sep 27, 1994;Build 7
+3 ;Modified by Hoak for Vitek literal interface
+4 QUIT
LOG ;Run by accession number.
SET LINK=""
SET LRDFN=0
SET DPF=2
IF '$GET(LOG)
GOTO LG2
+1 IF LROVER
SET ISQN=+$ORDER(^LAH(LWL,1,"C",+LOG,0))
IF ISQN>0
QUIT
+2 IF '$DATA(^LRO(68,WL,1,LADT,1,LOG,0))
SET LINK="^^"_+LOG
GOTO LG2
+3 SET X=^(0)
SET LINK=WL_U_LADT_U_LOG
SET LRDFN=+X
SET DPF=$PIECE(X,U,2)
LG2 DO ISQN
IF $GET(LOG)
SET ^LAH(LWL,1,"C",LOG,ISQN)=""
SET $PIECE(^LAH(LWL,1,ISQN,0),U,3,5)=LINK
IF $GET(CENUM)
SET $PIECE(^(0),U,6)=CENUM
SET ^LAH(LWL,1,"D",+CENUM,ISQN)=""
+1 ;,^LAH(LWL,1,"E",+IDE,ISQN)=""
IF $DATA(^LRO(68.2,LWL,1,+TRAY,1,+CUP,0))
SET ^(4,ISQN)=""
+2 QUIT
ISQN ;
+1 LOCK +^LAH(LWL)
+2 SET (^LAH(LWL),ISQN)=1+$SELECT($DATA(^LAH(+LWL))#2:^LAH(LWL),1:0)
+3 IF CUP=""
SET TRAY=1
SET CUP=ISQN
+4 SET ^LAH(LWL,1,ISQN,0)=TRAY_U_CUP_"^^^^^"_METH_"^"_+$GET(IDE)
SET ^LAH(LWL,1,"B",(+TRAY)_";"_(+CUP),ISQN)=""
+5 ;
+6 ;3/6/95 - LJA. Do-Dot Removed...
SET ^LAH(LWL,1,"E",+$GET(IDE),ISQN)=""
+7 ;
+8 LOCK -^LAH(LWL)
+9 ;IDE XREF ADDED TO ENABLE CORRECT IDENTIFIER FOR CX4/CX5 INSTRUMENTS
+10 QUIT
LLIST SET LRDFN=0
SET DPF=2
IF LROVER
SET ISQN=+$ORDER(^LAH(LWL,1,"B",(+TRAY)_";"_(+CUP),0))
IF ISQN>0
QUIT
+1 ;Run by load/work list number sent.
DO ISQN
SET LINK="^^"
+2 IF $DATA(^LRO(68.2,+LWL,1,+TRAY,1,+CUP,0))
SET LINK=$PIECE(^(0),"^",1,3)
SET ^(4,ISQN)=""
+3 SET $PIECE(^LAH(LWL,1,ISQN,0),U,3,5)=LINK
+4 SET DPF=2
IF LINK="^^"
QUIT
SET WL=+$PIECE(LINK,"^",1)
SET WDT=+$PIECE(LINK,"^",2)
SET LOG=+$PIECE(LINK,"^",3)
SET ^LAH(LWL,1,"C",LOG,ISQN)=""
+5 SET X=$SELECT($DATA(^LRO(68,+WL,1,+WDT,1,+LOG,0)):^(0),1:"0^2")
SET DPF=+$PIECE(X,U,2)
SET LRDFN=+X
+6 QUIT
SEQN ;Run by the order data receved
SET CUP=""
GOTO LLIST
CENUM ;for martinez only
SET DPF=2
SET LRDFN=0
SET LOG=$ORDER(^LRO(68,WL,1,DT,1,"D",+CENUM,0))
IF LOG>0
GOTO LOG
+1 ;IF CENUM?1A.ANP S Y=CENUM D CEPACK I Y?.ANP S DFN=$O(^LAB(62.3,"B",Y,0)) I DFN S DPF=62.3
+2 DO ISQN
SET ^LAH(LWL,1,"C",LOG,ISQN)=""
SET ^LAH(LWL,1,"D",+CENUM,ISQN)=""
SET $PIECE(^LAH(LWL,1,ISQN,0),U,6)=CENUM
+3 IF $DATA(^LRO(68.2,+LWL,1,+TRAY,1,+CUP,0))
SET ^(4,ISQN)=""
+4 QUIT
IDENT SET DPF=2
SET LRDFN=0
SET LOG=$ORDER(^LRO(68,WL,1,DT,1,"C",IDENT,0))
IF LOG>0
GOTO LOG
+1 DO ISQN
QUIT
CONTROL ;VERIFY CONTROL'S
+1 IF '$DATA(^LRO(68,+WL,1,DT,1,+LOG,0))
QUIT
IF $PIECE(^(0),U,2)'=62.3
QUIT
+2 SET LRDFN=+^(0)
SET IDT=9999999-$SELECT($DATA(^(3)):^(3),1:0)
IF '$DATA(^LR(LRDFN,"CH",IDT,0))
QUIT
SET $PIECE(^LRO(68,WL,1,DT,1,LOG,3),U,4)=NOW
+3 SET $PIECE(^LR(LRDFN,"CH",IDT,0),U,3)=NOW
FOR I=1:0
SET I=$ORDER(^LAH(LWL,1,ISQN,I))
IF I<1
QUIT
SET ^LR(LRDFN,"CH",IDT,I)=^LAH(LWL,1,ISQN,I)
+4 IF '$DATA(LRTEC)
SET LRTEC=$PIECE(^VA(200,DUZ,0),U,2)
+5 FOR I=0:0
SET I=$ORDER(^LRO(68,WL,1,DT,1,LOG,4,I))
IF I<1
QUIT
IF +$PIECE(^(I,0),U,3)[LWL
IF '$PIECE(^(0),U,5)
SET $PIECE(^(0),U,5)=NOW
SET $PIECE(^(0),U,4)=LRTEC
SET ^LRO(68,WL,1,DT,1,"AC",NOW,LOG)=""
SET ^LRO(68,WL,1,DT,1,"AD",NOW\1,LOG)=""
+6 DO CONTXREF
IF $DATA(LOG)
KILL ^LAH(LWL,1,"C",+LOG)
KILL ^LAH(LWL,1,"B",(+TRAY)_";"_(+CUP)),^LAH(+LWL,1,ISQN)
QUIT
CEPACK SET Y=$PIECE(Y,"\",1)
SET YY=""
FOR I=1:1:$LENGTH(Y)
IF $ASCII(Y,I)>32
SET YY=YY_$EXTRACT(Y,I)
+1 SET Y=YY
KILL YY
QUIT
CONTXREF ; Set up verification X-Ref for controls
+1 NEW DA,LRTEST,LRTN,I,LRGTN,X1,X,S1,J,J1
+2 SET LRTEST=""
FOR LRTN=0:0
SET LRTN=$ORDER(^LRO(68,WL,1,DT,1,LOG,4,LRTN))
IF LRTN<1
QUIT
IF $DATA(^(LRTN,0))
IF +$PIECE(^(0),U,3)[LWL
IF +$PIECE(^(0),U,5)
IF LRTEST'=""
SET LRTEST=LRTEST_"^"_LRTN
IF LRTEST=""
SET LRTEST=LRTN
AC ;
+1 KILL ^TMP("LR",$JOB,"T")
DO ^LREXPD
+2 FOR X=0:0
SET X=$ORDER(^TMP("LR",$JOB,"T",X))
IF X<1
QUIT
SET X1=$PIECE(^(X),";",2)
IF X1
IF $DATA(^LR($GET(LRDFN),"CH",$GET(IDT),$GET(X1)))
IF '$DATA(^LRO(68,"AC",LRDFN,IDT,X1))
SET ^(X1)=""
+3 KILL ^TMP("LR",$JOB,"T")
+4 QUIT
