PSXRCVRY ;BIR/WPB/PDW-CMOP Utility to reset transmissions at remote ;11 Jul 2002
;;2.0;CMOP;**1,3,28,41**;11 Apr 97
;Reference to ^PS(52.5 supported by DBIA #1978
;Reference to ^PSRX( supported by DBIA #1977
;
EN D SET^PSXSYS
N ZTSK S ZTSK=$P(^PSX(550,+PSXSYS,3),"^",2),PSX=+PSXSYS
;
Q:$G(PSXSYS)'>0
G:$G(ZTSK)'>0 EN1
D STAT^%ZTLOAD
I ($G(ZTSK(1))=1&($G(ZTSK(2))["Active"))!($G(ZTSK(1))=2&($G(ZTSK(2))["Active")) W !,"There is a transmission in progress, try again later." Q
EN1 ;I '$G(ARCVRY) W !,"Please wait, checking for data to send."
D:'$D(PSXSYS) SET^PSXSYS
;N PSXSYS D SET^PSXSYS Q:$G(PSXSYS)'>0 S PSXSTAT="T" D PSXSTAT^PSXRSYU K PSXSTAT
;S LAST=$P(^PSX(550,PSX,3),"^",1) K ^PSX("CMOP TRAN")
;loop transmissions 550.2 "AQ" for batches started
L ^PSX(550.1):30 I '$T W !,"A transmission build is in process, try again later" Q
S PSXBAT=0 F S PSXBAT=$O(^PSX(550.2,"AQ",PSXBAT)) Q:PSXBAT'>0 D
. D RSTBATCH(PSXBAT),MMSG,CLNRXQUE(PSXBAT),CLOSEBAT,SUSRST
Q
RSTBATCH(PSXBAT) ; given PSXBAT reset RXs into CMOP SUSPENSE, (code also in re-transmit a batch)
; pull, reset RXs from 550.2 RX multiple
S PSXBATNM=$$GET1^DIQ(550.2,PSXBAT,.01)
I '$D(^PSX(550.2,PSXBAT,15)) D BLDRXM(PSXBAT) ;build RX multiple from 550.1,"C"
S PSXTRXDA=0,RXCNT=0 F S PSXTRXDA=$O(^PSX(550.2,PSXBAT,15,PSXTRXDA)) Q:PSXTRXDA'>0 S PSX0=^PSX(550.2,PSXBAT,15,PSXTRXDA,0) D
. F YY="RXDA^1","RXFL^2","PSXHOST^4" D PIECE^PSXUTL(PSX0,U,YY)
. D RESET^PSXNEW(RXDA,RXFL,PSXBATNM_" Transmission Recovery") ; resets RX 52.5, 52 into CMOP suspense
Q
CLNRXQUE(PSXBAT) ; locate 550.1 entries associated with transmission PSXBAT and remove
K DIK,DA N PSXRXQDA
S DIK="^PSX(550.1,"
S PSXRXQDA=0 F S PSXRXQDA=$O(^PSX(550.1,"C",PSXBAT,PSXRXQDA)) Q:PSXRXQDA'>0 S DA=PSXRXQDA D ^DIK
K DIK,DA
Q
EXIT K DFN,PTR,REC,SDT,LAST,PSXBAT,PSXTRNBT,PSXRXQDA,PSXTRXDA,RXDA,RXFL
Q
MMSG ;
S SITE=$P($G(PSXSYS),"^",3) K PSXTRNBT
D GETS^DIQ(550.2,PSXBAT,".01;2;3;4;5;6;17","","PSXTRNBT"),TOP^PSXUTL("PSXTRNBT")
S XMSUB="CMOP Recovery Message "_$G(SITE),XMDUN="CMOP Managers",XMDUZ=.5
D XMZ^XMA2 G:$G(XMZ)'>0 EXIT
S ^XMB(3.9,XMZ,2,1,0)="The last CMOP transmission did not complete properly. The data for this"
S ^XMB(3.9,XMZ,2,2,0)="transmission will be sent to the CMOP during the next transmission for"
S ^XMB(3.9,XMZ,2,3,0)="that division."
S ^XMB(3.9,XMZ,2,4,0)=""
S ^XMB(3.9,XMZ,2,5,0)="If you have scheduled auto transmissions for CMOP, please check to see"
S ^XMB(3.9,XMZ,2,6,0)="that they are still scheduled for the correct time."
S ^XMB(3.9,XMZ,2,7,0)=""
S ^XMB(3.9,XMZ,2,8,0)="This message is just a notification that problems were detected with the last"
S ^XMB(3.9,XMZ,2,9,0)="transmission and that the data will be sent to the CMOP facility for processing."
S ^XMB(3.9,XMZ,2,10,0)="If you are getting this message frequently, please contact your IRM staff."
S ^XMB(3.9,XMZ,2,11,0)="Otherwise there is not anything that you need to do."
S ^XMB(3.9,XMZ,2,12,0)=" "
S ^XMB(3.9,XMZ,2,13,0)="Transmission: "_PSXTRNBT(.01)
S ^XMB(3.9,XMZ,2,14,0)="Division: "_PSXTRNBT(2)
S ^XMB(3.9,XMZ,2,15,0)="CMOP Host: "_PSXTRNBT(3)
S ^XMB(3.9,XMZ,2,16,0)="Type: "_PSXTRNBT(17)
S ^XMB(3.9,XMZ,2,17,0)="Date/Time: "_PSXTRNBT(5)
S ^XMB(3.9,XMZ,2,18,0)=" "
S ^XMB(3.9,XMZ,2,19,0)="The prescriptions have been reset into CMOP suspense"
S ^XMB(3.9,XMZ,2,20,0)="and this transmission has been closed"
S ^XMB(3.9,XMZ,2,0)="^3.92A^20^20^"_DT
D GRP^PSXNOTE
D ENT1^XMD
K XMSUB,XMDUZ,XMDUN,XMZ,XMY,SITE,BADBAT
Q
CLOSEBAT ; close failed transmission PSXBAT in 550.2
K DIE,DA,DR
S DIE="^PSX(550.2,",DA=PSXBAT,DR="1////4" D ^DIE
K DIE,DA,DR
Q
SUSRST ; reset any RXs in suspense with 'L'oading status
F RXTYP="N","C" F STAT="L" I $D(^PS(52.5,"CMP",STAT,RXTYP)) S DIV=0 F S DIV=$O(^PS(52.5,"CMP",STAT,RXTYP,DIV)) Q:DIV'>0 D
. S SUSDT=0 F S SUSDT=$O(^PS(52.5,"CMP",STAT,RXTYP,DIV,SUSDT)) Q:SUSDT'>0 D DFN
Q
DFN S DFN=0 F S DFN=$O(^PS(52.5,"CMP",STAT,RXTYP,DIV,SUSDT,DFN)) Q:DFN'>0 D
. S SUSDA=0 F S SUSDA=$O(^PS(52.5,"CMP",STAT,RXTYP,DIV,SUSDT,DFN,SUSDA)) Q:SUSDA'>0 D SUSRX
Q
SUSRX ; reset suspense RX
S SUSRX=$P(^PS(52.5,SUSDA,0),U)
D RESET^PSXNEW(SUSRX,0,"Recovery")
Q
BLDRXM(PSXBAT) ; build 550.2 RX multiple from 550.1,"C" given PSXBAT batch ien
; can be used for postinit
S ORD=0 F S ORD=$O(^PSX(550.1,"C",PSXBAT,ORD)) Q:ORD'>0 D
. S LN=0 F S LN=$O(^PSX(550.1,ORD,"T",LN)) Q:LN'>0 S TXT=^(LN,0) I $P(TXT,"|")="RX1" D
.. S RX=$P(TXT,"|",2),RXF=$P(RX,"-",3)-1,RX=$P(RX,"-",2),PSXPTR=$O(^PSRX("B",RX,0))
.. S DFN=$P(^PSRX(PSXPTR,0),U,2),REC=$O(^PS(52.5,"B",PSXPTR,0))
.. K DD,DO,DIC,DA,DR,D0
.. S:'$D(^PSX(550.2,PSXBAT,15,0)) ^PSX(550.2,PSXBAT,15,0)="^550.215P^^"
.. S X=RX,DA(1)=PSXBAT
.. S DIC="^PSX(550.2,"_PSXBAT_",15,",DIC(0)="LX",DLAYGO=550.2
.. S DIC("DR")=".02////^S X=RXF;.03////^S X=DFN;.04////^S X=REC"
.. D ^DIC
.. K DD,DO,DIC,DA,DR,D0
Q
PSXRCVRY ;BIR/WPB/PDW-CMOP Utility to reset transmissions at remote ;11 Jul 2002
+1 ;;2.0;CMOP;**1,3,28,41**;11 Apr 97
+2 ;Reference to ^PS(52.5 supported by DBIA #1978
+3 ;Reference to ^PSRX( supported by DBIA #1977
+4 ;
EN DO SET^PSXSYS
+1 NEW ZTSK
SET ZTSK=$PIECE(^PSX(550,+PSXSYS,3),"^",2)
SET PSX=+PSXSYS
+2 ;
+3 IF $GET(PSXSYS)'>0
QUIT
+4 IF $GET(ZTSK)'>0
GOTO EN1
+5 DO STAT^%ZTLOAD
+6 IF ($GET(ZTSK(1))=1&($GET(ZTSK(2))["Active"))!($GET(ZTSK(1))=2&($GET(ZTSK(2))["Active"))
WRITE !,"There is a transmission in progress, try again later."
QUIT
EN1 ;I '$G(ARCVRY) W !,"Please wait, checking for data to send."
+1 IF '$DATA(PSXSYS)
DO SET^PSXSYS
+2 ;N PSXSYS D SET^PSXSYS Q:$G(PSXSYS)'>0 S PSXSTAT="T" D PSXSTAT^PSXRSYU K PSXSTAT
+3 ;S LAST=$P(^PSX(550,PSX,3),"^",1) K ^PSX("CMOP TRAN")
+4 ;loop transmissions 550.2 "AQ" for batches started
+5 LOCK ^PSX(550.1):30
IF '$TEST
WRITE !,"A transmission build is in process, try again later"
QUIT
+6 SET PSXBAT=0
FOR
SET PSXBAT=$ORDER(^PSX(550.2,"AQ",PSXBAT))
IF PSXBAT'>0
QUIT
Begin DoDot:1
+7 DO RSTBATCH(PSXBAT)
DO MMSG
DO CLNRXQUE(PSXBAT)
DO CLOSEBAT
DO SUSRST
End DoDot:1
+8 QUIT
RSTBATCH(PSXBAT) ; given PSXBAT reset RXs into CMOP SUSPENSE, (code also in re-transmit a batch)
+1 ; pull, reset RXs from 550.2 RX multiple
+2 SET PSXBATNM=$$GET1^DIQ(550.2,PSXBAT,.01)
+3 ;build RX multiple from 550.1,"C"
IF '$DATA(^PSX(550.2,PSXBAT,15))
DO BLDRXM(PSXBAT)
+4 SET PSXTRXDA=0
SET RXCNT=0
FOR
SET PSXTRXDA=$ORDER(^PSX(550.2,PSXBAT,15,PSXTRXDA))
IF PSXTRXDA'>0
QUIT
SET PSX0=^PSX(550.2,PSXBAT,15,PSXTRXDA,0)
Begin DoDot:1
+5 FOR YY="RXDA^1","RXFL^2","PSXHOST^4"
DO PIECE^PSXUTL(PSX0,U,YY)
+6 ; resets RX 52.5, 52 into CMOP suspense
DO RESET^PSXNEW(RXDA,RXFL,PSXBATNM_" Transmission Recovery")
End DoDot:1
+7 QUIT
CLNRXQUE(PSXBAT) ; locate 550.1 entries associated with transmission PSXBAT and remove
+1 KILL DIK,DA
NEW PSXRXQDA
+2 SET DIK="^PSX(550.1,"
+3 SET PSXRXQDA=0
FOR
SET PSXRXQDA=$ORDER(^PSX(550.1,"C",PSXBAT,PSXRXQDA))
IF PSXRXQDA'>0
QUIT
SET DA=PSXRXQDA
DO ^DIK
+4 KILL DIK,DA
+5 QUIT
EXIT KILL DFN,PTR,REC,SDT,LAST,PSXBAT,PSXTRNBT,PSXRXQDA,PSXTRXDA,RXDA,RXFL
+1 QUIT
MMSG ;
+1 SET SITE=$PIECE($GET(PSXSYS),"^",3)
KILL PSXTRNBT
+2 DO GETS^DIQ(550.2,PSXBAT,".01;2;3;4;5;6;17","","PSXTRNBT")
DO TOP^PSXUTL("PSXTRNBT")
+3 SET XMSUB="CMOP Recovery Message "_$GET(SITE)
SET XMDUN="CMOP Managers"
SET XMDUZ=.5
+4 DO XMZ^XMA2
IF $GET(XMZ)'>0
GOTO EXIT
+5 SET ^XMB(3.9,XMZ,2,1,0)="The last CMOP transmission did not complete properly. The data for this"
+6 SET ^XMB(3.9,XMZ,2,2,0)="transmission will be sent to the CMOP during the next transmission for"
+7 SET ^XMB(3.9,XMZ,2,3,0)="that division."
+8 SET ^XMB(3.9,XMZ,2,4,0)=""
+9 SET ^XMB(3.9,XMZ,2,5,0)="If you have scheduled auto transmissions for CMOP, please check to see"
+10 SET ^XMB(3.9,XMZ,2,6,0)="that they are still scheduled for the correct time."
+11 SET ^XMB(3.9,XMZ,2,7,0)=""
+12 SET ^XMB(3.9,XMZ,2,8,0)="This message is just a notification that problems were detected with the last"
+13 SET ^XMB(3.9,XMZ,2,9,0)="transmission and that the data will be sent to the CMOP facility for processing."
+14 SET ^XMB(3.9,XMZ,2,10,0)="If you are getting this message frequently, please contact your IRM staff."
+15 SET ^XMB(3.9,XMZ,2,11,0)="Otherwise there is not anything that you need to do."
+16 SET ^XMB(3.9,XMZ,2,12,0)=" "
+17 SET ^XMB(3.9,XMZ,2,13,0)="Transmission: "_PSXTRNBT(.01)
+18 SET ^XMB(3.9,XMZ,2,14,0)="Division: "_PSXTRNBT(2)
+19 SET ^XMB(3.9,XMZ,2,15,0)="CMOP Host: "_PSXTRNBT(3)
+20 SET ^XMB(3.9,XMZ,2,16,0)="Type: "_PSXTRNBT(17)
+21 SET ^XMB(3.9,XMZ,2,17,0)="Date/Time: "_PSXTRNBT(5)
+22 SET ^XMB(3.9,XMZ,2,18,0)=" "
+23 SET ^XMB(3.9,XMZ,2,19,0)="The prescriptions have been reset into CMOP suspense"
+24 SET ^XMB(3.9,XMZ,2,20,0)="and this transmission has been closed"
+25 SET ^XMB(3.9,XMZ,2,0)="^3.92A^20^20^"_DT
+26 DO GRP^PSXNOTE
+27 DO ENT1^XMD
+28 KILL XMSUB,XMDUZ,XMDUN,XMZ,XMY,SITE,BADBAT
+29 QUIT
CLOSEBAT ; close failed transmission PSXBAT in 550.2
+1 KILL DIE,DA,DR
+2 SET DIE="^PSX(550.2,"
SET DA=PSXBAT
SET DR="1////4"
DO ^DIE
+3 KILL DIE,DA,DR
+4 QUIT
SUSRST ; reset any RXs in suspense with 'L'oading status
+1 FOR RXTYP="N","C"
FOR STAT="L"
IF $DATA(^PS(52.5,"CMP",STAT,RXTYP))
SET DIV=0
FOR
SET DIV=$ORDER(^PS(52.5,"CMP",STAT,RXTYP,DIV))
IF DIV'>0
QUIT
Begin DoDot:1
+2 SET SUSDT=0
FOR
SET SUSDT=$ORDER(^PS(52.5,"CMP",STAT,RXTYP,DIV,SUSDT))
IF SUSDT'>0
QUIT
DO DFN
End DoDot:1
+3 QUIT
DFN SET DFN=0
FOR
SET DFN=$ORDER(^PS(52.5,"CMP",STAT,RXTYP,DIV,SUSDT,DFN))
IF DFN'>0
QUIT
Begin DoDot:1
+1 SET SUSDA=0
FOR
SET SUSDA=$ORDER(^PS(52.5,"CMP",STAT,RXTYP,DIV,SUSDT,DFN,SUSDA))
IF SUSDA'>0
QUIT
DO SUSRX
End DoDot:1
+2 QUIT
SUSRX ; reset suspense RX
+1 SET SUSRX=$PIECE(^PS(52.5,SUSDA,0),U)
+2 DO RESET^PSXNEW(SUSRX,0,"Recovery")
+3 QUIT
BLDRXM(PSXBAT) ; build 550.2 RX multiple from 550.1,"C" given PSXBAT batch ien
+1 ; can be used for postinit
+2 SET ORD=0
FOR
SET ORD=$ORDER(^PSX(550.1,"C",PSXBAT,ORD))
IF ORD'>0
QUIT
Begin DoDot:1
+3 SET LN=0
FOR
SET LN=$ORDER(^PSX(550.1,ORD,"T",LN))
IF LN'>0
QUIT
SET TXT=^(LN,0)
IF $PIECE(TXT,"|")="RX1"
Begin DoDot:2
+4 SET RX=$PIECE(TXT,"|",2)
SET RXF=$PIECE(RX,"-",3)-1
SET RX=$PIECE(RX,"-",2)
SET PSXPTR=$ORDER(^PSRX("B",RX,0))
+5 SET DFN=$PIECE(^PSRX(PSXPTR,0),U,2)
SET REC=$ORDER(^PS(52.5,"B",PSXPTR,0))
+6 KILL DD,DO,DIC,DA,DR,D0
+7 IF '$DATA(^PSX(550.2,PSXBAT,15,0))
SET ^PSX(550.2,PSXBAT,15,0)="^550.215P^^"
+8 SET X=RX
SET DA(1)=PSXBAT
+9 SET DIC="^PSX(550.2,"_PSXBAT_",15,"
SET DIC(0)="LX"
SET DLAYGO=550.2
+10 SET DIC("DR")=".02////^S X=RXF;.03////^S X=DFN;.04////^S X=REC"
+11 DO ^DIC
+12 KILL DD,DO,DIC,DA,DR,D0
End DoDot:2
End DoDot:1
+13 QUIT
