Global: ^LAB(60

This is the name of the Laboratory test you are defining in this entry.

1)= S ^LAB(60,"B",$E(X,1,40),DA)=""

2)= K ^LAB(60,"B",$E(X,1,40),DA)

1)= N TEST S TEST=DA N DA,DIE,DIC,DE,DW,DH,DS,DO,DD D UPD^LR7OV0(TEST)

2)= N TEST S TEST=DA N DA,DIE,DIC,DE,DW,DH,DS,DO,DD D UPD^LR7OV0(TEST)

Trigger update to CPRS.

Enter the cost of the test.

1)= N TEST S TEST=DA N DA,DIE,DIC,DE,DW,DH,DS,DO,DD D UPD^LR7OV0(TEST)

2)= N TEST S TEST=DA N DA,DIE,DIC,DE,DW,DH,DS,DO,DD D UPD^LR7OV0(TEST)

Trigger update to CPRS.

This is another name for the test.  It may be the locally preferred name, or a common misspelling.

only.

1)= N TEST S TEST=DA N DA,DIE,DIC,DE,DW,DH,DS,DO,DD D UPD^LR7OV0(TEST)

2)= N TEST S TEST=DA N DA,DIE,DIC,DE,DW,DH,DS,DO,DD D UPD^LR7OV0(TEST)

Trigger update to CPRS.

Cytology, AU for Autopsy.  This field is required for all orderable tests.

1)= N TEST S TEST=DA N DA,DIE,DIC,DE,DW,DH,DS,DO,DD D UPD^LR7OV0(TEST)

2)= N TEST S TEST=DA N DA,DIE,DIC,DE,DW,DH,DS,DO,DD D UPD^LR7OV0(TEST)

Trigger update to CPRS.

information from the data definition file for the result.

UNEDITABLE

1)= S ^LAB(60,"C",$E(X,1,30),DA)=""

2)= K ^LAB(60,"C",$E(X,1,30),DA)

This is the appropriate institution/division this test is performed at.

this field should be blank.

This field should be entered only if the test is never done on any other collection sample than the ONE designated in Select COLLECTION SAMPLE: The system will then not bother asking if the sample is the correct one.

This entry, for the given Laboratory Test, is THE collection sample brought back on routine phlebotomy collection by the lab when they make rounds on the wards.  If blank, the test CANNOT be ordered for routine collection.

This field should be YES if this is a mandatory test, i.e., if no data is reported, the default status is "pending".

Data Dictionary field in file 63.

WRITE AUTHORITY:  ^

UNEDITABLE

This is the SNOMED name or code of this test.

No longer used.  Will be deleted after this version.

If blank, the minimum number of labels (accounting for required volume) is generated.  Enter a positive number for extra copies, -1 if NO label is desired.

The highest urgency allowed must be stored here.  The smaller the number, the more urgent.

This specifies the default urgency status of this test.  It points to the URGENCY file.

Default test heading for cumulative results reports.  (May be different in LAB REPORTS file 64.5.)

1)= S ^LAB(60,"D",$E(X,1,30),DA)=""

2)= K ^LAB(60,"D",$E(X,1,30),DA)

Reserved for future use.

point.

This is the Pretty Print Routine (see next field) line entry point.  Some programs have more than one entry to give a "special" display.

If no entry is made, (and the test is type 'O'utput or 'B'oth), display output from the [LRGEN] menu option is a general cumulative.  With a program name here, [LRGEN] instead runs the alternate program for display.

This is the print order of the test within its accession area.

This field is used to map tests in file 60 to the VA National Lab codes found in file 64.

1)= S ^LAB(60,"AC",$E(X,1,30),DA)=""

2)= K ^LAB(60,"AC",$E(X,1,30),DA)

1)= S ^LAB(60,"AD",DA,$E(X,1,30))=""

2)= K ^LAB(60,"AD",DA,$E(X,1,30))

1)= N TEST S TEST=DA N DA,DIE,DIC,DE,DW,DH,DS,DO,DD D UPD^LR7OV0(TEST)

2)= N TEST S TEST=DA N DA,DIE,DIC,DE,DW,DH,DS,DO,DD D UPD^LR7OV0(TEST)

Trigger update to CPRS.

This is the workload procedure code associated with this test.  It is used in compiling laboratory workload statistics.

1)= S ^LAB(60,"AE",$P($G(^LAM(X,0)),U,2),DA)=""

2)= K ^LAB(60,"AE",$P($G(^LAM(X,0)),U,2),DA)

This MUMPS cross reference is used for sorting LABORATORY TEST entries by workload code number.  The format for the cross reference nodes is shown below.

^LAB(60,"AE",Workload Code Number,IEN)=""

This field is used to indicate that this entry is to be included in the Electronic Catalog.

Points to EXECUTE CODE file.

No longer used.  Will be deleted after 1/89.

At the time a test or panel of tests is reviewed, the execute code is run.

tests.

This may include any processing instructions pertinent to this test.

ENZYMES.

Enter the appropriate collection sample(s) for standard processing in the lab.  These are the common names that the phlebotomists and ward personnel would recognize.  The first entry is the "default" collection sample.

Text to be seen by the ward each time the test is ordered regardless of the type of collection sample.

Points to EXECUTE CODE file.

excluded.

1)= K DIV S DIV=X,D0=DA,DIV(0)=D0 S Y(1)=$S($D(^LAB(60,D0,0)):^(0),1:"") S X=$P(Y(1),U,5) S DIU=X K Y X ^DD(60,400,1,1,1.1) X ^DD(60,400,1,1,1.4)

1.1)= S X=DIV S X="CH;"_$P(^DD(63.04,DIV,0),"^",4)

1.4)= S DIH=$S($D(^LAB(60,DIV(0),0)):^(0),1:""),DIV=X X "F %=0:0 Q:$L($P(DIH,U,4,99))  S DIH=DIH_U" S %=$P(DIH,U,6,999),^(0)=$P(DIH,U,1,4)_U_DIV_$S(%]"":U_%,1:""),DIH=60,DIG=5 D ^DICR:$O(^DD(DIH,DIG,1,0))>0

2)= K DIV S DIV=X,D0=DA,DIV(0)=D0 S Y(1)=$S($D(^LAB(60,D0,0)):^(0),1:"") S X=$P(Y(1),U,5) S DIU=X K Y S X=DIV S X="" X ^DD(60,400,1,1,2.4)

2.4)= S DIH=$S($D(^LAB(60,DIV(0),0)):^(0),1:""),DIV=X X "F %=0:0 Q:$L($P(DIH,U,4,99))  S DIH=DIH_U" S %=$P(DIH,U,6,999),^(0)=$P(DIH,U,1,4)_U_DIV_$S(%]"":U_%,1:""),DIH=60,DIG=5 D ^DICR:$O(^DD(DIH,DIG,1,0))>0

CREATE VALUE)= S X="CH;"_$P(^DD(63.04,DIV,0),"^",4)

DELETE VALUE)= @

FIELD)= LOCATION

1)= K DIV S DIV=X,D0=DA,DIV(0)=D0 S Y(1)=$S($D(^LAB(60,D0,0)):^(0),1:"") S X=$P(Y(1),U,12) S DIU=X K Y X ^DD(60,400,1,2,1.1) X ^DD(60,400,1,2,1.4)

1.1)= S X=DIV S X="DD(63.04,"_DIV_","

1.4)= S DIH=$S($D(^LAB(60,DIV(0),0)):^(0),1:""),DIV=X X "F %=0:0 Q:$L($P(DIH,U,11,99))  S DIH=DIH_U" S %=$P(DIH,U,13,999),^(0)=$P(DIH,U,1,11)_U_DIV_$S(%]"":U_%,1:""),DIH=60,DIG=13 D ^DICR:$O(^DD(DIH,DIG,1,0))>0

2)= K DIV S DIV=X,D0=DA,DIV(0)=D0 S Y(1)=$S($D(^LAB(60,D0,0)):^(0),1:"") S X=$P(Y(1),U,12) S DIU=X K Y S X=DIV S X="" X ^DD(60,400,1,2,2.4)

2.4)= S DIH=$S($D(^LAB(60,DIV(0),0)):^(0),1:""),DIV=X X "F %=0:0 Q:$L($P(DIH,U,11,99))  S DIH=DIH_U" S %=$P(DIH,U,13,999),^(0)=$P(DIH,U,1,11)_U_DIV_$S(%]"":U_%,1:""),DIH=60,DIG=13 D ^DICR:$O(^DD(DIH,DIG,1,0))>0

CREATE VALUE)= S X="DD(63.04,"_DIV_","

DELETE VALUE)= @

FIELD)= FIELD

Computed field.

Computed field.

This number should be zero to nine. This number is appended to the front of the accession number.

If there is no entry in this field, this test will not be downloaded.

the test/procedure are entered here.

This subfile holds the WKLD codes to be credited during the accession process.

Note: None of the suffixes are changed in this sub file. Only those WKLD codes found in the verification WKLD code sub file have the potential to have the suffix changed.

This field is not longer used by AMIS/WORKLOAD. It will be made obsolete with V5.2 and will be deleted in later release. Consult the section on workload in your implementation guide.

NO --- A NULL ANSWER MEANS YES

This field is used by Clinical Information System such as those found in MICU. This field is not used with the laboratory package it self but is a special field for interface with external system computer systems.

This is the date of this particular note.

the NATIONAL VA LAB CODE (#64) field, then the CPT in this field is the default.

codes that describe procedures and tests. CPT codes are developed and maintained by the AMA with annual updates. Level II (national) codes are five digit alpha numeric codes that describe pharmaceuticals, supplies,

procedures, tests and services. Level II codes are developed and maintained by CMS with quarterly updates. Level III (local) codes are five digit alpha numeric codes that are being phased out by the fiscal intermediaries.

purposes as a bundled panel.

If this field is set to 'No', the panel will be unbundled into it's individual atomic tests and the CPT codes for those atomic tests will be sent to PCE for billing purposes.

Note: This field is only functional for a panel test. This field is ignored for an atomic test.

Refer to the Clinical Indicator Data Capture (CIDC) implementation guide for further instruction for managing this field.

When set to Yes this lab test will NOT display on the Health Summary if the value is null, and this is an atomic test.  Panels do not use this flag.

not want ALL of the tests to display.  This is especially true with tests like wbc casts in a urinalysis panel or ovalocytes in a CBC panel that has no result associated with the panel.