RA97PST ;;HINES/RVD Post-init for BI-RADS and File 79.4 ; 10/10/08
;;5.0;Radiology/Nuclear Medicine;**97**;Mar 16, 1998;Build 6
; This is the post-install routine for patch RA*5.0*97
;
; Supported IA's
; BMES^XPDUTL = 10141
; KSP^XUPARAM = 2541
; UPDATE^DIE = 2053
; GET1^DIQ = 2056
; ^XMD = 10070
;
; Private IA's
; Set Identifier "WRITE" node = 5418
; Insert "I" in ^RA(78.3,0), piece 2 = 5419
;
;1. Add records to file 78.3
; If there are no IENs 1100 thru 1106 and 1200 thru 1202
; then this routine will add records to file #78.3 using
; these IENs and set the 3rd piece of ^RA(78.3,0) to the
; highest IEN under IEN 999.
;
;2. Set the Identifier "WRITE" node for file 78.3's field 6
;
;3. Insert "I" into ^RA(78.3,0), piece 2, after file number
Q
CRE ;create BI-RADS entry in file 78.3
Q ;I '$D(DUZ)#2 D BMES^XPDUTL("*** Missing DUZ. Post-init not done. ***") Q
N RAIEN,RALEX,RAERR,RA,RAI,RAFLG,RAFDA,RAFAC,RANXT,RAD,RAPA,RAPAPG
N RA1,RA2,RA3,RAAA,RACT,RATXT,RAX
D BMES^XPDUTL("*** ADDING BI-RADS to file #78.3.")
D BIR^RA97PST1("MAMMOGRAM",.RA,"","BIR","MQSA","MAMMOGRAPHY ASSESSMENT CATEGORIES")
;check to see if the facility has records within the
;1100 thru 1106 and 1200 thru 1202 IEN range within file #78.3,
;the DIAGNOSTIC CODES file.
;If there are, proceed with the install any way
;but:
;1) DO NOT alter the data (change pointers) in the file at the facility
;2) Send an email to an Outlook mail group identifying the facility
; where the conflict occurs.
;If there is no conflict, then add the IEN records to file 78.3
;RAFLG=1 means a record already exist in file 78.3 for the
;range 1100 thru 1106 and 1200 thru 1202.
S RAFLG=0,RANXT=0
S RACT=0 ;counts number of successfully added records
;
;example:
; check range 1100 thru 1106 and build RAD array
; ra(3)="84^Benign ^Category 2" <-- in
;rad(1102)="84^Benign ^CATEGORY 2" <-- out
;
F RAI=1100:1:1106 D Q:RAFLG=1
.S RANXT=$O(RA(RANXT))
.I $D(^RA(78.3,RAI,0)) S RAFLG=1 Q
.S RAD(RAI)=RA(RANXT)
.S $P(RAD(RAI),U,3)=$$UP^XLFSTR($P(RAD(RAI),U,3))
.;remove trailing blank from piece 2
.S RAX=$P(RAD(RAI),U,2),RA2=$L(RAX)
.S:$E(RAX,RA2)=" " $P(RAD(RAI),U,2)=$E(RAX,1,RA2-1)
.Q
; check range 1200 thru 1202
I 'RAFLG F RAI=1200:1:1202 D Q:RAFLG=1
.I $D(^RA(78.3,RAI,0)) S RAFLG=1 Q
.Q
;
;if RAFLG=1 email Outlook mail group, skip to ID section
I RAFLG=1 D G ID
.S RAFAC=$$GET1^DIQ(4,+$$KSP^XUPARAM("INST"),.01)
.N XMDUZ,XMSUB,XMTEXT,XMY,XMZ S XMDUZ=.5
.S RATXT(1)=RAFAC_" has a conflict with one or more IENS in file 78.3,"
.S RATXT(2)="DIAGNOSTIC CODES, in the range 1100-1106 and 1200-1202."
.S XMSUB="DIAGNOSTIC CODES file IEN issue @ "_RAFAC,XMTEXT="RATXT("
.S XMY(DUZ)="" ;send Vista email of problem to the patch installer
.; Define Outlook mail group to receive email of problem
.S XMY("VAOITVHITRadiologyFacilityLevelApplicationIssues@va.gov")=""
.NEW DIFROM
.D ^XMD,BMES^XPDUTL(.RATXT)
.Q
;
; Set up RAAA() for the Abdominal Aortic Aneurysm codes
;raaa(IEN file 78.3)=field .01^field 2^fields 3 and 4
F RAI=1:1 S RAX=$T(AAACODE+RAI) Q:RAX="" D
.S RAX=$P(RAX,";;",2) ;redefine RAX
.S RA1=$P(RAX,U,1),RA2=$P(RAX,U,2),RA3=$P(RAX,U,3)
.S:RA2=1 $P(RAAA(RA1),U,1)=RA3
.S:RA2=2 $P(RAAA(RA1),U,2)=RA3
.S:RA2=3 $P(RAAA(RA1),U,3)=RA3
.Q
;
;Add the BI-RADS codes to file 78.3
D
.S RAI=0 F S RAI=$O(RAD(RAI)) Q:RAI="" D
..S RAPA=$P($P(RAD(RAI),U,3),"CATEGORY ",2)
..;categories 0,3,4,5,6 have alerts
..S RAPAPG="n" S:"^0^3^4^5^6^"[("^"_RAPA_"^") RAPAPG="y"
..S RAFDA(78.3,"+1,",.01)="BI-RADS "_$P(RAD(RAI),U,3)
..S RAFDA(78.3,"+1,",2)=$E($P(RAD(RAI),U,2),1,80)
..S RAFDA(78.3,"+1,",3)=$$UP^XLFSTR(RAPAPG)
..S RAFDA(78.3,"+1,",4)=RAPAPG
..S RAFDA(78.3,"+1,",6)=$P(RAD(RAI),U,1)
..S RAIEN(1)=RAI
..D UPDATE^DIE("","RAFDA","RAIEN","RAERR")
..I $D(RAERR)#2 D
...S RATXT(1)="",RATXT(2)="Error adding "_$P(RAD(RAI),U,3)_" to the"
...S RATXT(3)="local DIAGNOSTIC CODES file #78.3." D BMES^XPDUTL(.RATXT)
..E S RACT=RACT+1
..K RAFDA,RAIEN,RAERR
..Q
.Q
;
; Add the AAA codes to file 78.3
D
.S RA1=0 F S RA1=$O(RAAA(RA1)) Q:RA1="" D
..S RAPAPG=$P(RAAA(RA1),U,3)
..S RAFDA(78.3,"+1,",.01)=$P(RAAA(RA1),U,1)
..S RAFDA(78.3,"+1,",2)=$P(RAAA(RA1),U,2)
..S RAFDA(78.3,"+1,",3)=$$UP^XLFSTR(RAPAPG)
..S RAFDA(78.3,"+1,",4)=RAPAPG
..S RAIEN(1)=RA1
..D UPDATE^DIE("","RAFDA","RAIEN","RAERR")
..I $D(RAERR)#2 D
...S RATXT(1)=""
...S RATXT(2)="Error adding "_$P(RAAA(RA1),U,1)_" to the"
...S RATXT(3)="local DIAGNOSTIC CODES file #78.3." D BMES^XPDUTL(.RATXT)
..E S RACT=RACT+1
..K RAFDA,RAIEN,RAERR
K RATXT
S RATXT(1)=""
S RATXT(2)="*** "_RACT_" of 10 BI-RADS and Abdominal Aortic Aneurysm codes"
S RATXT(3)="have been successfully added to the DIAGNOSTIC CODES file #78.3. ***"
D BMES^XPDUTL(.RATXT)
;put 3rd piece of ^RA(78.3,0) to highest value but under 999
S RA1=$O(^RA(78.3,999),-1)
S $P(^RA(78.3,0),U,3)=RA1
ID ;set Identifier "WRITE" node and insert "I"
I '$D(^DD(78.3,0,"ID","WRITE")) D
.S ^DD(78.3,0,"ID","WRITE")="D EN^DDIOL($$EN1^RABIRAD,"""",""?33"")"
.D BMES^XPDUTL("*** Identifier ""WRITE"" has been added to file #78.3.")
; set "I" after file number in ^RA(78.3,0)
S RA1=$P(^RA(78.3,0),U,2) I RA1=78.3 D
.S $P(^RA(78.3,0),U,2)=RA1_"I"
.D BMES^XPDUTL("*** ""I"" has been inserted to ^RA(78.3,0).")
Q
AAACODE ; Abdominal Aortic Aneurysm codes
;;1200^1^ABDOMINAL AORTIC ANEURYSM NOT PRESENT
;;1200^2^The maximum width of the infrarenal aorta is less than three centimeters.
;;1200^3^n
;;1201^1^ABDOMINAL AORTIC ANEURYSM PRESENT
;;1201^2^The maximum width of the infrarenal aorta is at least three centimeters.
;;1201^3^y
;;1202^1^DOES NOT SATISFY SCREEN FOR AAA
;;1202^2^Exam is not technically adequate for AAA screening.
;;1202^3^n
RA97PST ;;HINES/RVD Post-init for BI-RADS and File 79.4 ; 10/10/08
+1 ;;5.0;Radiology/Nuclear Medicine;**97**;Mar 16, 1998;Build 6
+2 ; This is the post-install routine for patch RA*5.0*97
+3 ;
+4 ; Supported IA's
+5 ; BMES^XPDUTL = 10141
+6 ; KSP^XUPARAM = 2541
+7 ; UPDATE^DIE = 2053
+8 ; GET1^DIQ = 2056
+9 ; ^XMD = 10070
+10 ;
+11 ; Private IA's
+12 ; Set Identifier "WRITE" node = 5418
+13 ; Insert "I" in ^RA(78.3,0), piece 2 = 5419
+14 ;
+15 ;1. Add records to file 78.3
+16 ; If there are no IENs 1100 thru 1106 and 1200 thru 1202
+17 ; then this routine will add records to file #78.3 using
+18 ; these IENs and set the 3rd piece of ^RA(78.3,0) to the
+19 ; highest IEN under IEN 999.
+20 ;
+21 ;2. Set the Identifier "WRITE" node for file 78.3's field 6
+22 ;
+23 ;3. Insert "I" into ^RA(78.3,0), piece 2, after file number
+24 QUIT
CRE ;create BI-RADS entry in file 78.3
+1 ;I '$D(DUZ)#2 D BMES^XPDUTL("*** Missing DUZ. Post-init not done. ***") Q
QUIT
+2 NEW RAIEN,RALEX,RAERR,RA,RAI,RAFLG,RAFDA,RAFAC,RANXT,RAD,RAPA,RAPAPG
+3 NEW RA1,RA2,RA3,RAAA,RACT,RATXT,RAX
+4 DO BMES^XPDUTL("*** ADDING BI-RADS to file #78.3.")
+5 DO BIR^RA97PST1("MAMMOGRAM",.RA,"","BIR","MQSA","MAMMOGRAPHY ASSESSMENT CATEGORIES")
+6 ;check to see if the facility has records within the
+7 ;1100 thru 1106 and 1200 thru 1202 IEN range within file #78.3,
+8 ;the DIAGNOSTIC CODES file.
+9 ;If there are, proceed with the install any way
+10 ;but:
+11 ;1) DO NOT alter the data (change pointers) in the file at the facility
+12 ;2) Send an email to an Outlook mail group identifying the facility
+13 ; where the conflict occurs.
+14 ;If there is no conflict, then add the IEN records to file 78.3
+15 ;RAFLG=1 means a record already exist in file 78.3 for the
+16 ;range 1100 thru 1106 and 1200 thru 1202.
+17 SET RAFLG=0
SET RANXT=0
+18 ;counts number of successfully added records
SET RACT=0
+19 ;
+20 ;example:
+21 ; check range 1100 thru 1106 and build RAD array
+22 ; ra(3)="84^Benign ^Category 2" <-- in
+23 ;rad(1102)="84^Benign ^CATEGORY 2" <-- out
+24 ;
+25 FOR RAI=1100:1:1106
Begin DoDot:1
+26 SET RANXT=$ORDER(RA(RANXT))
+27 IF $DATA(^RA(78.3,RAI,0))
SET RAFLG=1
QUIT
+28 SET RAD(RAI)=RA(RANXT)
+29 SET $PIECE(RAD(RAI),U,3)=$$UP^XLFSTR($PIECE(RAD(RAI),U,3))
+30 ;remove trailing blank from piece 2
+31 SET RAX=$PIECE(RAD(RAI),U,2)
SET RA2=$LENGTH(RAX)
+32 IF $EXTRACT(RAX,RA2)=" "
SET $PIECE(RAD(RAI),U,2)=$EXTRACT(RAX,1,RA2-1)
+33 QUIT
End DoDot:1
IF RAFLG=1
QUIT
+34 ; check range 1200 thru 1202
+35 IF 'RAFLG
FOR RAI=1200:1:1202
Begin DoDot:1
+36 IF $DATA(^RA(78.3,RAI,0))
SET RAFLG=1
QUIT
+37 QUIT
End DoDot:1
IF RAFLG=1
QUIT
+38 ;
+39 ;if RAFLG=1 email Outlook mail group, skip to ID section
+40 IF RAFLG=1
Begin DoDot:1
+41 SET RAFAC=$$GET1^DIQ(4,+$$KSP^XUPARAM("INST"),.01)
+42 NEW XMDUZ,XMSUB,XMTEXT,XMY,XMZ
SET XMDUZ=.5
+43 SET RATXT(1)=RAFAC_" has a conflict with one or more IENS in file 78.3,"
+44 SET RATXT(2)="DIAGNOSTIC CODES, in the range 1100-1106 and 1200-1202."
+45 SET XMSUB="DIAGNOSTIC CODES file IEN issue @ "_RAFAC
SET XMTEXT="RATXT("
+46 ;send Vista email of problem to the patch installer
SET XMY(DUZ)=""
+47 ; Define Outlook mail group to receive email of problem
+48 SET XMY("VAOITVHITRadiologyFacilityLevelApplicationIssues@va.gov")=""
+49 NEW DIFROM
+50 DO ^XMD
DO BMES^XPDUTL(.RATXT)
+51 QUIT
End DoDot:1
GOTO ID
+52 ;
+53 ; Set up RAAA() for the Abdominal Aortic Aneurysm codes
+54 ;raaa(IEN file 78.3)=field .01^field 2^fields 3 and 4
+55 FOR RAI=1:1
SET RAX=$TEXT(AAACODE+RAI)
IF RAX=""
QUIT
Begin DoDot:1
+56 ;redefine RAX
SET RAX=$PIECE(RAX,";;",2)
+57 SET RA1=$PIECE(RAX,U,1)
SET RA2=$PIECE(RAX,U,2)
SET RA3=$PIECE(RAX,U,3)
+58 IF RA2=1
SET $PIECE(RAAA(RA1),U,1)=RA3
+59 IF RA2=2
SET $PIECE(RAAA(RA1),U,2)=RA3
+60 IF RA2=3
SET $PIECE(RAAA(RA1),U,3)=RA3
+61 QUIT
End DoDot:1
+62 ;
+63 ;Add the BI-RADS codes to file 78.3
+64 Begin DoDot:1
+65 SET RAI=0
FOR
SET RAI=$ORDER(RAD(RAI))
IF RAI=""
QUIT
Begin DoDot:2
+66 SET RAPA=$PIECE($PIECE(RAD(RAI),U,3),"CATEGORY ",2)
+67 ;categories 0,3,4,5,6 have alerts
+68 SET RAPAPG="n"
IF "^0^3^4^5^6^"[("^"_RAPA_"^")
SET RAPAPG="y"
+69 SET RAFDA(78.3,"+1,",.01)="BI-RADS "_$PIECE(RAD(RAI),U,3)
+70 SET RAFDA(78.3,"+1,",2)=$EXTRACT($PIECE(RAD(RAI),U,2),1,80)
+71 SET RAFDA(78.3,"+1,",3)=$$UP^XLFSTR(RAPAPG)
+72 SET RAFDA(78.3,"+1,",4)=RAPAPG
+73 SET RAFDA(78.3,"+1,",6)=$PIECE(RAD(RAI),U,1)
+74 SET RAIEN(1)=RAI
+75 DO UPDATE^DIE("","RAFDA","RAIEN","RAERR")
+76 IF $DATA(RAERR)#2
Begin DoDot:3
+77 SET RATXT(1)=""
SET RATXT(2)="Error adding "_$PIECE(RAD(RAI),U,3)_" to the"
+78 SET RATXT(3)="local DIAGNOSTIC CODES file #78.3."
DO BMES^XPDUTL(.RATXT)
End DoDot:3
+79 IF '$TEST
SET RACT=RACT+1
+80 KILL RAFDA,RAIEN,RAERR
+81 QUIT
End DoDot:2
+82 QUIT
End DoDot:1
+83 ;
+84 ; Add the AAA codes to file 78.3
+85 Begin DoDot:1
+86 SET RA1=0
FOR
SET RA1=$ORDER(RAAA(RA1))
IF RA1=""
QUIT
Begin DoDot:2
+87 SET RAPAPG=$PIECE(RAAA(RA1),U,3)
+88 SET RAFDA(78.3,"+1,",.01)=$PIECE(RAAA(RA1),U,1)
+89 SET RAFDA(78.3,"+1,",2)=$PIECE(RAAA(RA1),U,2)
+90 SET RAFDA(78.3,"+1,",3)=$$UP^XLFSTR(RAPAPG)
+91 SET RAFDA(78.3,"+1,",4)=RAPAPG
+92 SET RAIEN(1)=RA1
+93 DO UPDATE^DIE("","RAFDA","RAIEN","RAERR")
+94 IF $DATA(RAERR)#2
Begin DoDot:3
+95 SET RATXT(1)=""
+96 SET RATXT(2)="Error adding "_$PIECE(RAAA(RA1),U,1)_" to the"
+97 SET RATXT(3)="local DIAGNOSTIC CODES file #78.3."
DO BMES^XPDUTL(.RATXT)
End DoDot:3
+98 IF '$TEST
SET RACT=RACT+1
+99 KILL RAFDA,RAIEN,RAERR
End DoDot:2
End DoDot:1
+100 KILL RATXT
+101 SET RATXT(1)=""
+102 SET RATXT(2)="*** "_RACT_" of 10 BI-RADS and Abdominal Aortic Aneurysm codes"
+103 SET RATXT(3)="have been successfully added to the DIAGNOSTIC CODES file #78.3. ***"
+104 DO BMES^XPDUTL(.RATXT)
+105 ;put 3rd piece of ^RA(78.3,0) to highest value but under 999
+106 SET RA1=$ORDER(^RA(78.3,999),-1)
+107 SET $PIECE(^RA(78.3,0),U,3)=RA1
ID ;set Identifier "WRITE" node and insert "I"
+1 IF '$DATA(^DD(78.3,0,"ID","WRITE"))
Begin DoDot:1
+2 SET ^DD(78.3,0,"ID","WRITE")="D EN^DDIOL($$EN1^RABIRAD,"""",""?33"")"
+3 DO BMES^XPDUTL("*** Identifier ""WRITE"" has been added to file #78.3.")
End DoDot:1
+4 ; set "I" after file number in ^RA(78.3,0)
+5 SET RA1=$PIECE(^RA(78.3,0),U,2)
IF RA1=78.3
Begin DoDot:1
+6 SET $PIECE(^RA(78.3,0),U,2)=RA1_"I"
+7 DO BMES^XPDUTL("*** ""I"" has been inserted to ^RA(78.3,0).")
End DoDot:1
+8 QUIT
AAACODE ; Abdominal Aortic Aneurysm codes
+1 ;;1200^1^ABDOMINAL AORTIC ANEURYSM NOT PRESENT
+2 ;;1200^2^The maximum width of the infrarenal aorta is less than three centimeters.
+3 ;;1200^3^n
+4 ;;1201^1^ABDOMINAL AORTIC ANEURYSM PRESENT
+5 ;;1201^2^The maximum width of the infrarenal aorta is at least three centimeters.
+6 ;;1201^3^y
+7 ;;1202^1^DOES NOT SATISFY SCREEN FOR AAA
+8 ;;1202^2^Exam is not technically adequate for AAA screening.
+9 ;;1202^3^n
