Global: ^LAB(62.4

The internal number for this auto instrument.  It ties the routines running on a line or data concentrator to this particular file for the rest of the information within the file.

The name of the instrument.

1)= S ^LAB(62.4,"B",$E(X,1,30),DA)=""

2)= K ^LAB(62.4,"B",$E(X,1,30),DA)

message downloads using Lab Universal Interface software.

This field should be used to pad accession numbers based on the fixed length entered for this instrument.

Indicate what method the system should use as a default value for workload identification purposes.

1)= K DIV S DIV=X,D0=DA,DIV(0)=D0 S Y(1)=$S($D(^LAB(62.4,D0,"SUF")):^("SUF"),1:"") S X=$P(Y(1),U,2),X=X S DIU=X K Y X ^DD(62.4,.14,1,1,1.1) X ^DD(62.4,.14,1,1,1.4)

1.1)= S X=DIV S X=$P(^LAB(64.2,DIV,0),U)

1.4)= S DIH=$S($D(^LAB(62.4,DIV(0),"SUF")):^("SUF"),1:""),DIV=X S $P(^("SUF"),U,2)=DIV,DIH=62.4,DIG=.15 D ^DICR:$O(^DD(DIH,DIG,1,0))>0

2)= K DIV S DIV=X,D0=DA,DIV(0)=D0 S Y(1)=$S($D(^LAB(62.4,D0,"SUF")):^("SUF"),1:"") S X=$P(Y(1),U,2),X=X S DIU=X K Y S X="" X ^DD(62.4,.14,1,1,2.4)

2.4)= S DIH=$S($D(^LAB(62.4,DIV(0),"SUF")):^("SUF"),1:""),DIV=X S $P(^("SUF"),U,2)=DIV,DIH=62.4,DIG=.15 D ^DICR:$O(^DD(DIH,DIG,1,0))>0

CREATE VALUE)= S X=$P(^LAB(64.2,DIV,0),U)

DELETE VALUE)= @

FIELD)= WKLD CODE METHOD NAME

1)= K DIV S DIV=X,D0=DA,DIV(0)=D0 S Y(1)=$S($D(^LAB(62.4,D0,"SUF")):^("SUF"),1:"") S X=$P(Y(1),U,3),X=X S DIU=X K Y X ^DD(62.4,.14,1,2,1.1) X ^DD(62.4,.14,1,2,1.4)

1.1)= S X=DIV S X=$P(^LAB(64.2,DIV,0),U,2)

1.4)= S DIH=$S($D(^LAB(62.4,DIV(0),"SUF")):^("SUF"),1:""),DIV=X S $P(^("SUF"),U,3)=DIV,DIH=62.4,DIG=.16 D ^DICR:$O(^DD(DIH,DIG,1,0))>0

2)= K DIV S DIV=X,D0=DA,DIV(0)=D0 S Y(1)=$S($D(^LAB(62.4,D0,"SUF")):^("SUF"),1:"") S X=$P(Y(1),U,3),X=X S DIU=X K Y S X="" X ^DD(62.4,.14,1,2,2.4)

2.4)= S DIH=$S($D(^LAB(62.4,DIV(0),"SUF")):^("SUF"),1:""),DIV=X S $P(^("SUF"),U,3)=DIV,DIH=62.4,DIG=.16 D ^DICR:$O(^DD(DIH,DIG,1,0))>0

CREATE VALUE)= S X=$P(^LAB(64.2,DIV,0),U,2)

DELETE VALUE)= @

FIELD)= WKLD CODE SUFFIX

This field is automatically filled in when a selection of wkld code method name is made. I represents an eye readable name of the code selected.

WRITE AUTHORITY:  ^

Indicate what suffix should be used as a default value for this instrument.

WRITE AUTHORITY:  ^

TRIGGERED by the WKLD METHOD field of the AUTO INSTRUMENT File

automated instrument which has gone through the data concentrating device

to the main computer back to the laboratory to indicate that all the data

lines are intact, and that the values are actually getting all the way

back to the computer.

manager and runs continuously.

WRITE AUTHORITY:  @

1)= S ^LAB(62.4,"C",$E(X,1,30),DA)=""

2)= K ^LAB(62.4,"C",$E(X,1,30),DA)

This points to the single worklist where processed data from the LA global is to be directed.

1)= I $P(^LAB(62.4,DA,0),U,6)="SEQN" S ^LRO(68.2,"AS",X,DA)=""

2)= K ^LRO(68.2,"AS",X,DA)

This is a line label in the LAGEN routine designating the entry point.

1)= I $P(^LAB(62.4,DA,0),U,4),X="SEQN" S ^LRO(68.2,"AS",$P(^(0),U,4),DA)=""

2)= I X="SEQN" K ^LRO(68.2,"AS",+$P(^LAB(62.4,DA,0),U,4),DA)

documentation on LAPX routine in technical manual.

If this field is set, then all input strings to the LA routine will be echoed to the echo device.  That is, all raw data from the instrument will be echoed before any cross-referencing is done.

This is the name of the method or instrument used.

1)= S ^LAB(62.4,"D",$E(X,1,30),DA)=""

2)= K ^LAB(62.4,"D",$E(X,1,30),DA)

This field contains the default accession list name for this instrument.  Points to FILE #68.

Setting this field to YES will cause a rerun of instrument data to overlay existing data.

There is a similar companion field at the test level which controls comments associated with tests results.

This is a string of executable code which is used whenever a new string of data starts to come from the automated instrument.

WRITE AUTHORITY:  @

restart itself.

WRITE AUTHORITY:  @

If the instrument requires a handshake response, this field contains the executable MUMPS code to set the response into the variable OUT.  eg.  S OUT=$C(6) (OUT contains the ASCII character 6 "ACK")

WRITE AUTHORITY:  @

This field contains the sequence used to acknowledge an auto instrument.  Not all instruments utilize this field.

Not all instruments make use of this field.

Where X= the ascii number of the ACK character.

This field is used when bypassing the LSI.  It is the name of the device that is used to communicate with a direct connect instrument.

This field is a free text pointer to the Device file.  It stores the free text name of the device.  The name is used in the ^LAPORTXX routine to set IOP before calling ^%ZIS.

passes, as well as inclusive of the tests the machine passes which had

not been ordered from the test panel for the patient.  It means, for

example, if the order was glucose, sodium, and a number of other tests,

but not the entire ASTRA panel, but the laboratory chooses to run on the

ASTRA, all the tests can be included in the verified data.  To exclude

large amounts of data, for example, the Hematrak passes distribution data

about the slide that it has examined, information which may or may not be

appropriate for the laboratory to pass on to the ward.

T or blank moves the data into the TC array.

U moves the data into the ^UTILITY("LA",$J, global.

N don't move at all.

The value will be returned in LALCT.

This is a multiple field.  It contains the names/numbers of devices which will report the status of the interface.

If you are not attempting to interface one these types of instruments, you may ignore this entire sub-field.

If you are attempting to interface such an instrument, there are examples available for various instruments.

Check FORUM for a current listing of instruments which are interfacable.

Notes on how to setup the instrument to run with the lab package, and other useful information on interfacing this instrument.

Enter the line tag of the routine used to down load data to the instrument.  DO NOT USE '^' ON THIS LINE TAG. IT WILL BE HANDLED BY THE PROCESSING ROUTINE.

WRITE AUTHORITY:  @

Enter the name of the routine used to down load data to the instrument.

WRITE AUTHORITY:  @

If it is necessary to build down load files for the instrument, enter the line Tag of the routine that builds the fields.

Enter the name of the routine used to build the down load files for this instrument.

This field will contain the default answer to the question, Send Tray/Cup location, used by some Bi-Directional routines.

This field contains the Default answer to Queue to build Question.

This field specifies how the data being processed should be handled.

1)= S:X ^LAB(62.4,"AE",DA,X)=""

2)= K ^LAB(62.4,"AE",DA)

User by LAB MESSAGING to determine if site is autodownloading test orders to lab auto instruments and which instruments to send to.

This is a statistical method name to be used by this instrument.  Example:  Bull Algorithm.  See for example the MANUAL BULL ALGOR. entry.  The entry usually would point to itself.

1)= S ^LAB(62.4,"AC",$E(X,1,30),DA)=""

2)= K ^LAB(62.4,"AC",$E(X,1,30),DA)

Expected mean value for Bull's algorithm for first of three results.  E.g., MCV on a blood count determination.

Expected mean value for Bull's algorithm for second of three results.  E.g., MCH on a blood count determination.

Expected mean value for Bull's algorithm for third of three results.  E.g., MCHC on a blood count determination.

The default is VS [Verify Supervisor] If one wants the reports to released and verified, enter VS. Other wise a supervisor must release the reports before being verified and printed to the cumulative.

Note. This field is associated with the field MICRO APPROVAL METHOD in Lab Reports file. Make sure they agree and are appropriate for your site.

THIS FIELD IS ONLY USED FOR MICROBIOLOGY AUTOMATED INSTRUMENTS.

The routine LAMIAUT0 set the default value of 'VS'.

This is the default laboratory test name to be used to record workload for each organism when using the automated Micro instrument to verify test.

Date of the note.