Sub-Field: 68.23

Parent File	Name	Number	Package
LOAD/WORK LIST(#68.2)	PROFILE	68.23	Lab Service

Field #	Name	Loc	Type	Details
.01	PROFILE	0;1	FREE TEXT	INPUT TRANSFORM: `K:X[""""!($A(X)=45) X I $D(X) K:$L(X)>30!($L(X)<1) X` LAST EDITED: `JAN 29, 1984` HELP-PROMPT: `ANSWER MUST BE 1-30 CHARACTERS IN LENGTH` DESCRIPTION: Only ONE load or work list can exist at a time. But more than one profile can be defined to make "alternate" groupings of tests for the load/worklist which might be used on an infrequent or non-standard basis. CROSS-REFERENCE: `68.23^B` 1)= S ^LRO(68.2,DA(1),10,"B",$E(X,1,30),DA)="" 2)= K ^LRO(68.2,DA(1),10,"B",$E(X,1,30),DA)
1	TEST	1;0	POINTER Multiple #68.24	68.24 DESCRIPTION: These are the tests to be brought onto the load/work list from the accessions.
2	ACCESSION AREA	0;2	POINTER TO ACCESSION FILE (#68)	**********************REQUIRED FIELD********************** ACCESSION(#68) INPUT TRANSFORM: `S DIC("S")="I '$L($P(^(0),U,17))" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X` LAST EDITED: `JAN 06, 1992` DESCRIPTION: This is the default accession area to use to build the load/work list. SCREEN: `S DIC("S")="I '$L($P(^(0),U,17))"` EXPLANATION: `You can not select an accession area designated Work Area.`
2.1	UID VERIFICATION	0;3	SET	'0' FOR PROFILE ACCESSION AREA ONLY; '1' FOR ANY ACCESSION AREA; LAST EDITED: `FEB 26, 1998` HELP-PROMPT: `Select how verifying by UID will select accessions.` DESCRIPTION: `When verifying by Lab Universal Identifier (UID) the site can configure how accessions are selected.` If "PROFILE ACCESSION AREA ONLY" is selected then only those UIDs which are from the accession area designated for this profile can be selected. If "ANY ACCESSION AREA" is selected then a UID from any accession area can be selected. Note that an accession from a different area should have tests that would be in this editing profile.
2.2	STORE DUPLICATE COMMENTS	0;4	SET	'0' FOR NO; '1' FOR YES; LAST EDITED: `AUG 08, 2002` HELP-PROMPT: `Should duplicate comments be stored with results.` DESCRIPTION: `When the Laboratory result verifying software is processing comments associated with a load/work list result, this field determines how duplicate comments are processed. If set to "NO" (default if no value) then a comment` that matches a previously stored comment will not be stored with the result. If set to "YES" then the duplicate check is not performed and the comment is stored with the results irregardless if the comment already exists. Setting it to "YES" will allow the handling of multiple line comments which contain the same comment more than once and are still clinically significant.
2.3	DEFAULT REFERENCE LABORATORY	0;5	POINTER TO INSTITUTION FILE (#4)	INSTITUTION(#4) LAST EDITED: `APR 23, 2004` HELP-PROMPT: `Specify the default performing laboratory for this profile.` DESCRIPTION: The performing laboratory that is commonly associated with this profile. It will be presented as the default performing laboratory when a user is setting up a verifying session using this profile.
3	TRAY # FOR CONTROL	2;0	Multiple #68.25	68.25 DESCRIPTION: Enter the tray number appropriate for the controls you will next be choosing. If this is a worklist or sequence loadlist, the "tray" is always "1".
4	Specimen to EXCLUDE	3;0	POINTER Multiple #68.27	68.27 DESCRIPTION: If any specimens are specified here, accessions of these specimen(s) will NOT be included on the work/load list.
5	CONTROLS TO BEGIN WORKLIST	4;0	POINTER Multiple #68.28	68.28 DESCRIPTION: This multiple has the controls that are to be placed on the worklist at the beginning of the list.
6	CONTROLS TO END WORKLIST	5;0	POINTER Multiple #68.29	68.29 DESCRIPTION: This multiple has the controls that are to be blaced on the worklist at the end of the list.

Field #

Name

Loc

Type

Details

.01

PROFILE

0;1

FREE TEXT

INPUT TRANSFORM: K:X[""""!($A(X)=45) X I $D(X) K:$L(X)>30!($L(X)<1) X
LAST EDITED: JAN 29, 1984
HELP-PROMPT: ANSWER MUST BE 1-30 CHARACTERS IN LENGTH

DESCRIPTION:

Only ONE load or work list can exist at a time.  But more than one profile can be defined to make "alternate" groupings of tests for the load/worklist which might be used on an infrequent or non-standard basis.

CROSS-REFERENCE: 68.23^B

1)= S ^LRO(68.2,DA(1),10,"B",$E(X,1,30),DA)=""

2)= K ^LRO(68.2,DA(1),10,"B",$E(X,1,30),DA)

1

TEST

1;0

POINTER Multiple #68.24

68.24

DESCRIPTION:

These are the tests to be brought onto the load/work list from the accessions.

2

ACCESSION AREA

0;2

POINTER TO ACCESSION FILE (#68)

************************REQUIRED FIELD************************

ACCESSION(#68)

INPUT TRANSFORM: S DIC("S")="I '$L($P(^(0),U,17))" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
LAST EDITED: JAN 06, 1992

DESCRIPTION:

This is the default accession area to use to build the load/work list.

SCREEN: S DIC("S")="I '$L($P(^(0),U,17))"
EXPLANATION: You can not select an accession area designated Work Area.

2.1

UID VERIFICATION

0;3

SET

'0' FOR PROFILE ACCESSION AREA ONLY;
'1' FOR ANY ACCESSION AREA;

LAST EDITED: FEB 26, 1998
HELP-PROMPT: Select how verifying by UID will select accessions.

DESCRIPTION: When verifying by Lab Universal Identifier (UID) the site can configure how accessions are selected.

If "PROFILE ACCESSION AREA ONLY" is selected then only those UIDs which are from the accession area designated for this profile can be selected.

If "ANY ACCESSION AREA" is selected then a UID from any accession area can be selected. Note that an accession from a different area should have tests that would be in this editing profile.

2.2

STORE DUPLICATE COMMENTS

0;4

SET

'0' FOR NO;
'1' FOR YES;

LAST EDITED: AUG 08, 2002
HELP-PROMPT: Should duplicate comments be stored with results.

DESCRIPTION: When the Laboratory result verifying software is processing comments associated with a load/work list result, this field determines how duplicate comments are processed. If set to "NO" (default if no value) then a comment

that matches a previously stored comment will not be stored with the result.  If set to "YES" then the duplicate check is not performed and the comment is stored with the results irregardless if the comment already exists.

Setting it to "YES" will allow the handling of multiple line comments which contain the same comment more than once and are still clinically significant.

2.3

DEFAULT REFERENCE LABORATORY

0;5

POINTER TO INSTITUTION FILE (#4)

INSTITUTION(#4)

LAST EDITED: APR 23, 2004
HELP-PROMPT: Specify the default performing laboratory for this profile.

DESCRIPTION:

The performing laboratory that is commonly associated with this profile.  It will be presented as the default performing laboratory when a user is setting up a verifying session using this profile.

3

TRAY # FOR CONTROL

2;0

Multiple #68.25

68.25

DESCRIPTION:

Enter the tray number appropriate for the controls you will next be choosing.  If this is a worklist or sequence loadlist, the "tray" is always "1".

4

Specimen to EXCLUDE

3;0

POINTER Multiple #68.27

68.27

DESCRIPTION:

If any specimens are specified here, accessions of these specimen(s) will NOT be included on the work/load list.

5

CONTROLS TO BEGIN WORKLIST

4;0

POINTER Multiple #68.28

68.28

DESCRIPTION:

This multiple has the controls that are to be placed on the worklist at the beginning of the list.

6

CONTROLS TO END WORKLIST

5;0

POINTER Multiple #68.29

68.29

DESCRIPTION:

This multiple has the controls that are to be blaced on the worklist at the end of the list.

Customize PDF page

Package: Lab Service

LOAD/WORK LIST(#68.2)-->68.23

Sub-Field: 68.23

Information

Details