Global: ^PS(59.7

FileMan FileNo	FileMan Filename	Package
59.7	PHARMACY SYSTEM	Pharmacy Data Management

Package	Total	Routines
Outpatient Pharmacy	44	D/C ON SERVICE TRANSFER EXEMPT WARD FROM AUTOCANCEL PBM AR/WS AOU MAPPINGS PBM CS NAOU MAPPINGS PBM DA PHARM LOC MAPPINGS PSO293PI PSOATRF PSOATRFC PSOAUTOC PSOCSRL PSODISP PSODISP1 PSODISP3 PSODISPS PSODIV PSOHLDIS PSOHLDS2 PSOHLEXP PSOHLUP1 PSOLLL7 PSOLSET PSOMAUEX PSOP PSOPOST PSOREJP3 PSORXCLE PSORXDL PSOSD1 PSOSD2 PSOSD3 PSOSITED PSOSPSIG PSOSTART PSOSUDEL PSOTALK PSOTALK3 PSOTEXP1 PSOTRLBL PSOUTLA1 SCRIPTALK PRINT DEVICE MAPPING TO SERVICE TO WARD WARD ACTIONS ^PS(51.1
Pharmacy Data Management	44	PSS59P7 PSSADDIT PSSCHENV PSSCHPRE PSSCHPST PSSCREAT PSSCSPD PSSDDUT2 PSSDEE PSSDEE1 PSSDELOI PSSDOS PSSDOSCR PSSDOSER PSSENV PSSENVN PSSFIL PSSFILED PSSHL1 PSSJORDF PSSJXR17 PSSLOOK PSSMATCH PSSOICT PSSPOID3 PSSPOIKA PSSPOIM1 PSSPOIM2 PSSPOIMN PSSPOIMO PSSPOST PSSPOST2 PSSPRE PSSPRE38 PSSREMCH PSSUTIL PSSUTLPR PSSUTLPZ PSSVIDRG ^PS(55 ^PS(59.7 ^PSDRUG PSSWRNA PSSWRNE
Inpatient Medications	41	D/C ON SERVICE TRANSFER EXEMPT WARD FROM AUTOCANCEL PBM AR/WS AOU MAPPINGS PBM CS NAOU MAPPINGS PBM DA PHARM LOC MAPPINGS PSGBRJ PSGFILD0 PSGMAR0 PSGMMAR0 PSGMMAR3 PSGOE7 PSGOER PSGOETO PSGPEN PSGPL PSGPLDP PSGPLPRG PSGPLR PSGPLUP0 PSGSET PSGTAP PSGTAP0 PSGTAP1 PSJ005 PSJADT PSJADT1 PSJDCU PSJHL4A PSJIPST PSJIPST2 PSJIPST3 PSJPRE4I PSJPRE4P PSJUTL1 PSJXR512 SCRIPTALK PRINT DEVICE MAPPING TO SERVICE TO WARD WARD ACTIONS ^PS(50.8 ^PS(57.5
National Drug File	22	D/C ON SERVICE TRANSFER EXEMPT WARD FROM AUTOCANCEL PBM AR/WS AOU MAPPINGS PBM CS NAOU MAPPINGS PBM DA PHARM LOC MAPPINGS PSN4POST PSNAUTO PSNBLD PSNDRUG PSNHELP PSNMRG PSNNDC PSNNDC1 PSNPPIO PSNPPIP PSNPRE PSNSTCL SCRIPTALK PRINT DEVICE MAPPING TO SERVICE TO WARD WARD ACTIONS ^PS(51.2
Auto Replenishment Ward Stock	15	D/C ON SERVICE TRANSFER EXEMPT WARD FROM AUTOCANCEL PBM AR/WS AOU MAPPINGS PBM CS NAOU MAPPINGS PBM DA PHARM LOC MAPPINGS PSGWAR PSGWPOST PSGWPRE1 PSGWSET PSGWUAS SCRIPTALK PRINT DEVICE MAPPING TO SERVICE TO WARD ^PS(59.4 WARD ACTIONS
IHS Changes To Pharmacy	10	APSBSNOD APSPAUTO APSPEC15 APSPFNC3 APSPOST3 APSPOST4 APSPOST5 APSPOST7 APSPRESK APSPRIS
CMOP	5	PSXBLD PSXBLD1 PSXMISC1 PSXRTRAN PSXRXQU
Integrated Billing	3	IBAUTL IBTRKR3 IBTRKR31
Pharmacy Benefits Management	3	PSUAR1 PSUMAP0 PSUPR2
Controlled Substances	2	PSDIPOS1 PSDOPT0
Drug Accountability	2	PSAUNL PSAWARD
General Medical Record - Vitals	2	GMRV SCHED FILE DISP GMRV SCHED FILE EDIT
Health Summary Components	1	BHSPSO7A
IHS VA Utilities	1	XBEHRCK
Lab Service	1	LRXOS0
Medicine	1	MCPSOP

Package	Total	Routines
Outpatient Pharmacy	4	PSO293P1 PSO293PI PSOHLNE2 PSOTALK3
Pharmacy Data Management	4	PSSFIL PSSFILED PSSJEEU PSSYSP
IHS Changes To Pharmacy	3	APSEPPIM APSPOST3 APSPSITE
Drug Accountability	2	PSAUNL PSAWARD
Inpatient Medications	2	PSGFILD0 PSGFILED
Auto Replenishment Ward Stock	1	PSGWUAS
Controlled Substances	1	PSDIPOS1
Pharmacy Benefits Management	1	PSUMAP0

Package	Total	FileMan Files
Mental Health Social Services	1	MHSS SITE PARAMETERS(#9002013)[.34]

Package	Total	FileMan Files
Auto Replenishment Ward Stock	2	INPATIENT SITE(#59.4)[20.4] PHARMACY AOU STOCK(#58.1)[#59.79001(.01)]
Inpatient Medications	2	NON-VERIFIED ORDERS(#53.1)[20.14, 20.404] INPATIENT WARD PARAMETERS(#59.6)[20.6]
Kernel	2	DEVICE(#3.5)[13, #59.747(.01), #59.747(.02)] NEW PERSON(#200)[20.3, 63.53, 70.1, 94]
Pharmacy Data Management	2	PHARMACY PATIENT(#55)[20.8, 30.2] DRUG(#50)[10.1, 70]
Registration	2	MEDICAL CENTER DIVISION(#40.8)[#59.79001(.02), #59.79002(.02), #59.79003(.02)] WARD LOCATION(#42)[#59.701(.01), #59.722(.01), #59.7221(.01)]
Drug Accountability	1	DRUG ACCOUNTABILITY STATS(#58.8)[#59.79002(.01), #59.79003(.01)]
Outpatient Pharmacy	1	OUTPATIENT SITE(#59)[40, 40.13, #59.79001(.03), #59.79002(.03), #59.79003(.03)]

Field #	Name	Loc	Type	Details
.01	SITE NAME	0;1	FREE TEXT	**********************REQUIRED FIELD********************** INPUT TRANSFORM: `K:$L(X)>40!($L(X)<1) X S:$D(X) DINUM=1` LAST EDITED: `JUL 28, 1989` HELP-PROMPT: `Answer must be 1-40 characters in length.` DESCRIPTION: This is the name of the site using the pharmacy packages. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSO` NOTES: `XXXX--CAN'T BE ALTERED EXCEPT BY PROGRAMMER` CROSS-REFERENCE: `59.7^B` 1)= S ^PS(59.7,"B",$E(X,1,30),DA)="" 2)= K ^PS(59.7,"B",$E(X,1,30),DA)
10	NDF VERSION	10;1	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>10!($L(X)<1) X` LAST EDITED: `JUN 21, 1989` HELP-PROMPT: `Answer must be 1-10 characters in length.` DESCRIPTION: This is the version of National Drug File installed. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSN`
10.1	LAST DRUG CONVERTED	10;4	POINTER TO DRUG FILE (#50)	DRUG(#50) LAST EDITED: `JUL 23, 1998` DESCRIPTION: This field holds the IEN of the last entry in file 50 which has been converted to the new version 4 value. It can be used for restart.
10.2	V4 CONVERSION COMPLETED	10;5	SET	'1' FOR YES; LAST EDITED: `JUL 23, 1998` DESCRIPTION: This field is set to 1 when the third piece of the ND node in file 50 has been converted to the new version 4 value for all drugs.
11	RESTART NUMBER	10;2	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>999999)!(X<1)!(X?.E1"."1N.N) X` LAST EDITED: `OCT 17, 1991` HELP-PROMPT: `Type a Number between 1 and 999999, 0 Decimal Digits` DESCRIPTION: In the event that the Post-Init does not run to completion, the number in the local drug file that was last converted is saved in this field. This number is used to restart the Post-Init conversion process. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSN`
12	CONVERSION REMATCH OPTION DONE	10;3	SET	'1' FOR YES; '0' FOR NO; LAST EDITED: `OCT 17, 1991` DESCRIPTION: This field is used to check to see if the Conversion Rematch option has done if there are entries to be converted. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSN`
13	PMIS PRINTER	10;6	POINTER TO DEVICE FILE (#3.5)	DEVICE(#3.5) LAST EDITED: `DEC 03, 1998` HELP-PROMPT: `This printer will be used as the default for the printing of Patient Medication Instruction Sheets (PMIS).` DESCRIPTION: `This field will be used to designate a default printer for the printing of Patient Medication Instruction Sheets (PMIS). This default can be changed during the actually printing of the PMIS. If no value is found, the user` will be prompted with a printer device.
14	PMIS LANGUAGE	10;7	SET	'1' FOR English; '2' FOR Spanish; LAST EDITED: `APR 06, 2000` HELP-PROMPT: `This language will be used as the default for the printing of Patient Medication Instruction Sheets (PMIS).` DESCRIPTION: `This field will be used to designate a default language for the printing of Patient Medication Instruction Sheets (PMIS). This default can be changed during the actually printing of the PMIS. If no value is found, the user` will be prompt to select a language.
15	PMIS SECTION DELETE	10;8	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>30!($L(X)<1) X` LAST EDITED: `FEB 03, 2003` HELP-PROMPT: `Enter the section label(s) to be excluded from the PMI print on Outpatient labels. If more than one section is to be deleted, enter the labels separated by commas.` DESCRIPTION: `The purpose of this field is to define the section(s) of the Patient Medication Information (PMI) to be excluded when printing Outpatient labels. If more than one section is to be deleted, the label(s) should be separated` by commas. For example: R,Z to exclude the STORAGE and DISCLAIMER sections. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^
16	WARNING LABEL SOURCE	10;9	SET	'N' FOR NEW; LAST EDITED: `APR 09, 2004` HELP-PROMPT: `Enter "N" for NEW to use commercial data source for warning labels.` DESCRIPTION: An "N" in this field indicates that the new commercial source for warning labels will be used. TECHNICAL DESCR: `If there is an "N" for "New" in this field, the commercial data source for warning labels from the WARNING LABEL-ENGLISH (#50.625) or WARNING LABEL-SPANISH (#50.626) will be used to print the warning labels. Otherwise,` the old RX CONSULT file (#54) warning labels will be used.
16.1	CMOP WARNING LABEL SOURCE	10;10	SET	'N' FOR NEW; LAST EDITED: `SEP 17, 2006` HELP-PROMPT: `Enter "N" for NEW to use commercial data source for CMOP warning labels.` DESCRIPTION: An "N" for "New" in this field indicates that the new commercial source for warning labels will be used for CMOP. TECHNICAL DESCR: `If there is an "N" for "New" in this field, the commercial data source for warning labels from the WARNING LABEL-ENGLISH (#50.625) file or WARNING LABEL-SPANISH (#50.626) file will be sent to CMOP. Otherwise, warnings from` the old RX CONSULT (#54) file are sent.
16.2	OPAI WARNING LABEL SOURCE	10;11	SET	'N' FOR NEW; LAST EDITED: `SEP 17, 2006` HELP-PROMPT: `Enter "N" for NEW to use commercial data source for OPAI warning labels.` DESCRIPTION: An "N" for "New" in this field indicates that the new commercial source for warning labels will be used for OPAI. TECHNICAL DESCR: `If there is an "N" for "New" in this field, the commercial data source for warning labels from the WARNING LABEL-ENGLISH (#50.625) file or WARNING LABEL-SPANISH (#50.626) file will be sent to the Outpatient Pharmacy` Automation Interface (OPAI). Otherwise, warnings from the old RX CONSULT (#54) file are sent.
20.01	*IV STATS/200 CONVERSION STATU	20;10	SET	'0' FOR NOT YET STARTED; '1' FOR MOVING CONVERTED DATA TO UTILITY; '2' FOR MOVING CONVERTED DATA BACK TO 50.8; '3' FOR COMPLETED; LAST EDITED: `DEC 01, 1994` DESCRIPTION: This is the status of the process that converts the providers in the IV STATS file (50.8) from the PROVIDER file (6) to the NEW PERSON file (200). TECHNICAL DESCR: This flag is set by the routine PSJC200 as part of the post-init process. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^
20.1	VERSION NUMBER LAST INITS RUN	20;1	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>999.99)!(X<.01)!(X?.E1"."3N.N) X` LAST EDITED: `SEP 10, 1989` HELP-PROMPT: `Type a Number between .01 and 999.99, 2 Decimal Digits.` DESCRIPTION: This is the version number of the last inits run for the Inpatient Medications package. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJI`
20.11	*NEW PERSON CONVERSION DATE	20;11	DATE	INPUT TRANSFORM: `S %DT="ESTX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `DEC 01, 1994` DESCRIPTION: This is the date and time that the Inpatient post-init process completed the conversion of it's data for the Provider file (6) to the New Person file (200). TECHNICAL DESCR: `This is used and set by the routine PSJC200. If there a date here, the conversion will not run. If the conversion does run, the date and time it completes is entered here. This allows the sites to rerun the inits if` necessary without the conversion running again (which would corrupt the data). DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.12	PRIMARY DRUG CONVERSION DATE	20;12	DATE	INPUT TRANSFORM: `S %DT="ESTXR" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JAN 08, 1992` HELP-PROMPT: `Answer must be 1-45 characters in length.` DESCRIPTION: This is the date the Primary Drug manual create process was completed. This should not be set through VA FileMan. TECHNICAL DESCR: `This is the date the Primary Drug manual create process was completed. This is automatically set once a user has completed the process, and should not be edited through the VA FileMan. The version 4 Inpatient` Medications inits cannot be run until the manual create process has been completed and this date has been set. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.13	DATE V4 PRE-PACKET INSTALLED	20;13	DATE	INPUT TRANSFORM: `S %DT="ESTXR" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JUL 30, 1991` DESCRIPTION: This is the date and time the Inpatient Medications version 4 pre-release packet was installed at this site. TECHNICAL DESCR: `Inpatient Medications version 4 will not install unless the pre-release packet has already been installed. When the pre-release packet is installed, it enters the date and time it was installed here. The version 4` installation will check here to see if the pre-release packet has been installed. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.14	*LAST N-V ORDER CONVERTED TOV4	20;14	POINTER TO NON-VERIFIED ORDERS FILE (#53.1)	NON-VERIFIED ORDERS(#53.1) LAST EDITED: `DEC 01, 1994` DESCRIPTION: `This is the last Non-Verified order converted for use with version 4 of the Inpatient Medications package. THIS SHOULD NOT BE EDITED. Editing this could cause corrupted data and possibly cause medication administration` errors. TECHNICAL DESCR: `This is used by the Inpatient Medications to keep track the entries in the Non-Verified Orders file that are converted to the New Person file and Primary Drug. This allows the post-init conversion proces to be restarted` in case of an abort. It is set in PSJIPST0. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.15	*DATE NON-VERIFIED CONVERTED	20;15	DATE	INPUT TRANSFORM: `S %DT="ESTX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `DEC 01, 1994` DESCRIPTION: This is the date and time that the Inpatient Medication conversion process completed converting the Non-Verified Orders file to the New Person file and Primary Drug. It should not be set by a user. TECHNICAL DESCR: `This is the date and time that the Inpatient Medications version 4 post-init process completed converting the Non-Verified Orders file to use the New Person file and Primary Drug. This allows the inits to be run again` without corrupting the data in the Non-Verified Orders file. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.16	ORDERABLE ITEM CONVERSION DATE	20;16	DATE	INPUT TRANSFORM: `S %DT="ESTX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `MAR 16, 1995` HELP-PROMPT: `Date/Time Pharmacy Orderable Item pre-release options have completed.`
20.2	DATE INITS LAST RUN	20;2	DATE	INPUT TRANSFORM: `S %DT="ESTXR" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `SEP 10, 1989` DESCRIPTION: This is the date and time the inits were last run for the Inpatient Medications package. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.3	USER TO LAST RUN INITS	20;3	POINTER TO NEW PERSON FILE (#200)	NEW PERSON(#200) LAST EDITED: `JUL 08, 1991` DESCRIPTION: This is the user who last ran the inits for the Inpatient Medications package. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.4	SITE FOR BACKGROUND JOB	20;4	POINTER TO INPATIENT SITE FILE (#59.4)	INPATIENT SITE(#59.4) LAST EDITED: `MAR 12, 1991` HELP-PROMPT: `Enter an Inpatient site whose parameters will be used by the background jobs.` DESCRIPTION: `The Inpatient Medications package has background jobs that run everyday. If an Inpatient site is entered here, the background jobs site's parameters to determine such things as if labels should be created whenever a` patient's orders are discontinued due to discharge. PLEASE NOTE that if a site has not been entered here, the background jobs will search through ALL of the Inpatient sites, and if one has labels turned on, will create labels. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.401	UD STATS/200 CONVERSION MARKER	20.4;1	DATE	INPUT TRANSFORM: `S %DT="EX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `MAR 03, 1992` DESCRIPTION: This is the last date in the Unit Dose Pick List Stats file that was converted from the Provider file to the New Person file. TECHNICAL DESCR: `This is a flag set by the routine PSJIPST2 as part of the post-init process. PSJIPST2 converts the Inpatient stats files from the Provider file to the New Person file. This flag contains the last date from the Unit` Dose Pick Lists Stats file (57.6) that was converted. This allows the post-init to be restarted, if neccessary, from where it was stopped without degrading the data. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.402	IV STATS/200 CONVERSION STATUS	20.4;2	SET	'0' FOR NOT YET STARTED; '1' FOR MOVING CONVERTED DATA TO UTILITY; '2' FOR MOVING CONVERTED DATA BACK TO 50.8; '3' FOR COMPLETED; LAST EDITED: `JUL 01, 1991` DESCRIPTION: This is the status of the process that converts the providers in the IV STATS file (50.8) from the PROVIDER file (6) to the NEW PERSON file (200). TECHNICAL DESCR: This flag is set by the routine PSJC200 as part of the post-init process. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^
20.403	NEW PERSON CONVERSION DATE	20.4;3	DATE	INPUT TRANSFORM: `S %DT="ESTX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JUN 20, 1991` DESCRIPTION: This is the date and time that the Inpatient post-init process completed the conversion of it's data for the Provider file (6) to the New Person file (200). TECHNICAL DESCR: `This is used and set by the routine PSJC200. If there a date here, the conversion will not run. If the conversion does run, the date and time it completes is entered here. This allows the sites to rerun the inits if` necessary without the conversion running again (which would corrupt the data). DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.404	LAST N-V ORDER CONVERTED TO V4	20.4;4	POINTER TO NON-VERIFIED ORDERS FILE (#53.1)	NON-VERIFIED ORDERS(#53.1) LAST EDITED: `OCT 16, 1991` DESCRIPTION: `This is the last Non-Verified order converted for use with version 4 of the Inpatient Medications package. THIS SHOULD NOT BE EDITED. Editing this could cause corrupted data and possibly cause medication administration` errors. TECHNICAL DESCR: `This is used by the Inpatient Medications to keep track the entries in the Non-Verified Orders file that are converted to the New Person file and Primary Drug. This allows the post-init conversion proces to be restarted` in case of an abort. It is set in PSJIPST0. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.405	DATE NON-VERIFIED CONVERTED	20.4;5	DATE	INPUT TRANSFORM: `S %DT="ESTX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `AUG 08, 1991` DESCRIPTION: This is the date and time that the Inpatient Medication conversion process completed converting the Non-Verified Orders file to the New Person file and Primary Drug. It should not be set by a user. TECHNICAL DESCR: `This is the date and time that the Inpatient Medications version 4 post-init process completed converting the Non-Verified Orders file to use the New Person file and Primary Drug. This allows the inits to be run again` without corrupting the data in the Non-Verified Orders file. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.406	LAST PAT CONVERTED FOR VER 4	20.4;6	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>999999999)!(X<0)!(X?.E1"."1N.N) X` LAST EDITED: `OCT 14, 1991` HELP-PROMPT: `Type a Number between 0 and 999999999, 0 Decimal Digits.` DESCRIPTION: `This is used by the version 4 post-inits of the Inpatient Medications package to keep track of the patients whose orders have been converted to the New Person file and Primary Drug.` THIS IS FOR USE ONLY BY THE POST-INITS, AND SHOULD NOT BE EDITED THROUGH VA FILEMAN. TECHNICAL DESCR: `This is used by the routine PSJIPST0 to keep track of the last patient whose orders have been converted to the New Person file and Primary Drug, to allow the inits to be rerun if necessary. This is for version 4 of the` Inpatient Medications package. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.407	LAST PICK LIST TO PD MARKER	20.4;7	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>999999)!(X<1)!(X?.E1"."1N.N) X` LAST EDITED: `JAN 06, 1992` HELP-PROMPT: `Type a Number between 1 and 999999, 0 Decimal Digits` DESCRIPTION: This is the last pick list converted by the Inpatient Medications version 4 init process. TECHNICAL DESCR: This is a marker created by conversion process started by the Inpatient Medications version 4 init process. This allows the coversion process to be restarted if necessary. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.408	DATE PICK LISTS CONVERT TO PD	20.4;8	DATE	INPUT TRANSFORM: `S %DT="ESTX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JAN 06, 1992` DESCRIPTION: This is the date and time that a conversion process started by the Inpatient Medications version 4 inits completed converting the Unit Dose pick lists to use Primary Drug. TECHNICAL DESCR: `This is set when the process that converts the Unit DOse pick lists to use Primary Drug has completed. The conversion is started by the Inpatient Medications post-init process. This allows the inits to be re-run` without re-running the conversion. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJU`
20.409	ORDER SET CONVERSION MARKER	20.4;9	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>13!($L(X)<3)!'(X?1.6N1";"1.6N) X` LAST EDITED: `JAN 08, 1992` HELP-PROMPT: `Answer must be 3-13 characters in length.` DESCRIPTION: This is the last entry in the Order Set file (53.2) to be converted to primary drug along with the last order within that entry to be converted. TECHNICAL DESCR: `This is used by the post-int process as a 'marker' when converting the Order Set file (53.2) to use primary drugs. It is in the form of: 53.2 entry number_";"_entry number of order within order set. Used by the routine` PSJIPST3. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.41	ORDER SET CONVERSION DATE	20.4;10	DATE	INPUT TRANSFORM: `S %DT="ESTXR" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JAN 08, 1992` DESCRIPTION: `This is the date and time the post-init process completed the conversion of the Unit Dose Order Sets for use with Primary Drug. If the inits are rerun and the post-inits find a date here, the conversion will not be` attempted. This should only be set by the post-inits, and not edited through VA FileMan. TECHNICAL DESCR: This is the date and time that the post-init process completed the conversion of the Unit Dose Order Sets to use Primary Drug. This is accessed in the routine PSJIPST and set in the routine PSJIPST3. DELETE AUTHORITY: ^ GROUP: `PSJ`
20.411	DATE UD STATS FILE CONVERTED	20.4;11	DATE	INPUT TRANSFORM: `S %DT="ESTX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `MAR 03, 1992` DESCRIPTION: This is the date the Unit Dose Pick List Stats file was converted from the Provider file to the New person file. TECHNICAL DESCR: `This is the date the Unit Dose Pick List Stats file was converted from the Provider file to the New Person file. It is set by the routine PSJIPST2. This allows the inits to run again without degrading the data in the` file. GROUP: `PSJ`
20.5	DATE ATC DATA CONVERTED	20;5	DATE	INPUT TRANSFORM: `S %DT="ETX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `MAR 12, 1991` HELP-PROMPT: `Enter date ATC data was converted.` DESCRIPTION: This is the date the site's ATC 212 data was converted for use with multiple machines. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.6	DEFAULT WARD	20;6	POINTER TO INPATIENT WARD PARAMETERS FILE (#59.6)	INPATIENT WARD PARAMETERS(#59.6) LAST EDITED: `JUL 30, 1991` HELP-PROMPT: `Enter the Inpatient Ward whose parameters are to be used whenever a patient is accessed who is not currently an inpatient.` DESCRIPTION: This is the entry in the Inpatient Ward Parameter file that is used by the Inpatient Medications package whenever a patient is accessed who is not an inpatient at that time. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.8	LAST PATIENT CONVERTED TO V4	20;8	POINTER TO PHARMACY PATIENT FILE (#55)	PHARMACY PATIENT(#55) LAST EDITED: `OCT 16, 1991` DESCRIPTION: `This the last pharmacy patient whose verified Unit Dose orders were converted for use with version 4 of the Inpatient Medications package. THIS FIELD SHOULD NOT BE EDITED! Editing this field could result in corrupted` data which could cause medication administration errors. TECHNICAL DESCR: `This is set by the routine PSJIPST0, which converts all Pharmacy Patients' active Unit Dose orders to the New Person file and Primary Drug. After a patient's orders have been converted, the patient is entered here.` This allows the process to be restarted, if necessary. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
20.9	UD STATS/200 CONVERSION STATUS	20;9	SET	'0' FOR NOT YET STARTED; '1' FOR MOVING CONVERTED DATA TO UTILITY; '2' FOR MOVING CONVERTED DATA BACK TO 57.6; '3' FOR COMPLETED; LAST EDITED: `JUL 01, 1991` DESCRIPTION: This is the status of the process that converts the providers in the UNIT DOSE PICK LIST STATS (57.6) from the PROVIDER file (6) to the NEW PERSON file (200). TECHNICAL DESCR: `This flag is set by the routine PSJC200 as part of the post-init process. PSJC200 converts the all of the Inpatient Medication data from the PROVIDER file (6) to the NEW PERSON file (200). This flag allows the process` to be run again if necessary without corrupting the data in the UNIT DOSE PICK LIST STATS file (57.6). DELETE AUTHORITY: ^ WRITE AUTHORITY: ^
21	NON-FORMULARY MESSAGE	21;0	WORD-PROCESSING #59.721	DESCRIPTION: `This is a message that will be shown to non-pharmacists when they order drugs for a patient that are not currently stocked by the pharmacy. This is typically a warning and/or a procedure the non-pharmacist must follow` before pharmacy will dispense the non-formulary drug. This message will show exactly as entered here. TECHNICAL DESCR: `This allows the pharmacy to provide a message to non-pharmacy personnel when they order a non-formulary drug for a patient. The message usually outlines the procedure that the user needs to follow before pharmacy will` dispense the non-formulary drug. GROUP: `PS`
22	WARD ACTIONS	22;0	POINTER Multiple #59.722	59.722 DESCRIPTION: These are the actions that the Inpatient Medications will take on a patient's order whenever the patient is transferred between wards. TECHNICAL DESCR: `This allows the site to determine if a patient's orders should be cancelled when the patient is transferred to another ward. This allows the site to make this determination on a ward by ward basis. This is used by the` PSJADT routines. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
23	D/C ON SERVICE TRANSFER	23;0	SET Multiple #59.723	59.723 LAST EDITED: `JUL 09, 1992` DESCRIPTION: A patient's Inpatient Medications orders will be cancelled whenever the patient is transferred between services entered here. TECHNICAL DESCR: `This allows the site to determine if a patient's orders should be cancelled when the patient is transferred to another service. This allows the site to make this determination on a service by service basis. The service` that the patient resides is determined by the ward that the patient resides, using the SERVICE field of the WARD LOCATION file. This is used by the PSJADT routines. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
25	INPATIENT ORDER NUMBER	25;E1,245	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>999999999999)!(X<0)!(X?.E1"."1N.N) X` LAST EDITED: `APR 10, 1992` HELP-PROMPT: `Type a Number between 0 and 999999999999, 0 Decimal Digits.` DESCRIPTION: `This is used to keep track of the internal order number of Inpatient Medications and IV Fluid orders placed in the NON-VERIFIED ORDERS file (53.1). This is used to provide each order with a unique internal number. This` should not be edited through the VA FileMan. TECHNICAL DESCR: This is used to produce unique internal entry numbers for orders placed into the NON-VERIFIED ORDERS file (#53.1). It is used in the routine PSGOETO. GROUP: `PSJ`
25.1	DATE 5.0 UD VER CONV FINISHED	20.5;1	DATE	INPUT TRANSFORM: `S %DT="EST" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `FEB 20, 1997` DESCRIPTION: This field tracks the date the version 5.0 Unit Dose Verification conversion finished. TECHNICAL DESCR: This field tracks the date the version 5.0 Unit Dose Verification conversion finished.
25.2	DATE 5.0 CONVERSION COMPLETED	20.5;2	DATE	INPUT TRANSFORM: `S %DT="ETX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `OCT 09, 1995` DESCRIPTION: This is the date the 5.0 postinit process completed the conversion for version 5.0. TECHNICAL DESCR: This is set when the 5.0 postinit process completes converting existing Unit Dose orders to the new (5.0) format.
25.3	DATE 5.0 PICK LIST CONV FINISH	20.5;3	DATE	INPUT TRANSFORM: `S %DT="EST" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `FEB 20, 1997` DESCRIPTION: This field will track when the version 5.0 Pick List Conversion finished. TECHNICAL DESCR: This field will track when the version 5.0 Pick List Conversion finished.
25.4	DATE 5.0 ORDER SET CONV FINISH	20.5;4	DATE	INPUT TRANSFORM: `S %DT="EST" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JUN 09, 1997` DESCRIPTION: Date the S. Order set conversion finished for version 5.0. TECHNICAL DESCR: Date the S. Order set conversion finished for version 5.0.
26	PRINT 6 BLOCKS FOR THE PRN MAR	26;1	SET	'1' FOR YES; LAST EDITED: `DEC 16, 1993` HELP-PROMPT: `Enter 1 to allow 6 blocks to be printed for the ONE-TIME/PRN orders on the 7/14 DAY MAR ONE-TIME/PRN SHEET.` DESCRIPTION: This field is used to indicate if 4 or 6 blocks are to be used for ONE-TIME/PRN orders on the 7/14 DAY MAR ONE-TIME/PRN SHEET. The 7/14 DAY MAR ONE-TIME/PRN SHEET will print 4 blocks if this field is not set to "YES". GROUP: `PSJ`
26.2	ATC SORT PARAMETER	26;2	SET	'0' FOR ATC MNEMONIC; '1' FOR ADMIN TIME; LAST EDITED: `FEB 24, 1994` HELP-PROMPT: `Enter '0' to send Pick List to ATC by drug, '1' for admin time.` DESCRIPTION: This parameter allows sending of the Pick List to the ATC machine by ATC Mnemonic within Patient (as in versions of Inpatient Medications thru 4.0), or else by admin time within patient. TECHNICAL DESCR: This SET OF CODES determines which routine is called by the SEND PICK LIST TO ATC option in Unit Dose.
26.3	PRINT DIET ABBR LABEL ON MAR	26;3	SET	'1' FOR YES; LAST EDITED: `MAY 27, 1997` HELP-PROMPT: `Enter 1 or Yes, the Dietetics Abbreviated Label will print on the MAR` DESCRIPTION: If this field contains a 1 or Yes, the Dietetics Abbreviated Label will be printed on the MAR
26.4	MAR SORT	26;4	SET	'0' FOR Sort by order's Schedule Type and then Medication Names.; '1' FOR Sort by order's Medication Names.; LAST EDITED: `OCT 08, 1998` DESCRIPTION: `If enter 0, the MAR will sort by the order's Schedule Type* and then` medication names. If enter 1, the MAR will sort by the order's medication names. * Schedule Type is sort based on the following orders: Continuous MAR One-Time/PRN MAR -------------- ---------------- Unit dose order: Unit dose orders: Continuous One-time Fill in Request PRN IV Orders: IV orders: Piggyback or Syringe type One-time Admixture type PRN Hyperal type Acknowledged Pending PRN orders Chemo type Acknowledged Pending orders: Inpatient Meds IV fluids
26.5	CALC UNITS NEEDED PRN ORDERS	26;5	SET	'1' FOR YES; LAST EDITED: `FEB 05, 2001` HELP-PROMPT: `Enter a 1 if you would like to have the UNITS NEEDED calculated for PRN orders on the Pick List.` DESCRIPTION: This field controls whether or not UNITS NEEDED will be calculated for orders with PRN in the schedule field. This information will show on the Pick List if this field is set to 1.
26.6	DAYS UNTIL STOP FOR ONE-TIME	26;6	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>30)!(X<1)!(X?.E1"."1N.N) X` LAST EDITED: `SEP 05, 2001` HELP-PROMPT: `Type a Number between 1 and 30, indicating the number of days a one-time order should last if there is no ward parameter defined.`
26.7	ROUND ATC PICK LIST UNITS	26;7	SET	'1' FOR YES; '0' FOR NO; LAST EDITED: `AUG 14, 2003` HELP-PROMPT: `Enter YES if you wish to round fractional doses when sending the pick list to the ATC.` DESCRIPTION: The purpose of this field is to allow rounding of fractional doses to be sent by the pick list to the ATC.
27	PRIORITIES FOR PENDING NOTIFY	27;1	SET	'S' FOR STAT; 'SA' FOR STAT/ASAP; 'SAN' FOR STAT/ASAP/NOW; 'A' FOR ASAP; 'AN' FOR ASAP/NOW; 'N' FOR NOW; 'SN' FOR STAT/NOW; LAST EDITED: `AUG 09, 2005` DESCRIPTION: `Enter the priorities of STAT, ASAP, or the schedule of NOW, or any combination of the three to be used to send a notification of orders with these priorities to the PSJ STAT NOW PENDING ORDER mail group.` This field is also used as the default control for field 27.1 in file 59.7, PRIORITIES FOR ACTIVE NOTIFY and for field 6 in file 59.6 PRIORITIES FOR NOTIFICATION. If these two fields are blank, then they will use the setting defined here.
27.1	PRIORITIES FOR ACTIVE NOTIFY	27;2	SET	'S' FOR STAT; 'SA' FOR STAT/ASAP; 'SAN' FOR STAT/ASAP/NOW; 'A' FOR ASAP; 'AN' FOR ASAP/NOW; 'N' FOR NOW; 'SN' FOR STAT/NOW; LAST EDITED: `AUG 09, 2005` DESCRIPTION: Enter the priorities of STAT, ASAP, or the schedule of NOW, or any combination the three to be used to send a notification of orders with these priorities to the PSJ STAT NOW ACTIVE ORDER mail group.
30.1	DATE IV ORDERS CONVERTED	30;1	DATE	INPUT TRANSFORM: `S %DT="EST" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `OCT 11, 1991` DESCRIPTION: This is the date existing IV orders were converted to look at the new person file, and linked to the appropriate protocols for use in Inpatient Medications version 4.0. TECHNICAL DESCR: This is set when the order conversion has completed. When the inits are run, this field is checked, and if a date is found the conversion will not be run. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
30.2	LAST PATIENT CONVERTED (IV)	30;2	POINTER TO PHARMACY PATIENT FILE (#55)	PHARMACY PATIENT(#55) LAST EDITED: `OCT 15, 1991` DESCRIPTION: This is the last pharmacy patient whose orders were converted to the new person file, and to the new format required by version 4.0. If this field is edited, data within inpatient medication orders may be corrupted. TECHNICAL DESCR: `This is set by PSJIPST1, which converts all IV orders to the new person file (200), and to the format required by Inpatient Medications 4.0. After all of a patient's orders have been processed, the patient is entered` here. This allows the conversion to be restarted if necessary. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
31	DAYS TO RETAIN IV STATISTICS	31;1	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>2000)!(X<100)!(X?.E1"."1N.N) X` LAST EDITED: `MAY 11, 1992` HELP-PROMPT: `Type a Number between 100 and 2000, 0 Decimal Digits` DESCRIPTION: This is used to allow the site to specify the number of days to keep data in the IV STATS file (50.8). Information may be retained in the IV STATS file for 100 to 2000 days. TECHNICAL DESCR: This is used to allow the site to specify the number of days to keep data in the IV STATS vile (50.8). If no value is found for this field, the IV STATS data will be retained for 100 days. GROUP: `PSJI`
32	IV IDENTIFIER	31;2	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>30!($L(X)<1) X` LAST EDITED: `FEB 27, 1995` HELP-PROMPT: `Answer must be 1-30 characters in length.`
34	EXPIRED IV TIME LIMIT	31;4	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>24)!(X<0)!(X?.E1"."1.N) X` LAST EDITED: `JUL 29, 2004` HELP-PROMPT: `Type the Number of Hours between 0 and 24 that continuous IV orders may be renewed after expiring` DESCRIPTION: The maximum number of hours after a continuous IV order expires that it may still be renewed
40	DEFAULT OUTPATIENT SITE	40;1	POINTER TO OUTPATIENT SITE FILE (#59)	OUTPATIENT SITE(#59) LAST EDITED: `OCT 20, 1989` HELP-PROMPT: `Enter the name of the site which will be used for OE/RR` DESCRIPTION: The outpatient site (and parameters) which will be used for ward order entry. An entry in this field will bypass the site selection prompt when entering outpatient from OE/RR. DELETE AUTHORITY: # WRITE AUTHORITY: # READ AUTHORITY: # SOURCE OF DATA: Various pharmacy data GROUP: `PSO`
40.1	ADMISSION CANCEL OF RXS	40.1;1	SET	'1' FOR YES; '0' FOR NO; LAST EDITED: `NOV 23, 1992` DESCRIPTION: This field is used to determine if outpatient medication will be cancelled after 72 hours of an admission to the medical center. TECHNICAL DESCR: set of codes GROUP: `PSO`
40.11	INTERDIVISIONAL PROCESSING	40.1;2	SET	'1' FOR YES; LAST EDITED: `MAY 11, 1992` HELP-PROMPT: `Enter 'Yes' if interdivisional processing is to occur.` DESCRIPTION: This field is used to indicate if interdivisional processing is to occur. TECHNICAL DESCR: set of codes. GROUP: `PSO`
40.12	DIVISION PROMPT ASKED	40.1;3	SET	'1' FOR YES; LAST EDITED: `MAY 11, 1992` HELP-PROMPT: `Enter 'Yes' if division prompt is to be asked.` DESCRIPTION: This field is used to indicate if the 'Division' prompt is to be asked. TECHNICAL DESCR: set of codes. GROUP: `PSO`
40.13	REFILL/RENEW DIVISION	40.1;4	POINTER TO OUTPATIENT SITE FILE (#59)	OUTPATIENT SITE(#59) LAST EDITED: `SEP 07, 1989` HELP-PROMPT: `Enter Division.` DESCRIPTION: This field is used to indicate the refill/renew division for multi divisional sites. TECHNICAL DESCR: pointer. GROUP: `PSO` UNEDITABLE
40.14	DAYS PRINTED RX STAYS IN 52.5	40.1;5	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>90)!(X<7)!(X?.E1"."1N.N) X` LAST EDITED: `MAR 18, 1993` HELP-PROMPT: `Enter from 7 to 90 days printed Rx's are to remain in suspense during the purge option.` DESCRIPTION: This field contains the number of days printed prescriptions are to remain in the RX SUSPENSE file when running the Delete From Suspense File option. The number of days to remain may be from 7 to 90. TECHNICAL DESCR: The Delete Printed Prescriptions option in the Suspense menu uses this data. GROUP: `PSO`
40.15	POLYPHARMACY W/ACTION PROFILE	40.1;6	SET	'1' FOR YES; LAST EDITED: `APR 23, 1996` HELP-PROMPT: `Enter '1' or Yes to indicate if a polypharmacy report is to print with action profiles.` DESCRIPTION: This field is used to determine if a polypharmacy report prints with action profile across all divisions. TECHNICAL DESCR: set of codes. GROUP: `PSO`
40.16	AUTOMATE CPRS REFILL	40.1;7	SET	'0' FOR NO; '1' FOR YES; LAST EDITED: `JUN 02, 2008` HELP-PROMPT: `Enter Y to process CPRS refill automatically or N to continue the current manual process.` DESCRIPTION: `This field should be marked "YES" if refill requests from CPRS are to be processed automatically and filed in the PRESCRIPTION file (#52) and placed on Suspense. To continue the current process of filing in the PENDING` OUTPATIENT ORDERS fie (#52.41) for manual processing, this field should be marked "NO". TECHNICAL DESCR: Set of codes. "YES" to process CPRS refill automatically and "NO" to continue the current manual process.
40.19	EXEMPT WARD FROM AUTOCANCEL	40.19;0	POINTER Multiple #59.701	59.701 DESCRIPTION: For WARD LOCATIONS entered here, prescriptions for patients on these wards will not be canceled by the Autocancel RX's on Admission Outpatient Pharmacy system job. TECHNICAL DESCR: This is a pointer to the WARD LOCATION (#42) File.
40.2	USE OF ANOTHER LANGUAGE	40.2;1	SET	'1' FOR YES; '0' FOR NO; LAST EDITED: `SEP 16, 2002` HELP-PROMPT: `Enter 1 or Yes if another language translations is used.` DESCRIPTION: This field is used to indicate if another language translations are used. TECHNICAL DESCR: set of codes. GROUP: `PSO`
40.21	SECONDS	40.2;2	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'SECOND'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'SECOND'. TECHNICAL DESCR: Free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","SECONDS",X)="" 2)= K ^PS(59.7,"AOTH","SECONDS",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.22	MINUTES	40.2;3	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'MINUTES'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'MINUTES'. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","MINUTES",X)="" 2)= K ^PS(59.7,"AOTH","MINUTES",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.23	DAYS	40.2;4	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'DAYS'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'DAYS'. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","DAYS",X)="" 2)= K ^PS(59.7,"AOTH","DAYS",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.24	WEEKS	40.2;5	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'WEEKS'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'WEEKS'. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","WEEKS",X)="" 2)= K ^PS(59.7,"AOTH","WEEKS",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.25	HOURS	40.2;6	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'HOURS'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'HOURS'. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","HOURS",X)="" 2)= K ^PS(59.7,"AOTH","HOURS",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.26	MONTHS	40.2;7	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'MONTHS'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'MONTHS'. TECHNICAL DESCR: free text GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","MONTHS",X)="" 2)= K ^PS(59.7,"AOTH","MONTHS",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.27	AND	40.2;8	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'AND'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'AND'. TECHNICAL DESCR: free text GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","AND",X)="" 2)= K ^PS(59.7,"AOTH","AND",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.28	THEN	40.2;9	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'THEN'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'THEN'. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","THEN",X)="" 2)= K ^PS(59.7,"AOTH","THEN",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.29	EXCEPT	40.2;10	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `OCT 10, 2002` HELP-PROMPT: `Enter the other language translation of the word 'EXCEPT'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'EXCEPT'. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","EXCEPT",X)="" 2)= K ^PS(59.7,"AOTH","EXCEPT",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.3	ONE	40.3;1	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'ONE'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'ONE'. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","ONE",X)="" 2)= K ^PS(59.7,"AOTH","ONE",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.31	TWO	40.3;2	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'TWO'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'TWO'. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","TWO",X)="" 2)= K ^PS(59.7,"AOTH","TWO",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.32	THREE	40.3;3	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'THREE'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'THREE'. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","THREE",X)="" 2)= K ^PS(59.7,"AOTH","THREE",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.33	FOUR	40.3;4	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'FOUR'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'FOUR'. TECHNICAL DESCR: free text GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","FOUR",X)="" 2)= K ^PS(59.7,"AOTH","FOUR",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.34	FIVE	40.3;5	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'FIVE'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'FIVE'. TECHNICAL DESCR: free text GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","FIVE",X)="" 2)= K ^PS(59.7,"AOTH","FIVE",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.35	SIX	40.3;6	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'SIX'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'SIX'. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","SIX",X)="" 2)= K ^PS(59.7,"AOTH","SIX",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.36	SEVEN	40.3;7	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'SEVEN'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'SEVEN'. TECHNICAL DESCR: free text GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","SEVEN",X)="" 2)= K ^PS(59.7,"AOTH","SEVEN",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.37	EIGHT	40.3;8	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `JAN 23, 2003` HELP-PROMPT: `Enter the other language translation of the word 'EIGHT'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'EIGHT'. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","EIGHT",X)="" 2)= K ^PS(59.7,"AOTH","EIGHT",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.38	NINE	40.3;9	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'NINE'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'NINE'. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","NINE",X)="" 2)= K ^PS(59.7,"AOTH","NINE",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.39	TEN	40.3;10	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'TEN'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'TEN'. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","TEN",X)="" 2)= K ^PS(59.7,"AOTH","TEN",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.4	ONE-HALF	40.3;11	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'ONE-HALF'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'ONE-HALF'. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","ONE-HALF",X)="" 2)= K ^PS(59.7,"AOTH","ONE-HALF",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.41	ONE-FOURTH	40.3;12	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'ONE-FOURTH'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'ONE-FOURTH'. TECHNICAL DESCR: free text GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","ONE-FOURTH",X)="" 2)= K ^PS(59.7,"AOTH","ONE-FOURTH",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.42	ONE-THIRD	40.3;13	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'ONE-THIRD'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'ONE-THIRD'. TECHNICAL DESCR: free text GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","ONE-THIRD",X)="" 2)= K ^PS(59.7,"AOTH","ONE-THIRD",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.43	TWO-THIRDS	40.3;14	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'TWO-THIRDS'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'TWO-THIRDS'. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","TWO-THIRDS",X)="" 2)= K ^PS(59.7,"AOTH","TWO-THIRDS",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.44	THREE-FOURTHS	40.3;15	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 12, 2001` HELP-PROMPT: `Enter the other language translation of the word 'THREE-FOURTHS'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'THREE-FOURTHS'. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","THREE-FOURTHS",X)="" 2)= K ^PS(59.7,"AOTH","THREE-FOURTHS",X) 3)= Do not delete! This xref is used to find the translation for other languages that prints on Rx labels.
40.45	FOR	40.2;11	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>15!($L(X)<1) X` LAST EDITED: `SEP 24, 2001` HELP-PROMPT: `Enter the other language translation of the word 'FOR'. Answer must be 1-15 characters in length.` DESCRIPTION: This field is used to store the other language translation of the word 'FOR. TECHNICAL DESCR: free text. GROUP: `PSO` CROSS-REFERENCE: `59.7^AOTH^MUMPS` 1)= S ^PS(59.7,"AOTH","FOR",X)="" 2)= K ^PS(59.7,"AOTH","FOR",X) 3)= Do not delete. This xref is used to do a quick lookup for translation.
41	LAST RX PRE V6	49.99;5	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>1000000000)!(X<0)!(X?.E1"."1N.N) X` LAST EDITED: `NOV 27, 1992` HELP-PROMPT: `This data is not entered through file manager.` DESCRIPTION: `NOT IN USE FOR VERSION 7.0` This field will be used during the installation of version 6.0. This field will hold the last prescription number file #52. This number will be used to indicated the last prescription to be converted if a restart is needed. TECHNICAL DESCR: numeric DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSO` UNEDITABLE
42	TOTAL RX'S PURGED TO DATE	40.01;1	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>999999)!(X<0)!(X?.E1"."1N.N) X` LAST EDITED: `NOV 01, 1988` HELP-PROMPT: `Type a Number between 0 and 999999, 0 Decimal Digits` DESCRIPTION: This field is currently not in use. TECHNICAL DESCR: numeric GROUP: `PSO`
46.1	TRANSMISSION START DATE	46;1	DATE	INPUT TRANSFORM: `S %DT="EX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `AUG 22, 2003` DESCRIPTION: This is the start date of the most recent HL7 extract of patients in the TPB ELIGIBILITY file (#52.91).
46.2	TRANSMISSION END DATE	46;2	DATE	INPUT TRANSFORM: `S %DT="EX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `AUG 22, 2003` DESCRIPTION: This is the end date of the most recent HL7 extract of patients in the TPB ELIGIBILITY file (#52.91).
46.3	BATCH CONTROL ID	46;3	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>20!($L(X)<1) X` LAST EDITED: `AUG 22, 2003` HELP-PROMPT: `Answer must be 1-20 characters in length.` DESCRIPTION: This is the Batch Control ID of the most recent HL7 extract of patients in the TPB ELIGIBILITY file (#52.91).
46.4	NUMBER OF MSH COUNT	46;4	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>999999999999)!(X<0)!(X?.E1"."1N.N) X` LAST EDITED: `AUG 22, 2003` HELP-PROMPT: `Type a Number between 0 and 999999999999, 0 Decimal Digits` DESCRIPTION: This is the total count of MSH headers of the most recent HL7 extract of patients in the TPB ELIGIBILITY file (#52.91).
46.5	NUMBER OF LINES COUNT	46;5	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>999999999999)!(X<0)!(X?.E1"."1N.N) X` LAST EDITED: `AUG 22, 2003` HELP-PROMPT: `Type a Number between 0 and 999999999999, 0 Decimal Digits` DESCRIPTION: This is the total count of the number of lines from the most recent HL7 extract of patients in the TPB ELIGIBILITY file (#52.91).
47	SCRIPTALK PRINT DEVICE MAPPING	47;0	POINTER Multiple #59.747	59.747 DESCRIPTION: This multiple adds the capability to tie a ScripTalk printer to regular Pharmacy label printer(s) to control where the ScripTalk labels print for multi-divisions. TECHNICAL DESCR: `Multiple print devices may be mapped to a ScripTalk printer. If no data is defined in this multiple, the ScripTalk printer tied to the division will be used.` The use of this multiple builds upon existing ScripTalk functionality, so a divisional ScripTalk device must be defined for the mapped device functionality to work properly and to have a default device defined.
49.95	DATE AUTO-EXPIRE COMPLETED	49.99;8	DATE	INPUT TRANSFORM: `S %DT="E" D ^%DT S X=Y K:X<1 X` LAST EDITED: `MAY 18, 2007` HELP-PROMPT: `Last Date Auto-Expire Processed` DESCRIPTION: This is the last date that the nightly auto-expire processed. Processing will continue from this date the next time the job runs. TECHNICAL DESCR: This is the last date that the nightly auto-expire processed. Processing will continue from this date the next time the job runs and will expire prescriptions with expiration dates up to and including DT-1. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^
49.96	DATE V7 INSTALLED	49.99;4	DATE	INPUT TRANSFORM: `S %DT="EX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JUL 07, 1995` HELP-PROMPT: `Data not entered through Fileman.` DESCRIPTION: `This filed is used to indicate the date version 7.0 of OP was installed.` TECHNICAL DESCR: date DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSO` UNEDITABLE
49.97	LAST RX CONVERTED	49.99;3	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>1000000000)!(X<0)!(X?.E1"."1N.N) X` LAST EDITED: `NOV 24, 1992` HELP-PROMPT: `This data is not entered through file manager.` DESCRIPTION: `THIS FIELD IS NOT IN US FOR VERSION 7.0.` This is simply a scratch area which holds the internal entry number of the last entry in 52 for which the post init conversion for V6 has been completed. TECHNICAL DESCR: Numeric DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSO` UNEDITABLE
49.98	DATE OP 6 INSTALLED	49.99;2	DATE	INPUT TRANSFORM: `S %DT="EX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JUL 07, 1995` HELP-PROMPT: `Enter date installation was done.` DESCRIPTION: This field is used to indicate the date OP v6 was installed. This field will also be used to deteminewhat Rxs are eligible for release. TECHNICAL DESCR: date DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSO` UNEDITABLE
49.981	V7 POST BACKGROUND START	49.99;7	DATE	**********************REQUIRED FIELD********************** INPUT TRANSFORM: `S %DT="ETXR" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JUL 07, 1995` HELP-PROMPT: `Data sholud not be entered through file manager.` DESCRIPTION: `This field is used to indicate date/time background job started.` TECHNICAL DESCR: date/time DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ SOURCE OF DATA: PSOPOST GROUP: `PSO` UNEDITABLE
49.982	V7 POST BACKGROUND STOP	49.99;6	DATE	**********************REQUIRED FIELD********************** INPUT TRANSFORM: `S %DT="ETXR" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JUL 07, 1995` HELP-PROMPT: `Data not entered through Fileman.` DESCRIPTION: `This field is used to indicate the date/time the v7 post background ran to completion.` TECHNICAL DESCR: date/time DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ SOURCE OF DATA: routine PSOPOST GROUP: `PSO` UNEDITABLE
49.99	OUTPATIENT VERSION	49.99;1	NUMBER	**********************REQUIRED FIELD********************** INPUT TRANSFORM: `K:+X'=X!(X>99)!(X<1)!(X?.E1"."3N.N) X` LAST EDITED: `OCT 12, 1988` HELP-PROMPT: `Type a Number between 1 and 99, 2 Decimal Digits` DESCRIPTION: This field is used to indicate the current version of the Outpatient Pharmacy package installed. TECHNICAL DESCR: numeric DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSO` UNEDITABLE
50	AR/WS AMIS UPDATE	50;1	DATE	INPUT TRANSFORM: `S %DT="ESTX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `FEB 09, 1990` DESCRIPTION: This field contains the Date/Time that the nightly job to update the AR/WS Stats File (#58.5) was last run to completion. This field is set automatically when the nightly job is run. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSGW`
59.01	AR/WS VERSION	59.99;1	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>999)!(X<1)!(X?.E1"."4N.N) X` LAST EDITED: `JUN 20, 1989` HELP-PROMPT: `Type a Number between 1 and 999, 3 Decimal Digits` DESCRIPTION: This field will contain the current version of the AR/WS package. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSGW`
59.02	DATE INSTALLED	59.99;2	DATE	INPUT TRANSFORM: `S %DT="EX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JUN 20, 1989` HELP-PROMPT: `Enter Date the current AR/WS version was installed.` DESCRIPTION: This field will contain the date the current version of AR/WS was installed. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSGW`
59.1	BACKORDER CONVERSION	59.99;3	DATE	INPUT TRANSFORM: `S %DT="EX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JUN 20, 1989` HELP-PROMPT: `Enter Date the BACKORDER CONVERSION was completed.` DESCRIPTION: This field will contain the date the BACKORDER CONVERSION for AR/WS V2.04 was completed. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSGW`
59.2	MULTI-DIVISION CONVERSION	59.99;4	DATE	INPUT TRANSFORM: `S %DT="EX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JUN 20, 1989` HELP-PROMPT: `Enter Date the MULTI-DIVISION CONVERSION was completed.` DESCRIPTION: This field will contain the date the MULTI-DIVISION CONVERSION for AR/WS V2.04 was completed. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSGW`
59.3	WARD (for %) CONVERSION	59.99;5	DATE	INPUT TRANSFORM: `S %DT="EX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `OCT 02, 1989` HELP-PROMPT: `Enter Date the WARD (for %) CONVERSION was completed` DESCRIPTION: This field contains the date the WARD (for %) pointer conversion for AR/WS V2.04 was completed. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSGW`
59.4	RETURN REASON CONVERSION	59.99;6	DATE	INPUT TRANSFORM: `S %DT="EX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JUL 09, 1990` HELP-PROMPT: `Enter Date the RETURN REASON CONVERSION was completed.` DESCRIPTION: This field will contain the date the RETURN REASON CONVERSION for AR/WS V2.2 was completed. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSGW`
60.02	*LAST PAT CONVERTED FOR VER 4	60;2	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>999999999)!(X<0)!(X?.E1"."1N.N) X` LAST EDITED: `DEC 01, 1994` HELP-PROMPT: `Type a Number between 0 and 999999999, 0 Decimal Digits.` DESCRIPTION: `This is used by the version 4 post-inits of the Inpatient Medications package to keep track of the patients whose orders have been converted to the New Person file and Primary Drug.` THIS IS FOR USE ONLY BY THE POST-INITS, AND SHOULD NOT BE EDITED THROUGH VA FILEMAN. TECHNICAL DESCR: `This is used by the routine PSJIPST0 to keep track of the last patient whose orders have been converted to the New Person file and Primary Drug, to allow the inits to be rerun if necessary. This is for version 4 of the` Inpatient Medications package. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
60.1	*BAXTER ATC 212 DEVICE	60;1	FREE TEXT	INPUT TRANSFORM: `K:$L(X)>20!($L(X)<1) X D:$D(X) ENDLP^PSSDDUT` LAST EDITED: `JUN 23, 1997` HELP-PROMPT: `Enter the device the ATC is listed as in the device file.` DESCRIPTION: This is the name of the device from the DEVICE file used for the Baxter ATC dispensing machine. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJU` NOTES: `XXXX--CAN'T BE ALTERED EXCEPT BY PROGRAMMER`
61.2	DAYS NEW LABELS LAST	61;2	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>35)!(X<0)!(X?.E1"."1N.N) X` LAST EDITED: `MAR 12, 1991` HELP-PROMPT: `Type a Number between 0 and 35, 0 Decimal Digits.` DESCRIPTION: This is number of days that new labels created by the Unit Dose Medications package are to last. EXECUTABLE HELP: `D LBLS^PSSDDUT2` DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJ`
63.51	PICK LIST AUTO-PURGE	63.5;1	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>90)!(X<1)!(X?.E1"."1N.N) X` LAST EDITED: `SEP 28, 1989` HELP-PROMPT: `Type a Number between 1 and 90, 0 Decimal Digits.` DESCRIPTION: `This is the number of days that the computer will hold Unit Dose Pick Lists that have been filed away. If an entry is found here by the daily background job, the job will delete those pick lists that have been filed` away and have existed longer than the number of days specified here. Enter a number here to start the auto-purge the next time daily background job runs. Delete any entry made here to stop the auto-purge. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJU`
63.52	DATE/TIME AUTO-PURGE EDITED	63.5;2	DATE	INPUT TRANSFORM: `S %DT="ESTXR" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `SEP 08, 1989` DESCRIPTION: This is the date and time the PICK LIST AUTO-PURGE was edited. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJU`
63.53	USER LAST EDITING AUTO-PURGE	63.5;3	POINTER TO NEW PERSON FILE (#200)	NEW PERSON(#200) LAST EDITED: `JUL 08, 1991` DESCRIPTION: This is the user who last edited the PICK LIST AUTO-PURGE field. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJU`
63.54	DATE PICK LIST LAST FILED AWAY	63.5;4	DATE	INPUT TRANSFORM: `S %DT="ESTXR" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `SEP 26, 1989` DESCRIPTION: This is the date the job to file away pick lists was last run. DELETE AUTHORITY: ^ WRITE AUTHORITY: ^ GROUP: `PSJU`
64	PARAM FILE CONVERSION STATUS	20.4;12	SET	'0' FOR NOT YET STARTED; '1' FOR MOVING DATA TO TMP; '2' FOR MOVING DATA BACK TO 53.45.; '3' FOR COMPLETED; LAST EDITED: `NOV 10, 1992` DESCRIPTION: This is the status of the conversion of the 53.45 file to DINUM format. TECHNICAL DESCR: `This flag is used to determine the progress of the conversion of the INPATIENT USER PARAMETERS file (53.45) to DINUM format. This allows the conversion to be restarted at the point it terminated if the process halts` before it has completed. GROUP: `PSJ`
65	PICK LIST CONVERSION DATE	20.4;13	DATE	INPUT TRANSFORM: `S %DT="E" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `DEC 07, 1993` HELP-PROMPT: `This is the date the Inpatient Meds V4.5 Pick List conversion completed.` DESCRIPTION: This is the date the Inpatient Meds V4.5 conversion of existing pick list data to the new VA FileMan compatible format completed. TECHNICAL DESCR: This is set when the Inpatient Meds 4.5 pick list conversion completes.
66	V4.5 PICK LIST CONVERT MARKER	20.4;14	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>99999999)!(X<0)!(X?.E1"."1N.N) X` LAST EDITED: `DEC 07, 1993` HELP-PROMPT: `Type a Number between 0 and 99999999, 0 Decimal Digits` DESCRIPTION: This is the IEN of the last pick list to be converted to the VA FileMan compatible file structure exported with version 4.5 of Inpatient Medications. TECHNICAL DESCR: This stores the IEN of the last pick list converted to the new format. This field is used to allow the conversion process to start with the correct pick list if the conversion is interupted and then restarted.
67	V4.5 PICK LIST CONVERT STATUS	20.4;15	SET	'1' FOR MOVING DATA TO XTMP; '2' FOR MOVING DATA FROM XTMP TO PS(53.5; LAST EDITED: `DEC 07, 1993` DESCRIPTION: This is used to allow the pick list conversion to be restarted at the correct conversion phase if the process must be restarted.
70	LAST DRUG LINKED	70;1	POINTER TO DRUG FILE (#50)	DRUG(#50) LAST EDITED: `APR 10, 1992` DESCRIPTION: When using the PSAUNL option to link the Drug/Item file, the last drug linked will be stored here and offered as a point at which to resume the loop upon re-entry. TECHNICAL DESCR: Used by ^PSAUNL to store the entry from #50 at which the user stopped.
70.1	LAST DRUG LINKER	70;2	POINTER TO NEW PERSON FILE (#200)	NEW PERSON(#200) LAST EDITED: `APR 10, 1992` DESCRIPTION: The person using the PSAUNL option when the LAST DRUG LINKED value is stored. TECHNICAL DESCR: The DUZ of the person using ^PSAUNL to link #50 - #441.
70.2	LAST DRUG LINK DATE	70;3	DATE	INPUT TRANSFORM: `S %DT="ETX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `APR 10, 1992` DESCRIPTION: The date/time that the PSAUNL option was last used and the LAST DRUG LINKED value was entered. TECHNICAL DESCR: When ^PSAUNL last entered DRUG LINKED and LINKER values.
71	DATE V2 CS/DA CONVERSION	70;4	DATE	INPUT TRANSFORM: `S %DT="EX" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `MAR 01, 1993` HELP-PROMPT: `Enter date that the post-inits for Version 2.0 of Controlled Substances or Drug Accountability were completed.` DESCRIPTION: This field will contain the date that the post-inits were completed for Version 2.0 of Controlled Substances or Drug Accountability. TECHNICAL DESCR: `Version 2.0 of Controlled Substances and Drug Accountability will update the DRUG ACCOUNTABILITY STATS (#58.8) file with a new multiple pointer to the GENERIC INVENTORY file (#445) and change the format of the MONTHLY` ACTIVITY multiple from five (5) digits to seven (7) digits.
72	INPATIENT DISPENSING UPDATE?	70;5	SET	'1' FOR YES; LAST EDITED: `MAR 17, 1993` HELP-PROMPT: `Enter 1 or YES to enable updating by AR/WS.` DESCRIPTION: This field is checked before attempting to update a Drug Accountability Location with AR/WS dispensing. TECHNICAL DESCR: Before ^PSGWUAS calls ^PSARWS a check is made on this field before attempting updates to a Drug Accountability Location.
80	PSS VERSION	80;1	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>999)!(X<1)!(X?.E1"."3N.N) X` LAST EDITED: `MAR 26, 1996` HELP-PROMPT: `Type a Number between 1 and 999, 2 Decimal Digits`
80.7	DEFAULT MED ROUTE FOR CPRS	80;7	SET	'0' FOR NO; '1' FOR YES; LAST EDITED: `JUL 09, 2009` HELP-PROMPT: `Enter Y to display only the default med route in CPRS or N to continue with the current functionality.` DESCRIPTION: `This field should be marked "YES" if the site prefers the MED ROUTE field (#.06) in the PHARMACY ORDERABLE ITEM file (#50.7) to appear as the default/only entry during CPRS order entry. If no default medication route is` defined in the PHARMACY ORDERABLE ITEM file (#50.7), then the routes from the DOSAGE FORM file (#50.606) will display. This field will affect only orders entered via the Inpatient Medications dialog or the Outpatient Medications dialog in CPRS. It will not impact IV Fluids entered via CPRS or orders entered via backdoor Pharmacy. TECHNICAL DESCR: Set of codes. "YES" to display only the default med route in CPRS and "NO" to continue with the current functionality.
81	ORDERABLE ITEM STATUS TRACKER	80;2	SET	'1' FOR AUTO CREATE STARTED; '2' FOR AUTO CREATE FINISHED; '3' FOR MANUAL CREATE DONE; '0' FOR AUTO CREATE NEVER STARTED; '4' FOR SEND MASTER FILE UPDATE TO OERR; LAST EDITED: `MAR 26, 1996`
90	PSU PBM JOB	90;1	DATE	INPUT TRANSFORM: `S %DT="ET" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `AUG 10, 1998` DESCRIPTION: This field is used by PBM to monitor that the monthly extract program ran to completion.
90.01	PBM AR/WS AOU MAPPINGS	90.01;0	POINTER Multiple #59.79001	59.79001 LAST EDITED: `SEP 22, 2003` DESCRIPTION: `The mapping between an Automatic Replenishment/Ward Stock (AR/WS) Area of Use (AOU) and either a Medical Center Division or Outpatient Site is stored in this multiple. This mapping shall be used by the Pharmacy Benefit` Management (PBM) application when extracting dispensing information from the AR/WS application to assign workload to the appropriate division or outpatient site. If an AOU is not mapped to a Medical Center Division or Outpatient site, the dispensing data will be extracted under the facility at which the database resides.
90.02	PBM CS NAOU MAPPINGS	90.02;0	POINTER Multiple #59.79002	59.79002 LAST EDITED: `SEP 22, 2003` DESCRIPTION: `The mapping between a Controlled Substance (CS) Narcotic Area of Use (NAOU) and either a Medical Center division or Outpatient site is stored in this multiple. This mapping shall be used by the Pharmacy Benefit Management` (PBM) application when extracting dispensing information from the CS application to assign workload to the appropriate division or outpatient site. If a CS NAOU is not mapped to a Medical Center division or Outpatient site, the dispensing data will be extracted under the facility at which the database resides.
90.03	PBM DA PHARM LOC MAPPINGS	90.03;0	POINTER Multiple #59.79003	59.79003 LAST EDITED: `SEP 22, 2003` DESCRIPTION: `The mapping between a Drug Accountability (DA) Pharmacy location and either a Medical Center division or Outpatient site is stored in this multiple. This mapping shall be used by the Pharmacy Benefit Management (PBM)` application when extracting purchasing information from the DA application to assign procurement data to the appropriate division or Outpatient site. If a DA Pharmacy location is not mapped to a Medical Center division or Outpatient site, the procurement data will be extracted under the facility at which the database resides.
91	DOSE CONVERSION STATUS TRACKER	80;3	SET	'0' FOR CONVERSION NEVER RUN; '1' FOR CONVERSION QUEUED; '2' FOR CONVERSION STARTED; '3' FOR CONVERSION COMPLETE; LAST EDITED: `MAR 28, 2000` DESCRIPTION: This field tracks the status of the dosage conversion. UNEDITABLE
92	DOSE CONVERSION START	80;4	DATE	INPUT TRANSFORM: `S %DT="ESTR" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `MAR 28, 2000` DESCRIPTION: This is the date/time when the dosage conversion started. UNEDITABLE
93	DOSE CONVERSION STOP	80;5	DATE	INPUT TRANSFORM: `S %DT="ESTR" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `MAR 28, 2000` DESCRIPTION: This is the date/time when the dosage conversion ended. UNEDITABLE
94	DOSE CONVERSION RUN BY	80;6	POINTER TO NEW PERSON FILE (#200)	NEW PERSON(#200) LAST EDITED: `MAR 28, 2000` DESCRIPTION: This is the person who ran the dosage conversion. UNEDITABLE
9999999.01	IHS OUT-PHARM PROV CONV DATE	9999999;1	DATE	INPUT TRANSFORM: `S %DT="ET" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JUN 01, 1993`
9999999.02	IHS OUT-PHARM PROV LAST RX	9999999;2	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>999999)!(X<0)!(X?.E1"."1N.N) X` LAST EDITED: `JUN 01, 1993` HELP-PROMPT: `Type a Number between 0 and 999999, 0 Decimal Digits`
9999999.03	MED-INSTR CONV DATE	9999999;3	DATE	INPUT TRANSFORM: `S %DT="ET" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JUN 03, 1993`
9999999.04	MED-INSTR L-REC NO	9999999;4	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>99999)!(X<0)!(X?.E1"."1N.N) X` LAST EDITED: `JUN 03, 1993` HELP-PROMPT: `Type a Number between 0 and 99999, 0 Decimal Digits`
9999999.05	INTERVENTION CONV DATE	9999999;5	DATE	INPUT TRANSFORM: `S %DT="ET" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JUN 04, 1993`
9999999.06	INTERVENTION L-REC NO	9999999;6	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>99999)!(X<0)!(X?.E1"."1N.N) X` LAST EDITED: `JUN 04, 1993` HELP-PROMPT: `Type a Number between 0 and 99999, 0 Decimal Digits`
9999999.07	FILE 50 1ST DIV FLAG DATE	9999999;7	DATE	INPUT TRANSFORM: `S %DT="ET" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JUN 08, 1993`
9999999.08	FILE 50 1ST DIV FLAG L-REC	9999999;8	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>99999)!(X<0)!(X?.E1"."1N.N) X` LAST EDITED: `JUN 08, 1993` HELP-PROMPT: `Type a Number between 0 and 99999, 0 Decimal Digits`
9999999.09	FILE 50 APU DATE	9999999;9	DATE	INPUT TRANSFORM: `S %DT="ET" D ^%DT S X=Y K:Y<1 X` LAST EDITED: `JUN 08, 1993`
9999999.11	FILE 50 APU L-REC	9999999;10	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>99999)!(X<0)!(X?.E1"."1N.N) X` LAST EDITED: `JUN 08, 1993` HELP-PROMPT: `Type a Number between 0 and 99999, 0 Decimal Digits`

Field #

Name

Loc

Type

Details

.01

SITE NAME

0;1

FREE TEXT

************************REQUIRED FIELD************************

INPUT TRANSFORM: K:$L(X)>40!($L(X)<1) X S:$D(X) DINUM=1
LAST EDITED: JUL 28, 1989
HELP-PROMPT: Answer must be 1-40 characters in length.

DESCRIPTION:

This is the name of the site using the pharmacy packages.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSO
NOTES: XXXX--CAN'T BE ALTERED EXCEPT BY PROGRAMMER

CROSS-REFERENCE: 59.7^B

1)= S ^PS(59.7,"B",$E(X,1,30),DA)=""

2)= K ^PS(59.7,"B",$E(X,1,30),DA)

10

NDF VERSION

10;1

FREE TEXT

INPUT TRANSFORM: K:$L(X)>10!($L(X)<1) X
LAST EDITED: JUN 21, 1989
HELP-PROMPT: Answer must be 1-10 characters in length.

DESCRIPTION:

This is the version of National Drug File installed.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSN

10.1

LAST DRUG CONVERTED

10;4

POINTER TO DRUG FILE (#50)

DRUG(#50)

LAST EDITED: JUL 23, 1998

DESCRIPTION:

This field holds the IEN of the last entry in file 50 which has been converted to the new version 4 value.  It can be used for restart.

10.2

V4 CONVERSION COMPLETED

10;5

SET

'1' FOR YES;

LAST EDITED: JUL 23, 1998

DESCRIPTION:

This field is set to 1 when the third piece of the ND node in file 50 has been converted to the new version 4 value for all drugs.

11

RESTART NUMBER

10;2

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>999999)!(X<1)!(X?.E1"."1N.N) X
LAST EDITED: OCT 17, 1991
HELP-PROMPT: Type a Number between 1 and 999999, 0 Decimal Digits

DESCRIPTION:

In the event that the Post-Init does not run to completion, the number in the local drug file that was last converted is saved in this field. This number is used to restart the Post-Init conversion process.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSN

12

CONVERSION REMATCH OPTION DONE

10;3

SET

'1' FOR YES;
'0' FOR NO;

LAST EDITED: OCT 17, 1991

DESCRIPTION:

This field is used to check to see if the Conversion Rematch option has done if there are entries to be converted.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSN

13

PMIS PRINTER

10;6

POINTER TO DEVICE FILE (#3.5)

DEVICE(#3.5)

LAST EDITED: DEC 03, 1998
HELP-PROMPT: This printer will be used as the default for the printing of Patient Medication Instruction Sheets (PMIS).
DESCRIPTION: This field will be used to designate a default printer for the printing of Patient Medication Instruction Sheets (PMIS). This default can be changed during the actually printing of the PMIS. If no value is found, the user
```
will be prompted with a printer device.
```

14

PMIS LANGUAGE

10;7

SET

'1' FOR English;
'2' FOR Spanish;

LAST EDITED: APR 06, 2000
HELP-PROMPT: This language will be used as the default for the printing of Patient Medication Instruction Sheets (PMIS).
DESCRIPTION: This field will be used to designate a default language for the printing of Patient Medication Instruction Sheets (PMIS). This default can be changed during the actually printing of the PMIS. If no value is found, the user
```
will be prompt to select a language.
```

15

PMIS SECTION DELETE

10;8

FREE TEXT

INPUT TRANSFORM: K:$L(X)>30!($L(X)<1) X
LAST EDITED: FEB 03, 2003
HELP-PROMPT: Enter the section label(s) to be excluded from the PMI print on Outpatient labels. If more than one section is to be deleted, enter the labels separated by commas.
DESCRIPTION: The purpose of this field is to define the section(s) of the Patient Medication Information (PMI) to be excluded when printing Outpatient labels. If more than one section is to be deleted, the label(s) should be separated
```
by commas. For example: R,Z to exclude the STORAGE and DISCLAIMER sections.
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```

16

WARNING LABEL SOURCE

10;9

SET

'N' FOR NEW;

LAST EDITED: APR 09, 2004
HELP-PROMPT: Enter "N" for NEW to use commercial data source for warning labels.

DESCRIPTION:

An "N" in this field indicates that the new commercial source for warning labels will be used.

TECHNICAL DESCR: If there is an "N" for "New" in this field, the commercial data source for warning labels from the WARNING LABEL-ENGLISH (#50.625) or WARNING LABEL-SPANISH (#50.626) will be used to print the warning labels. Otherwise,
```
the old RX CONSULT file (#54) warning labels will be used.
```

16.1

CMOP WARNING LABEL SOURCE

10;10

SET

'N' FOR NEW;

LAST EDITED: SEP 17, 2006
HELP-PROMPT: Enter "N" for NEW to use commercial data source for CMOP warning labels.

DESCRIPTION:

An "N" for "New" in this field indicates that the new commercial source for warning labels will be used for CMOP.

TECHNICAL DESCR: If there is an "N" for "New" in this field, the commercial data source for warning labels from the WARNING LABEL-ENGLISH (#50.625) file or WARNING LABEL-SPANISH (#50.626) file will be sent to CMOP. Otherwise, warnings from
```
the old RX CONSULT (#54) file are sent.
```

16.2

OPAI WARNING LABEL SOURCE

10;11

SET

'N' FOR NEW;

LAST EDITED: SEP 17, 2006
HELP-PROMPT: Enter "N" for NEW to use commercial data source for OPAI warning labels.

DESCRIPTION:

An "N" for "New" in this field indicates that the new commercial source for warning labels will be used for OPAI.

TECHNICAL DESCR: If there is an "N" for "New" in this field, the commercial data source for warning labels from the WARNING LABEL-ENGLISH (#50.625) file or WARNING LABEL-SPANISH (#50.626) file will be sent to the Outpatient Pharmacy
```
Automation Interface (OPAI). Otherwise, warnings from the old RX CONSULT (#54) file are sent.
```

20.01

*IV STATS/200 CONVERSION STATU

20;10

SET

'0' FOR NOT YET STARTED;
'1' FOR MOVING CONVERTED DATA TO UTILITY;
'2' FOR MOVING CONVERTED DATA BACK TO 50.8;
'3' FOR COMPLETED;

LAST EDITED: DEC 01, 1994

DESCRIPTION:

This is the status of the process that converts the providers in the IV STATS file (50.8) from the PROVIDER file (6) to the NEW PERSON file (200).

TECHNICAL DESCR:

This flag is set by the routine PSJC200 as part of the post-init process.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

20.1

VERSION NUMBER LAST INITS RUN

20;1

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>999.99)!(X<.01)!(X?.E1"."3N.N) X
LAST EDITED: SEP 10, 1989
HELP-PROMPT: Type a Number between .01 and 999.99, 2 Decimal Digits.

DESCRIPTION:

This is the version number of the last inits run for the Inpatient Medications package.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSJI

20.11

*NEW PERSON CONVERSION DATE

20;11

DATE

INPUT TRANSFORM: S %DT="ESTX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: DEC 01, 1994

DESCRIPTION:

This is the date and time that the Inpatient post-init process completed the conversion of it's data for the Provider file (6) to the New Person file (200).

TECHNICAL DESCR: This is used and set by the routine PSJC200. If there a date here, the conversion will not run. If the conversion does run, the date and time it completes is entered here. This allows the sites to rerun the inits if
```
necessary without the conversion running again (which would corrupt the data).
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

20.12

PRIMARY DRUG CONVERSION DATE

20;12

DATE

INPUT TRANSFORM: S %DT="ESTXR" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JAN 08, 1992
HELP-PROMPT: Answer must be 1-45 characters in length.

DESCRIPTION:

This is the date the Primary Drug manual create process was completed.  This should not be set through VA FileMan.

TECHNICAL DESCR: This is the date the Primary Drug manual create process was completed. This is automatically set once a user has completed the process, and should not be edited through the VA FileMan. The version 4 Inpatient
```
Medications inits cannot be run until the manual create process has been completed and this date has been set.
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

20.13

DATE V4 PRE-PACKET INSTALLED

20;13

DATE

INPUT TRANSFORM: S %DT="ESTXR" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JUL 30, 1991

DESCRIPTION:

This is the date and time the Inpatient Medications version 4 pre-release packet was installed at this site.

TECHNICAL DESCR: Inpatient Medications version 4 will not install unless the pre-release packet has already been installed. When the pre-release packet is installed, it enters the date and time it was installed here. The version 4
```
installation will check here to see if the pre-release packet has been installed.
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

20.14

*LAST N-V ORDER CONVERTED TOV4

20;14

POINTER TO NON-VERIFIED ORDERS FILE (#53.1)

NON-VERIFIED ORDERS(#53.1)

LAST EDITED: DEC 01, 1994
DESCRIPTION: This is the last Non-Verified order converted for use with version 4 of the Inpatient Medications package. THIS SHOULD NOT BE EDITED. Editing this could cause corrupted data and possibly cause medication administration
```
errors.
```
TECHNICAL DESCR: This is used by the Inpatient Medications to keep track the entries in the Non-Verified Orders file that are converted to the New Person file and Primary Drug. This allows the post-init conversion proces to be restarted
```
in case of an abort.  It is set in PSJIPST0.
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

20.15

*DATE NON-VERIFIED CONVERTED

20;15

DATE

INPUT TRANSFORM: S %DT="ESTX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: DEC 01, 1994

DESCRIPTION:

This is the date and time that the Inpatient Medication conversion process completed converting the Non-Verified Orders file to the New Person file and Primary Drug.  It should not be set by a user.

TECHNICAL DESCR: This is the date and time that the Inpatient Medications version 4 post-init process completed converting the Non-Verified Orders file to use the New Person file and Primary Drug. This allows the inits to be run again
```
without corrupting the data in the Non-Verified Orders file.
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

20.16

ORDERABLE ITEM CONVERSION DATE

20;16

DATE

INPUT TRANSFORM: S %DT="ESTX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: MAR 16, 1995
HELP-PROMPT: Date/Time Pharmacy Orderable Item pre-release options have completed.

20.2

DATE INITS LAST RUN

20;2

DATE

INPUT TRANSFORM: S %DT="ESTXR" D ^%DT S X=Y K:Y<1 X
LAST EDITED: SEP 10, 1989

DESCRIPTION:

This is the date and time the inits were last run for the Inpatient Medications package.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSJ

20.3

USER TO LAST RUN INITS

20;3

POINTER TO NEW PERSON FILE (#200)

NEW PERSON(#200)

LAST EDITED: JUL 08, 1991

DESCRIPTION:

This is the user who last ran the inits for the Inpatient Medications package.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSJ

20.4

SITE FOR BACKGROUND JOB

20;4

POINTER TO INPATIENT SITE FILE (#59.4)

INPATIENT SITE(#59.4)

LAST EDITED: MAR 12, 1991
HELP-PROMPT: Enter an Inpatient site whose parameters will be used by the background jobs.

DESCRIPTION: The Inpatient Medications package has background jobs that run everyday. If an Inpatient site is entered here, the background jobs site's parameters to determine such things as if labels should be created whenever a

patient's orders are discontinued due to discharge.  PLEASE NOTE that if a site has not been entered here, the background jobs will search through ALL of the Inpatient sites, and if one has labels turned on, will create

labels.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSJ

20.401

UD STATS/200 CONVERSION MARKER

20.4;1

DATE

INPUT TRANSFORM: S %DT="EX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: MAR 03, 1992

DESCRIPTION:

This is the last date in the Unit Dose Pick List Stats file that was converted from the Provider file to the New Person file.

TECHNICAL DESCR: This is a flag set by the routine PSJIPST2 as part of the post-init process. PSJIPST2 converts the Inpatient stats files from the Provider file to the New Person file. This flag contains the last date from the Unit
```
Dose Pick Lists Stats file (57.6) that was converted.  This allows the post-init to be restarted, if neccessary, from where it was stopped without degrading the data.
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

20.402

IV STATS/200 CONVERSION STATUS

20.4;2

SET

'0' FOR NOT YET STARTED;
'1' FOR MOVING CONVERTED DATA TO UTILITY;
'2' FOR MOVING CONVERTED DATA BACK TO 50.8;
'3' FOR COMPLETED;

LAST EDITED: JUL 01, 1991

DESCRIPTION:

This is the status of the process that converts the providers in the IV STATS file (50.8) from the PROVIDER file (6) to the NEW PERSON file (200).

TECHNICAL DESCR:

This flag is set by the routine PSJC200 as part of the post-init process.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

20.403

NEW PERSON CONVERSION DATE

20.4;3

DATE

INPUT TRANSFORM: S %DT="ESTX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JUN 20, 1991

DESCRIPTION:

This is the date and time that the Inpatient post-init process completed the conversion of it's data for the Provider file (6) to the New Person file (200).

TECHNICAL DESCR: This is used and set by the routine PSJC200. If there a date here, the conversion will not run. If the conversion does run, the date and time it completes is entered here. This allows the sites to rerun the inits if
```
necessary without the conversion running again (which would corrupt the data).
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

20.404

LAST N-V ORDER CONVERTED TO V4

20.4;4

POINTER TO NON-VERIFIED ORDERS FILE (#53.1)

NON-VERIFIED ORDERS(#53.1)

LAST EDITED: OCT 16, 1991
DESCRIPTION: This is the last Non-Verified order converted for use with version 4 of the Inpatient Medications package. THIS SHOULD NOT BE EDITED. Editing this could cause corrupted data and possibly cause medication administration
```
errors.
```
TECHNICAL DESCR: This is used by the Inpatient Medications to keep track the entries in the Non-Verified Orders file that are converted to the New Person file and Primary Drug. This allows the post-init conversion proces to be restarted
```
in case of an abort.  It is set in PSJIPST0.
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

20.405

DATE NON-VERIFIED CONVERTED

20.4;5

DATE

INPUT TRANSFORM: S %DT="ESTX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: AUG 08, 1991

DESCRIPTION:

This is the date and time that the Inpatient Medication conversion process completed converting the Non-Verified Orders file to the New Person file and Primary Drug.  It should not be set by a user.

TECHNICAL DESCR: This is the date and time that the Inpatient Medications version 4 post-init process completed converting the Non-Verified Orders file to use the New Person file and Primary Drug. This allows the inits to be run again
```
without corrupting the data in the Non-Verified Orders file.
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

20.406

LAST PAT CONVERTED FOR VER 4

20.4;6

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>999999999)!(X<0)!(X?.E1"."1N.N) X
LAST EDITED: OCT 14, 1991
HELP-PROMPT: Type a Number between 0 and 999999999, 0 Decimal Digits.
DESCRIPTION: This is used by the version 4 post-inits of the Inpatient Medications package to keep track of the patients whose orders have been converted to the New Person file and Primary Drug.
```
THIS IS FOR USE ONLY BY THE POST-INITS, AND SHOULD NOT BE EDITED THROUGH VA FILEMAN.
```
TECHNICAL DESCR: This is used by the routine PSJIPST0 to keep track of the last patient whose orders have been converted to the New Person file and Primary Drug, to allow the inits to be rerun if necessary. This is for version 4 of the
```
Inpatient Medications package.
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

20.407

LAST PICK LIST TO PD MARKER

20.4;7

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>999999)!(X<1)!(X?.E1"."1N.N) X
LAST EDITED: JAN 06, 1992
HELP-PROMPT: Type a Number between 1 and 999999, 0 Decimal Digits

DESCRIPTION:

This is the last pick list converted by the Inpatient Medications version 4 init process.

TECHNICAL DESCR:

This is a marker created by conversion process started by the Inpatient Medications version 4 init process.  This allows the coversion process to be restarted if necessary.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSJ

20.408

DATE PICK LISTS CONVERT TO PD

20.4;8

DATE

INPUT TRANSFORM: S %DT="ESTX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JAN 06, 1992

DESCRIPTION:

This is the date and time that a conversion process started by the Inpatient Medications version 4 inits completed converting the Unit Dose pick lists to use Primary Drug.

TECHNICAL DESCR: This is set when the process that converts the Unit DOse pick lists to use Primary Drug has completed. The conversion is started by the Inpatient Medications post-init process. This allows the inits to be re-run
```
without re-running the conversion.
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJU

20.409

ORDER SET CONVERSION MARKER

20.4;9

FREE TEXT

INPUT TRANSFORM: K:$L(X)>13!($L(X)<3)!'(X?1.6N1";"1.6N) X
LAST EDITED: JAN 08, 1992
HELP-PROMPT: Answer must be 3-13 characters in length.

DESCRIPTION:

This is the last entry in the Order Set file (53.2) to be converted to primary drug along with the last order within that entry to be converted.

TECHNICAL DESCR: This is used by the post-int process as a 'marker' when converting the Order Set file (53.2) to use primary drugs. It is in the form of: 53.2 entry number_";"_entry number of order within order set. Used by the routine
```
PSJIPST3.
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

20.41

ORDER SET CONVERSION DATE

20.4;10

DATE

INPUT TRANSFORM: S %DT="ESTXR" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JAN 08, 1992
DESCRIPTION: This is the date and time the post-init process completed the conversion of the Unit Dose Order Sets for use with Primary Drug. If the inits are rerun and the post-inits find a date here, the conversion will not be
```
attempted.  This should only be set by the post-inits, and not edited through VA FileMan.
```

TECHNICAL DESCR:

This is the date and time that the post-init process completed the conversion of the Unit Dose Order Sets to use Primary Drug.  This is accessed in the routine PSJIPST and set in the routine PSJIPST3.

DELETE AUTHORITY: ^

GROUP: PSJ

20.411

DATE UD STATS FILE CONVERTED

20.4;11

DATE

INPUT TRANSFORM: S %DT="ESTX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: MAR 03, 1992

DESCRIPTION:

This is the date the Unit Dose Pick List Stats file was converted from the Provider file to the New person file.

TECHNICAL DESCR: This is the date the Unit Dose Pick List Stats file was converted from the Provider file to the New Person file. It is set by the routine PSJIPST2. This allows the inits to run again without degrading the data in the
```
file.
```
GROUP: PSJ

20.5

DATE ATC DATA CONVERTED

20;5

DATE

INPUT TRANSFORM: S %DT="ETX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: MAR 12, 1991
HELP-PROMPT: Enter date ATC data was converted.

DESCRIPTION:

This is the date the site's ATC 212 data was converted for use with multiple machines.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSJ

20.6

DEFAULT WARD

20;6

POINTER TO INPATIENT WARD PARAMETERS FILE (#59.6)

INPATIENT WARD PARAMETERS(#59.6)

LAST EDITED: JUL 30, 1991
HELP-PROMPT: Enter the Inpatient Ward whose parameters are to be used whenever a patient is accessed who is not currently an inpatient.

DESCRIPTION:

This is the entry in the Inpatient Ward Parameter file that is used by the Inpatient Medications package whenever a patient is accessed who is not an inpatient at that time.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSJ

20.8

LAST PATIENT CONVERTED TO V4

20;8

POINTER TO PHARMACY PATIENT FILE (#55)

PHARMACY PATIENT(#55)

LAST EDITED: OCT 16, 1991
DESCRIPTION: This the last pharmacy patient whose verified Unit Dose orders were converted for use with version 4 of the Inpatient Medications package. THIS FIELD SHOULD NOT BE EDITED! Editing this field could result in corrupted
```
data which could cause medication administration errors.
```
TECHNICAL DESCR: This is set by the routine PSJIPST0, which converts all Pharmacy Patients' active Unit Dose orders to the New Person file and Primary Drug. After a patient's orders have been converted, the patient is entered here.
```
This allows the process to be restarted, if necessary.
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

20.9

UD STATS/200 CONVERSION STATUS

20;9

SET

'0' FOR NOT YET STARTED;
'1' FOR MOVING CONVERTED DATA TO UTILITY;
'2' FOR MOVING CONVERTED DATA BACK TO 57.6;
'3' FOR COMPLETED;

LAST EDITED: JUL 01, 1991

DESCRIPTION:

This is the status of the process that converts the providers in the UNIT DOSE PICK LIST STATS (57.6) from the PROVIDER file (6) to the NEW PERSON file (200).

TECHNICAL DESCR: This flag is set by the routine PSJC200 as part of the post-init process. PSJC200 converts the all of the Inpatient Medication data from the PROVIDER file (6) to the NEW PERSON file (200). This flag allows the process
```
to be run again if necessary without corrupting the data in the UNIT DOSE PICK LIST STATS file (57.6).
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```

21

NON-FORMULARY MESSAGE

21;0

WORD-PROCESSING #59.721

DESCRIPTION: This is a message that will be shown to non-pharmacists when they order drugs for a patient that are not currently stocked by the pharmacy. This is typically a warning and/or a procedure the non-pharmacist must follow
```
before pharmacy will dispense the non-formulary drug.  This message will show exactly as entered here.
```
TECHNICAL DESCR: This allows the pharmacy to provide a message to non-pharmacy personnel when they order a non-formulary drug for a patient. The message usually outlines the procedure that the user needs to follow before pharmacy will
```
dispense the non-formulary drug.
```
GROUP: PS

22

WARD ACTIONS

22;0

POINTER Multiple #59.722

59.722

DESCRIPTION:

These are the actions that the Inpatient Medications will take on a patient's order whenever the patient is transferred between wards.

TECHNICAL DESCR: This allows the site to determine if a patient's orders should be cancelled when the patient is transferred to another ward. This allows the site to make this determination on a ward by ward basis. This is used by the
```
PSJADT routines.
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

23

D/C ON SERVICE TRANSFER

23;0

SET Multiple #59.723

59.723

LAST EDITED: JUL 09, 1992

DESCRIPTION:

A patient's Inpatient Medications orders will be cancelled whenever the patient is transferred between services entered here.

TECHNICAL DESCR: This allows the site to determine if a patient's orders should be cancelled when the patient is transferred to another service. This allows the site to make this determination on a service by service basis. The service
```
that the patient resides is determined by the ward that the patient resides, using the SERVICE field of the WARD LOCATION file.  This is used by the PSJADT routines.
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

25

INPATIENT ORDER NUMBER

25;E1,245

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>999999999999)!(X<0)!(X?.E1"."1N.N) X
LAST EDITED: APR 10, 1992
HELP-PROMPT: Type a Number between 0 and 999999999999, 0 Decimal Digits.
DESCRIPTION: This is used to keep track of the internal order number of Inpatient Medications and IV Fluid orders placed in the NON-VERIFIED ORDERS file (53.1). This is used to provide each order with a unique internal number. This
```
should not be edited through the VA FileMan.
```

TECHNICAL DESCR:

This is used to produce unique internal entry numbers for orders placed into the NON-VERIFIED ORDERS file (#53.1).  It is used in the routine PSGOETO.

GROUP: PSJ

25.1

DATE 5.0 UD VER CONV FINISHED

20.5;1

DATE

INPUT TRANSFORM: S %DT="EST" D ^%DT S X=Y K:Y<1 X
LAST EDITED: FEB 20, 1997

DESCRIPTION:

This field tracks the date the version 5.0 Unit Dose Verification conversion finished.

TECHNICAL DESCR:

This field tracks the date the version 5.0 Unit Dose Verification conversion finished.

25.2

DATE 5.0 CONVERSION COMPLETED

20.5;2

DATE

INPUT TRANSFORM: S %DT="ETX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: OCT 09, 1995

DESCRIPTION:

This is the date the 5.0 postinit process completed the conversion for version 5.0.

TECHNICAL DESCR:

This is set when the 5.0 postinit process completes converting existing Unit Dose orders to the new (5.0) format.

25.3

DATE 5.0 PICK LIST CONV FINISH

20.5;3

DATE

INPUT TRANSFORM: S %DT="EST" D ^%DT S X=Y K:Y<1 X
LAST EDITED: FEB 20, 1997

DESCRIPTION:

This field will track when the version 5.0 Pick List Conversion finished.

TECHNICAL DESCR:

This field will track when the version 5.0 Pick List Conversion finished.

25.4

DATE 5.0 ORDER SET CONV FINISH

20.5;4

DATE

INPUT TRANSFORM: S %DT="EST" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JUN 09, 1997

DESCRIPTION:

Date the S. Order set conversion finished for version 5.0.

TECHNICAL DESCR:

Date the S. Order set conversion finished for version 5.0.

26

PRINT 6 BLOCKS FOR THE PRN MAR

26;1

SET

'1' FOR YES;

LAST EDITED: DEC 16, 1993
HELP-PROMPT: Enter 1 to allow 6 blocks to be printed for the ONE-TIME/PRN orders on the 7/14 DAY MAR ONE-TIME/PRN SHEET.

DESCRIPTION:

This field is used to indicate if 4 or 6 blocks are to be used for ONE-TIME/PRN orders on the 7/14 DAY MAR ONE-TIME/PRN SHEET. The 7/14 DAY MAR ONE-TIME/PRN SHEET will print 4 blocks if this field is not set to "YES".

GROUP: PSJ

26.2

ATC SORT PARAMETER

26;2

SET

'0' FOR ATC MNEMONIC;
'1' FOR ADMIN TIME;

LAST EDITED: FEB 24, 1994
HELP-PROMPT: Enter '0' to send Pick List to ATC by drug, '1' for admin time.

DESCRIPTION:

This parameter allows sending of the Pick List to the ATC machine by ATC Mnemonic within Patient (as in versions of Inpatient Medications thru 4.0), or else by admin time within patient.

TECHNICAL DESCR:

This SET OF CODES determines which routine is called by the SEND PICK LIST TO ATC option in Unit Dose.

26.3

PRINT DIET ABBR LABEL ON MAR

26;3

SET

'1' FOR YES;

LAST EDITED: MAY 27, 1997
HELP-PROMPT: Enter 1 or Yes, the Dietetics Abbreviated Label will print on the MAR

DESCRIPTION:

If this field contains a 1 or Yes, the Dietetics Abbreviated Label will be printed on the MAR

26.4

MAR SORT

26;4

SET

'0' FOR Sort by order's Schedule Type and then Medication Names.;
'1' FOR Sort by order's Medication Names.;

LAST EDITED: OCT 08, 1998

DESCRIPTION: If enter 0, the MAR will sort by the order's Schedule Type* and then

medication names.

If enter 1, the MAR will sort by the order's medication names.

* Schedule Type is sort based on the following orders:

Continuous MAR                      One-Time/PRN MAR

--------------                      ----------------

Unit dose order:                    Unit dose orders:

Continuous                         One-time

Fill in Request                    PRN

IV Orders:                          IV orders:

Piggyback or Syringe type          One-time

Admixture type                     PRN

Hyperal type                    Acknowledged Pending PRN orders

Chemo type

Acknowledged Pending orders:

Inpatient Meds

IV fluids

26.5

CALC UNITS NEEDED PRN ORDERS

26;5

SET

'1' FOR YES;

LAST EDITED: FEB 05, 2001
HELP-PROMPT: Enter a 1 if you would like to have the UNITS NEEDED calculated for PRN orders on the Pick List.

DESCRIPTION:

This field controls whether or not UNITS NEEDED will be calculated for orders with PRN in the schedule field.  This information will show on the Pick List if this field is set to 1.

26.6

DAYS UNTIL STOP FOR ONE-TIME

26;6

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>30)!(X<1)!(X?.E1"."1N.N) X
LAST EDITED: SEP 05, 2001
HELP-PROMPT: Type a Number between 1 and 30, indicating the number of days a one-time order should last if there is no ward parameter defined.

26.7

ROUND ATC PICK LIST UNITS

26;7

SET

'1' FOR YES;
'0' FOR NO;

LAST EDITED: AUG 14, 2003
HELP-PROMPT: Enter YES if you wish to round fractional doses when sending the pick list to the ATC.

DESCRIPTION:

The purpose of this field is to allow rounding of fractional doses to be sent by the pick list to the ATC.

27

PRIORITIES FOR PENDING NOTIFY

27;1

SET

'S' FOR STAT;
'SA' FOR STAT/ASAP;
'SAN' FOR STAT/ASAP/NOW;
'A' FOR ASAP;
'AN' FOR ASAP/NOW;
'N' FOR NOW;
'SN' FOR STAT/NOW;

LAST EDITED: AUG 09, 2005

DESCRIPTION: Enter the priorities of STAT, ASAP, or the schedule of NOW, or any combination of the three to be used to send a notification of orders with these priorities to the PSJ STAT NOW PENDING ORDER mail group.

This field is also used as the default control for field 27.1 in file 59.7, PRIORITIES FOR ACTIVE NOTIFY and for field 6 in file 59.6 PRIORITIES FOR NOTIFICATION.  If these two fields are blank, then they will use the

setting defined here.

27.1

PRIORITIES FOR ACTIVE NOTIFY

27;2

SET

'S' FOR STAT;
'SA' FOR STAT/ASAP;
'SAN' FOR STAT/ASAP/NOW;
'A' FOR ASAP;
'AN' FOR ASAP/NOW;
'N' FOR NOW;
'SN' FOR STAT/NOW;

LAST EDITED: AUG 09, 2005

DESCRIPTION:

Enter the priorities of STAT, ASAP, or the schedule of NOW, or any combination the three to be used to send a notification of orders with these priorities to the PSJ STAT NOW ACTIVE ORDER mail group.

30.1

DATE IV ORDERS CONVERTED

30;1

DATE

INPUT TRANSFORM: S %DT="EST" D ^%DT S X=Y K:Y<1 X
LAST EDITED: OCT 11, 1991

DESCRIPTION:

This is the date existing IV orders were converted to look at the new person file, and linked to the appropriate protocols for use in Inpatient Medications version 4.0.

TECHNICAL DESCR:

This is set when the order conversion has completed. When the inits are run, this field is checked, and if a date is found the conversion will not be run.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSJ

30.2

LAST PATIENT CONVERTED (IV)

30;2

POINTER TO PHARMACY PATIENT FILE (#55)

PHARMACY PATIENT(#55)

LAST EDITED: OCT 15, 1991

DESCRIPTION:

This is the last pharmacy patient whose orders were converted to the new person file, and to the new format required by version 4.0. If this field is edited, data within inpatient medication orders may be corrupted.

TECHNICAL DESCR: This is set by PSJIPST1, which converts all IV orders to the new person file (200), and to the format required by Inpatient Medications 4.0. After all of a patient's orders have been processed, the patient is entered
```
here.  This allows the conversion to be restarted if necessary.
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

31

DAYS TO RETAIN IV STATISTICS

31;1

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>2000)!(X<100)!(X?.E1"."1N.N) X
LAST EDITED: MAY 11, 1992
HELP-PROMPT: Type a Number between 100 and 2000, 0 Decimal Digits

DESCRIPTION:

This is used to allow the site to specify the number of days to keep data in the IV STATS file (50.8). Information may be retained in the IV STATS file for 100 to 2000 days.

TECHNICAL DESCR:

This is used to allow the site to specify the number of days to keep data in the IV STATS vile (50.8). If no value is found for this field, the IV STATS data will be retained for 100 days.

GROUP: PSJI

32

IV IDENTIFIER

31;2

FREE TEXT

INPUT TRANSFORM: K:$L(X)>30!($L(X)<1) X
LAST EDITED: FEB 27, 1995
HELP-PROMPT: Answer must be 1-30 characters in length.

34

EXPIRED IV TIME LIMIT

31;4

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>24)!(X<0)!(X?.E1"."1.N) X
LAST EDITED: JUL 29, 2004
HELP-PROMPT: Type the Number of Hours between 0 and 24 that continuous IV orders may be renewed after expiring

DESCRIPTION:

The maximum number of hours after a continuous IV order expires that it may still be renewed

40

DEFAULT OUTPATIENT SITE

40;1

POINTER TO OUTPATIENT SITE FILE (#59)

OUTPATIENT SITE(#59)

LAST EDITED: OCT 20, 1989
HELP-PROMPT: Enter the name of the site which will be used for OE/RR

DESCRIPTION:

The outpatient site (and parameters) which will be used for ward order entry.  An entry in this field will bypass the site selection prompt when entering outpatient from OE/RR.

DELETE AUTHORITY: #

WRITE AUTHORITY:  #

READ AUTHORITY:   #

SOURCE OF DATA:   Various pharmacy data

GROUP: PSO

40.1

ADMISSION CANCEL OF RXS

40.1;1

SET

'1' FOR YES;
'0' FOR NO;

LAST EDITED: NOV 23, 1992

DESCRIPTION:

This field is used to determine if outpatient medication will be cancelled after 72 hours of an admission to the medical center.

TECHNICAL DESCR:
```
set of codes
```
GROUP: PSO

40.11

INTERDIVISIONAL PROCESSING

40.1;2

SET

'1' FOR YES;

LAST EDITED: MAY 11, 1992
HELP-PROMPT: Enter 'Yes' if interdivisional processing is to occur.

DESCRIPTION:

This field is used to indicate if interdivisional processing is to occur.

TECHNICAL DESCR:
```
set of codes.
```
GROUP: PSO

40.12

DIVISION PROMPT ASKED

40.1;3

SET

'1' FOR YES;

LAST EDITED: MAY 11, 1992
HELP-PROMPT: Enter 'Yes' if division prompt is to be asked.

DESCRIPTION:

This field is used to indicate if the 'Division' prompt is to be asked.

TECHNICAL DESCR:
```
set of codes.
```
GROUP: PSO

40.13

REFILL/RENEW DIVISION

40.1;4

POINTER TO OUTPATIENT SITE FILE (#59)

OUTPATIENT SITE(#59)

LAST EDITED: SEP 07, 1989
HELP-PROMPT: Enter Division.

DESCRIPTION:

This field is used to indicate the refill/renew division for multi divisional sites.

TECHNICAL DESCR:
```
pointer.
```
GROUP: PSO
```
UNEDITABLE
```

40.14

DAYS PRINTED RX STAYS IN 52.5

40.1;5

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>90)!(X<7)!(X?.E1"."1N.N) X
LAST EDITED: MAR 18, 1993
HELP-PROMPT: Enter from 7 to 90 days printed Rx's are to remain in suspense during the purge option.

DESCRIPTION:

This field contains the number of days printed prescriptions are to remain in the RX SUSPENSE file when running the Delete From Suspense File option. The number of days to remain may be from 7 to 90.

TECHNICAL DESCR:

The Delete Printed Prescriptions option in the Suspense menu uses this data.

GROUP: PSO

40.15

POLYPHARMACY W/ACTION PROFILE

40.1;6

SET

'1' FOR YES;

LAST EDITED: APR 23, 1996
HELP-PROMPT: Enter '1' or Yes to indicate if a polypharmacy report is to print with action profiles.

DESCRIPTION:

This field is used to determine if a polypharmacy report prints with action profile across all divisions.

TECHNICAL DESCR:
```
set of codes.
```
GROUP: PSO

40.16

AUTOMATE CPRS REFILL

40.1;7

SET

'0' FOR NO;
'1' FOR YES;

LAST EDITED: JUN 02, 2008
HELP-PROMPT: Enter Y to process CPRS refill automatically or N to continue the current manual process.
DESCRIPTION: This field should be marked "YES" if refill requests from CPRS are to be processed automatically and filed in the PRESCRIPTION file (#52) and placed on Suspense. To continue the current process of filing in the PENDING
```
OUTPATIENT ORDERS fie (#52.41) for manual processing, this field should be marked "NO".
```

TECHNICAL DESCR:

Set of codes. "YES" to process CPRS refill automatically and "NO" to continue the current manual process.

40.19

EXEMPT WARD FROM AUTOCANCEL

40.19;0

POINTER Multiple #59.701

59.701

DESCRIPTION:

For WARD LOCATIONS entered here, prescriptions for patients on these wards will not be canceled by the Autocancel RX's on Admission Outpatient Pharmacy system job.

TECHNICAL DESCR:

This is a pointer to the WARD LOCATION (#42) File.

40.2

USE OF ANOTHER LANGUAGE

40.2;1

SET

'1' FOR YES;
'0' FOR NO;

LAST EDITED: SEP 16, 2002
HELP-PROMPT: Enter 1 or Yes if another language translations is used.

DESCRIPTION:

This field is used to indicate if another language translations are used.

TECHNICAL DESCR:
```
set of codes.
```
GROUP: PSO

40.21

SECONDS

40.2;2

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'SECOND'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'SECOND'.

TECHNICAL DESCR:
```
Free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","SECONDS",X)=""

2)= K ^PS(59.7,"AOTH","SECONDS",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.22

MINUTES

40.2;3

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'MINUTES'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'MINUTES'.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","MINUTES",X)=""

2)= K ^PS(59.7,"AOTH","MINUTES",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.23

DAYS

40.2;4

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'DAYS'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'DAYS'.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","DAYS",X)=""

2)= K ^PS(59.7,"AOTH","DAYS",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.24

WEEKS

40.2;5

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'WEEKS'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'WEEKS'.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","WEEKS",X)=""

2)= K ^PS(59.7,"AOTH","WEEKS",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.25

HOURS

40.2;6

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'HOURS'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'HOURS'.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","HOURS",X)=""

2)= K ^PS(59.7,"AOTH","HOURS",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.26

MONTHS

40.2;7

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'MONTHS'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'MONTHS'.

TECHNICAL DESCR:
```
free text
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","MONTHS",X)=""

2)= K ^PS(59.7,"AOTH","MONTHS",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.27

AND

40.2;8

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'AND'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'AND'.

TECHNICAL DESCR:
```
free text
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","AND",X)=""

2)= K ^PS(59.7,"AOTH","AND",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.28

THEN

40.2;9

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'THEN'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'THEN'.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","THEN",X)=""

2)= K ^PS(59.7,"AOTH","THEN",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.29

EXCEPT

40.2;10

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: OCT 10, 2002
HELP-PROMPT: Enter the other language translation of the word 'EXCEPT'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'EXCEPT'.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","EXCEPT",X)=""

2)= K ^PS(59.7,"AOTH","EXCEPT",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.3

ONE

40.3;1

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'ONE'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'ONE'.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","ONE",X)=""

2)= K ^PS(59.7,"AOTH","ONE",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.31

TWO

40.3;2

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'TWO'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'TWO'.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","TWO",X)=""

2)= K ^PS(59.7,"AOTH","TWO",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.32

THREE

40.3;3

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'THREE'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'THREE'.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","THREE",X)=""

2)= K ^PS(59.7,"AOTH","THREE",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.33

FOUR

40.3;4

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'FOUR'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'FOUR'.

TECHNICAL DESCR:
```
free text
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","FOUR",X)=""

2)= K ^PS(59.7,"AOTH","FOUR",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.34

FIVE

40.3;5

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'FIVE'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'FIVE'.

TECHNICAL DESCR:
```
free text
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","FIVE",X)=""

2)= K ^PS(59.7,"AOTH","FIVE",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.35

SIX

40.3;6

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'SIX'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'SIX'.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","SIX",X)=""

2)= K ^PS(59.7,"AOTH","SIX",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.36

SEVEN

40.3;7

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'SEVEN'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'SEVEN'.

TECHNICAL DESCR:
```
free text
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","SEVEN",X)=""

2)= K ^PS(59.7,"AOTH","SEVEN",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.37

EIGHT

40.3;8

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: JAN 23, 2003
HELP-PROMPT: Enter the other language translation of the word 'EIGHT'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'EIGHT'.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","EIGHT",X)=""

2)= K ^PS(59.7,"AOTH","EIGHT",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.38

NINE

40.3;9

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'NINE'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'NINE'.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","NINE",X)=""

2)= K ^PS(59.7,"AOTH","NINE",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.39

TEN

40.3;10

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'TEN'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'TEN'.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","TEN",X)=""

2)= K ^PS(59.7,"AOTH","TEN",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.4

ONE-HALF

40.3;11

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'ONE-HALF'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'ONE-HALF'.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","ONE-HALF",X)=""

2)= K ^PS(59.7,"AOTH","ONE-HALF",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.41

ONE-FOURTH

40.3;12

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'ONE-FOURTH'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'ONE-FOURTH'.

TECHNICAL DESCR:
```
free text
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","ONE-FOURTH",X)=""

2)= K ^PS(59.7,"AOTH","ONE-FOURTH",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.42

ONE-THIRD

40.3;13

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'ONE-THIRD'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'ONE-THIRD'.

TECHNICAL DESCR:
```
free text
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","ONE-THIRD",X)=""

2)= K ^PS(59.7,"AOTH","ONE-THIRD",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.43

TWO-THIRDS

40.3;14

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'TWO-THIRDS'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'TWO-THIRDS'.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","TWO-THIRDS",X)=""

2)= K ^PS(59.7,"AOTH","TWO-THIRDS",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.44

THREE-FOURTHS

40.3;15

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 12, 2001
HELP-PROMPT: Enter the other language translation of the word 'THREE-FOURTHS'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'THREE-FOURTHS'.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","THREE-FOURTHS",X)=""

2)= K ^PS(59.7,"AOTH","THREE-FOURTHS",X)

3)= Do not delete!

This xref is used to find the translation for other languages that prints on Rx labels.

40.45

FOR

40.2;11

FREE TEXT

INPUT TRANSFORM: K:$L(X)>15!($L(X)<1) X
LAST EDITED: SEP 24, 2001
HELP-PROMPT: Enter the other language translation of the word 'FOR'. Answer must be 1-15 characters in length.

DESCRIPTION:

This field is used to store the other language translation of the word 'FOR.

TECHNICAL DESCR:
```
free text.
```
GROUP: PSO

CROSS-REFERENCE: 59.7^AOTH^MUMPS

1)= S ^PS(59.7,"AOTH","FOR",X)=""

2)= K ^PS(59.7,"AOTH","FOR",X)

3)= Do not delete.

This xref is used to do a quick lookup for translation.

41

LAST RX PRE V6

49.99;5

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>1000000000)!(X<0)!(X?.E1"."1N.N) X
LAST EDITED: NOV 27, 1992
HELP-PROMPT: This data is not entered through file manager.

DESCRIPTION: NOT IN USE FOR VERSION 7.0

This field will be used during the installation of version 6.0.  This field will hold the last prescription number file #52.  This number will be used to indicated the last prescription to be converted if a restart is

needed.

TECHNICAL DESCR:

numeric

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSO
```
UNEDITABLE
```

42

TOTAL RX'S PURGED TO DATE

40.01;1

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>999999)!(X<0)!(X?.E1"."1N.N) X
LAST EDITED: NOV 01, 1988
HELP-PROMPT: Type a Number between 0 and 999999, 0 Decimal Digits
DESCRIPTION:
```
This field is currently not in use.
```
TECHNICAL DESCR:
```
numeric
```
GROUP: PSO

46.1

TRANSMISSION START DATE

46;1

DATE

INPUT TRANSFORM: S %DT="EX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: AUG 22, 2003

DESCRIPTION:

This is the start date of the most recent HL7 extract of patients in the TPB ELIGIBILITY file (#52.91).

46.2

TRANSMISSION END DATE

46;2

DATE

INPUT TRANSFORM: S %DT="EX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: AUG 22, 2003

DESCRIPTION:

This is the end date of the most recent HL7 extract of patients in the TPB ELIGIBILITY file (#52.91).

46.3

BATCH CONTROL ID

46;3

FREE TEXT

INPUT TRANSFORM: K:$L(X)>20!($L(X)<1) X
LAST EDITED: AUG 22, 2003
HELP-PROMPT: Answer must be 1-20 characters in length.

DESCRIPTION:

This is the Batch Control ID of the most recent HL7 extract of patients in the TPB ELIGIBILITY file (#52.91).

46.4

NUMBER OF MSH COUNT

46;4

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>999999999999)!(X<0)!(X?.E1"."1N.N) X
LAST EDITED: AUG 22, 2003
HELP-PROMPT: Type a Number between 0 and 999999999999, 0 Decimal Digits

DESCRIPTION:

This is the total count of MSH headers of the most recent HL7 extract of patients in the TPB ELIGIBILITY file (#52.91).

46.5

NUMBER OF LINES COUNT

46;5

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>999999999999)!(X<0)!(X?.E1"."1N.N) X
LAST EDITED: AUG 22, 2003
HELP-PROMPT: Type a Number between 0 and 999999999999, 0 Decimal Digits

DESCRIPTION:

This is the total count of the number of lines from the most recent HL7 extract of patients in the TPB ELIGIBILITY file (#52.91).

47

SCRIPTALK PRINT DEVICE MAPPING

47;0

POINTER Multiple #59.747

59.747

DESCRIPTION:

This multiple adds the capability to tie a ScripTalk printer to regular Pharmacy label printer(s) to control where the ScripTalk labels print for multi-divisions.

TECHNICAL DESCR: Multiple print devices may be mapped to a ScripTalk printer. If no data is defined in this multiple, the ScripTalk printer tied to the division will be used.

The use of this multiple builds upon existing ScripTalk functionality, so a divisional ScripTalk device must be defined for the mapped device functionality to work properly and to have a default device defined.

49.95

DATE AUTO-EXPIRE COMPLETED

49.99;8

DATE

INPUT TRANSFORM: S %DT="E" D ^%DT S X=Y K:X<1 X
LAST EDITED: MAY 18, 2007
HELP-PROMPT: Last Date Auto-Expire Processed

DESCRIPTION:

This is the last date that the nightly auto-expire processed. Processing will continue from this date the next time the job runs.

TECHNICAL DESCR:

This is the last date that the nightly auto-expire processed. Processing will continue from this date the next time the job runs and will expire prescriptions with expiration dates up to and including DT-1.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

49.96

DATE V7 INSTALLED

49.99;4

DATE

INPUT TRANSFORM: S %DT="EX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JUL 07, 1995
HELP-PROMPT: Data not entered through Fileman.
DESCRIPTION: This filed is used to indicate the date version 7.0 of OP was installed.

TECHNICAL DESCR:

date

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSO
```
UNEDITABLE
```

49.97

LAST RX CONVERTED

49.99;3

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>1000000000)!(X<0)!(X?.E1"."1N.N) X
LAST EDITED: NOV 24, 1992
HELP-PROMPT: This data is not entered through file manager.

DESCRIPTION: THIS FIELD IS NOT IN US FOR VERSION 7.0.

This is simply a scratch area which holds the internal entry number of the last entry in 52 for which the post init conversion for V6 has been completed.

TECHNICAL DESCR:

Numeric

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSO
```
UNEDITABLE
```

49.98

DATE OP 6 INSTALLED

49.99;2

DATE

INPUT TRANSFORM: S %DT="EX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JUL 07, 1995
HELP-PROMPT: Enter date installation was done.

DESCRIPTION:

This field is used to indicate the date OP v6 was installed.  This field will also be used to deteminewhat Rxs are eligible for release.

TECHNICAL DESCR:

date

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSO
```
UNEDITABLE
```

49.981

V7 POST BACKGROUND START

49.99;7

DATE

************************REQUIRED FIELD************************

INPUT TRANSFORM: S %DT="ETXR" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JUL 07, 1995
HELP-PROMPT: Data sholud not be entered through file manager.
DESCRIPTION: This field is used to indicate date/time background job started.

TECHNICAL DESCR:

date/time

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

SOURCE OF DATA:   PSOPOST

GROUP: PSO
```
UNEDITABLE
```

49.982

V7 POST BACKGROUND STOP

49.99;6

DATE

************************REQUIRED FIELD************************

INPUT TRANSFORM: S %DT="ETXR" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JUL 07, 1995
HELP-PROMPT: Data not entered through Fileman.
DESCRIPTION: This field is used to indicate the date/time the v7 post background ran to completion.

TECHNICAL DESCR:

date/time

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

SOURCE OF DATA:   routine PSOPOST

GROUP: PSO
```
UNEDITABLE
```

49.99

OUTPATIENT VERSION

49.99;1

NUMBER

************************REQUIRED FIELD************************

INPUT TRANSFORM: K:+X'=X!(X>99)!(X<1)!(X?.E1"."3N.N) X
LAST EDITED: OCT 12, 1988
HELP-PROMPT: Type a Number between 1 and 99, 2 Decimal Digits

DESCRIPTION:

This field is used to indicate the current version of the Outpatient Pharmacy package installed.

TECHNICAL DESCR:

numeric

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSO
```
UNEDITABLE
```

50

AR/WS AMIS UPDATE

50;1

DATE

INPUT TRANSFORM: S %DT="ESTX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: FEB 09, 1990

DESCRIPTION:

This field contains the Date/Time that the nightly job to update the AR/WS Stats File (#58.5) was last run to completion.  This field is set automatically when the nightly job is run.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSGW

59.01

AR/WS VERSION

59.99;1

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>999)!(X<1)!(X?.E1"."4N.N) X
LAST EDITED: JUN 20, 1989
HELP-PROMPT: Type a Number between 1 and 999, 3 Decimal Digits

DESCRIPTION:

This field will contain the current version of the AR/WS package.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSGW

59.02

DATE INSTALLED

59.99;2

DATE

INPUT TRANSFORM: S %DT="EX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JUN 20, 1989
HELP-PROMPT: Enter Date the current AR/WS version was installed.

DESCRIPTION:

This field will contain the date the current version of AR/WS was installed.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSGW

59.1

BACKORDER CONVERSION

59.99;3

DATE

INPUT TRANSFORM: S %DT="EX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JUN 20, 1989
HELP-PROMPT: Enter Date the BACKORDER CONVERSION was completed.

DESCRIPTION:

This field will contain the date the BACKORDER CONVERSION for AR/WS V2.04 was completed.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSGW

59.2

MULTI-DIVISION CONVERSION

59.99;4

DATE

INPUT TRANSFORM: S %DT="EX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JUN 20, 1989
HELP-PROMPT: Enter Date the MULTI-DIVISION CONVERSION was completed.

DESCRIPTION:

This field will contain the date the MULTI-DIVISION CONVERSION for AR/WS V2.04 was completed.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSGW

59.3

WARD (for %) CONVERSION

59.99;5

DATE

INPUT TRANSFORM: S %DT="EX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: OCT 02, 1989
HELP-PROMPT: Enter Date the WARD (for %) CONVERSION was completed

DESCRIPTION:

This field contains the date the WARD (for %) pointer conversion for AR/WS V2.04 was completed.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSGW

59.4

RETURN REASON CONVERSION

59.99;6

DATE

INPUT TRANSFORM: S %DT="EX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JUL 09, 1990
HELP-PROMPT: Enter Date the RETURN REASON CONVERSION was completed.

DESCRIPTION:

This field will contain the date the RETURN REASON CONVERSION for AR/WS V2.2 was completed.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSGW

60.02

*LAST PAT CONVERTED FOR VER 4

60;2

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>999999999)!(X<0)!(X?.E1"."1N.N) X
LAST EDITED: DEC 01, 1994
HELP-PROMPT: Type a Number between 0 and 999999999, 0 Decimal Digits.
DESCRIPTION: This is used by the version 4 post-inits of the Inpatient Medications package to keep track of the patients whose orders have been converted to the New Person file and Primary Drug.
```
THIS IS FOR USE ONLY BY THE POST-INITS, AND SHOULD NOT BE EDITED THROUGH VA FILEMAN.
```
TECHNICAL DESCR: This is used by the routine PSJIPST0 to keep track of the last patient whose orders have been converted to the New Person file and Primary Drug, to allow the inits to be rerun if necessary. This is for version 4 of the
```
Inpatient Medications package.
```
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

60.1

*BAXTER ATC 212 DEVICE

60;1

FREE TEXT

INPUT TRANSFORM: K:$L(X)>20!($L(X)<1) X D:$D(X) ENDLP^PSSDDUT
LAST EDITED: JUN 23, 1997
HELP-PROMPT: Enter the device the ATC is listed as in the device file.

DESCRIPTION:

This is the name of the device from the DEVICE file used for the Baxter ATC dispensing machine.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSJU
NOTES: XXXX--CAN'T BE ALTERED EXCEPT BY PROGRAMMER

61.2

DAYS NEW LABELS LAST

61;2

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>35)!(X<0)!(X?.E1"."1N.N) X
LAST EDITED: MAR 12, 1991
HELP-PROMPT: Type a Number between 0 and 35, 0 Decimal Digits.

DESCRIPTION:

This is number of days that new labels created by the Unit Dose Medications package are to last.

EXECUTABLE HELP: D LBLS^PSSDDUT2
```
DELETE AUTHORITY: ^
```
```
WRITE AUTHORITY:  ^
```
GROUP: PSJ

63.51

PICK LIST AUTO-PURGE

63.5;1

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>90)!(X<1)!(X?.E1"."1N.N) X
LAST EDITED: SEP 28, 1989
HELP-PROMPT: Type a Number between 1 and 90, 0 Decimal Digits.

DESCRIPTION: This is the number of days that the computer will hold Unit Dose Pick Lists that have been filed away. If an entry is found here by the daily background job, the job will delete those pick lists that have been filed

away and have existed longer than the number of days specified here.  Enter a number here to start the auto-purge the next time daily background job runs.  Delete any entry made here to stop the auto-purge.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSJU

63.52

DATE/TIME AUTO-PURGE EDITED

63.5;2

DATE

INPUT TRANSFORM: S %DT="ESTXR" D ^%DT S X=Y K:Y<1 X
LAST EDITED: SEP 08, 1989

DESCRIPTION:

This is the date and time the PICK LIST AUTO-PURGE was edited.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSJU

63.53

USER LAST EDITING AUTO-PURGE

63.5;3

POINTER TO NEW PERSON FILE (#200)

NEW PERSON(#200)

LAST EDITED: JUL 08, 1991

DESCRIPTION:

This is the user who last edited the PICK LIST AUTO-PURGE field.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSJU

63.54

DATE PICK LIST LAST FILED AWAY

63.5;4

DATE

INPUT TRANSFORM: S %DT="ESTXR" D ^%DT S X=Y K:Y<1 X
LAST EDITED: SEP 26, 1989

DESCRIPTION:

This is the date the job to file away pick lists was last run.

DELETE AUTHORITY: ^

WRITE AUTHORITY:  ^

GROUP: PSJU

64

PARAM FILE CONVERSION STATUS

20.4;12

SET

'0' FOR NOT YET STARTED;
'1' FOR MOVING DATA TO TMP;
'2' FOR MOVING DATA BACK TO 53.45.;
'3' FOR COMPLETED;

LAST EDITED: NOV 10, 1992

DESCRIPTION:

This is the status of the conversion of the 53.45 file to DINUM format.

TECHNICAL DESCR: This flag is used to determine the progress of the conversion of the INPATIENT USER PARAMETERS file (53.45) to DINUM format. This allows the conversion to be restarted at the point it terminated if the process halts
```
before it has completed.
```
GROUP: PSJ

65

PICK LIST CONVERSION DATE

20.4;13

DATE

INPUT TRANSFORM: S %DT="E" D ^%DT S X=Y K:Y<1 X
LAST EDITED: DEC 07, 1993
HELP-PROMPT: This is the date the Inpatient Meds V4.5 Pick List conversion completed.

DESCRIPTION:

This is the date the Inpatient Meds V4.5 conversion of existing pick list data to the new VA FileMan compatible format completed.

TECHNICAL DESCR:

This is set when the Inpatient Meds 4.5 pick list conversion  completes.

66

V4.5 PICK LIST CONVERT MARKER

20.4;14

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>99999999)!(X<0)!(X?.E1"."1N.N) X
LAST EDITED: DEC 07, 1993
HELP-PROMPT: Type a Number between 0 and 99999999, 0 Decimal Digits

DESCRIPTION:

This is the IEN of the last pick list to be converted to the VA FileMan compatible file structure exported with version 4.5 of Inpatient Medications.

TECHNICAL DESCR:

This stores the IEN of the last pick list converted to the new format. This field is used to allow the conversion process to start with the correct pick list if the conversion is interupted and then restarted.

67

V4.5 PICK LIST CONVERT STATUS

20.4;15

SET

'1' FOR MOVING DATA TO XTMP;
'2' FOR MOVING DATA FROM XTMP TO PS(53.5;

LAST EDITED: DEC 07, 1993

DESCRIPTION:

This is used to allow the pick list conversion to be restarted at the correct conversion phase if the process must be restarted.

70

LAST DRUG LINKED

70;1

POINTER TO DRUG FILE (#50)

DRUG(#50)

LAST EDITED: APR 10, 1992

DESCRIPTION:

When using the PSAUNL option to link the Drug/Item file, the last drug linked will be stored here and offered as a point at which to resume the loop upon re-entry.

TECHNICAL DESCR:

Used by ^PSAUNL to store the entry from #50 at which the user stopped.

70.1

LAST DRUG LINKER

70;2

POINTER TO NEW PERSON FILE (#200)

NEW PERSON(#200)

LAST EDITED: APR 10, 1992

DESCRIPTION:

The person using the PSAUNL option when the LAST DRUG LINKED value is stored.

TECHNICAL DESCR:

The DUZ of the person using ^PSAUNL to link #50 - #441.

70.2

LAST DRUG LINK DATE

70;3

DATE

INPUT TRANSFORM: S %DT="ETX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: APR 10, 1992

DESCRIPTION:

The date/time that the PSAUNL option was last used and the LAST DRUG LINKED value was entered.

TECHNICAL DESCR:

When ^PSAUNL last entered DRUG LINKED and LINKER values.

71

DATE V2 CS/DA CONVERSION

70;4

DATE

INPUT TRANSFORM: S %DT="EX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: MAR 01, 1993
HELP-PROMPT: Enter date that the post-inits for Version 2.0 of Controlled Substances or Drug Accountability were completed.

DESCRIPTION:

This field will contain the date that the post-inits were completed for Version 2.0 of Controlled Substances or Drug Accountability.

TECHNICAL DESCR: Version 2.0 of Controlled Substances and Drug Accountability will update the DRUG ACCOUNTABILITY STATS (#58.8) file with a new multiple pointer to the GENERIC INVENTORY file (#445) and change the format of the MONTHLY
```
ACTIVITY multiple from five (5) digits to seven (7) digits.
```

72

INPATIENT DISPENSING UPDATE?

70;5

SET

'1' FOR YES;

LAST EDITED: MAR 17, 1993
HELP-PROMPT: Enter 1 or YES to enable updating by AR/WS.

DESCRIPTION:

This field is checked before attempting to update a Drug Accountability Location with AR/WS dispensing.

TECHNICAL DESCR:

Before ^PSGWUAS calls ^PSARWS a check is made on this field before attempting updates to a Drug Accountability Location.

80

PSS VERSION

80;1

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>999)!(X<1)!(X?.E1"."3N.N) X
LAST EDITED: MAR 26, 1996
HELP-PROMPT: Type a Number between 1 and 999, 2 Decimal Digits

80.7

DEFAULT MED ROUTE FOR CPRS

80;7

SET

'0' FOR NO;
'1' FOR YES;

LAST EDITED: JUL 09, 2009
HELP-PROMPT: Enter Y to display only the default med route in CPRS or N to continue with the current functionality.

DESCRIPTION: This field should be marked "YES" if the site prefers the MED ROUTE field (#.06) in the PHARMACY ORDERABLE ITEM file (#50.7) to appear as the default/only entry during CPRS order entry. If no default medication route is

defined in the PHARMACY ORDERABLE ITEM file (#50.7), then the routes from the DOSAGE FORM file (#50.606) will display.

This field will affect only orders entered via the Inpatient Medications dialog or the Outpatient Medications dialog in CPRS. It will not impact IV Fluids entered via CPRS or orders entered via backdoor Pharmacy.

TECHNICAL DESCR:

Set of codes. "YES" to display only the default med route in CPRS and "NO" to continue with the current functionality.

81

ORDERABLE ITEM STATUS TRACKER

80;2

SET

'1' FOR AUTO CREATE STARTED;
'2' FOR AUTO CREATE FINISHED;
'3' FOR MANUAL CREATE DONE;
'0' FOR AUTO CREATE NEVER STARTED;
'4' FOR SEND MASTER FILE UPDATE TO OERR;

LAST EDITED: MAR 26, 1996

90

PSU PBM JOB

90;1

DATE

INPUT TRANSFORM: S %DT="ET" D ^%DT S X=Y K:Y<1 X
LAST EDITED: AUG 10, 1998

DESCRIPTION:

This field is used by PBM to monitor that the monthly extract program ran to completion.

90.01

PBM AR/WS AOU MAPPINGS

90.01;0

POINTER Multiple #59.79001

59.79001

LAST EDITED: SEP 22, 2003

DESCRIPTION: The mapping between an Automatic Replenishment/Ward Stock (AR/WS) Area of Use (AOU) and either a Medical Center Division or Outpatient Site is stored in this multiple. This mapping shall be used by the Pharmacy Benefit

Management (PBM) application when extracting dispensing information from the AR/WS application to assign workload to the appropriate division or outpatient site. If an AOU is not mapped to a Medical Center Division or

Outpatient site, the dispensing data will be extracted under the facility at which the database resides.

90.02

PBM CS NAOU MAPPINGS

90.02;0

POINTER Multiple #59.79002

59.79002

LAST EDITED: SEP 22, 2003

DESCRIPTION: The mapping between a Controlled Substance (CS) Narcotic Area of Use (NAOU) and either a Medical Center division or Outpatient site is stored in this multiple. This mapping shall be used by the Pharmacy Benefit Management

(PBM) application when extracting dispensing information from the CS application to assign workload to the appropriate division or outpatient site. If a CS NAOU is not mapped to a Medical Center division or Outpatient

site, the dispensing data will be extracted under the facility at which the database resides.

90.03

PBM DA PHARM LOC MAPPINGS

90.03;0

POINTER Multiple #59.79003

59.79003

LAST EDITED: SEP 22, 2003

DESCRIPTION: The mapping between a Drug Accountability (DA) Pharmacy location and either a Medical Center division or Outpatient site is stored in this multiple. This mapping shall be used by the Pharmacy Benefit Management (PBM)

application when extracting purchasing information from the DA application to assign procurement data to the appropriate division or Outpatient site. If a DA Pharmacy location is not mapped to a Medical Center division or

Outpatient site, the procurement data will be extracted under the facility at which the database resides.

91

DOSE CONVERSION STATUS TRACKER

80;3

SET

'0' FOR CONVERSION NEVER RUN;
'1' FOR CONVERSION QUEUED;
'2' FOR CONVERSION STARTED;
'3' FOR CONVERSION COMPLETE;

LAST EDITED: MAR 28, 2000

DESCRIPTION:

This field tracks the status of the dosage conversion.

UNEDITABLE

92

DOSE CONVERSION START

80;4

DATE

INPUT TRANSFORM: S %DT="ESTR" D ^%DT S X=Y K:Y<1 X
LAST EDITED: MAR 28, 2000

DESCRIPTION:

This is the date/time when the dosage conversion started.

UNEDITABLE

93

DOSE CONVERSION STOP

80;5

DATE

INPUT TRANSFORM: S %DT="ESTR" D ^%DT S X=Y K:Y<1 X
LAST EDITED: MAR 28, 2000

DESCRIPTION:

This is the date/time when the dosage conversion ended.

UNEDITABLE

94

DOSE CONVERSION RUN BY

80;6

POINTER TO NEW PERSON FILE (#200)

NEW PERSON(#200)

LAST EDITED: MAR 28, 2000

DESCRIPTION:

This is the person who ran the dosage conversion.

UNEDITABLE

9999999.01

IHS OUT-PHARM PROV CONV DATE

9999999;1

DATE

INPUT TRANSFORM: S %DT="ET" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JUN 01, 1993

9999999.02

IHS OUT-PHARM PROV LAST RX

9999999;2

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>999999)!(X<0)!(X?.E1"."1N.N) X
LAST EDITED: JUN 01, 1993
HELP-PROMPT: Type a Number between 0 and 999999, 0 Decimal Digits

9999999.03

MED-INSTR CONV DATE

9999999;3

DATE

INPUT TRANSFORM: S %DT="ET" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JUN 03, 1993

9999999.04

MED-INSTR L-REC NO

9999999;4

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>99999)!(X<0)!(X?.E1"."1N.N) X
LAST EDITED: JUN 03, 1993
HELP-PROMPT: Type a Number between 0 and 99999, 0 Decimal Digits

9999999.05

INTERVENTION CONV DATE

9999999;5

DATE

INPUT TRANSFORM: S %DT="ET" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JUN 04, 1993

9999999.06

INTERVENTION L-REC NO

9999999;6

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>99999)!(X<0)!(X?.E1"."1N.N) X
LAST EDITED: JUN 04, 1993
HELP-PROMPT: Type a Number between 0 and 99999, 0 Decimal Digits

9999999.07

FILE 50 1ST DIV FLAG DATE

9999999;7

DATE

INPUT TRANSFORM: S %DT="ET" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JUN 08, 1993

9999999.08

FILE 50 1ST DIV FLAG L-REC

9999999;8

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>99999)!(X<0)!(X?.E1"."1N.N) X
LAST EDITED: JUN 08, 1993
HELP-PROMPT: Type a Number between 0 and 99999, 0 Decimal Digits

9999999.09

FILE 50 APU DATE

9999999;9

DATE

INPUT TRANSFORM: S %DT="ET" D ^%DT S X=Y K:Y<1 X
LAST EDITED: JUN 08, 1993

9999999.11

FILE 50 APU L-REC

9999999;10

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>99999)!(X<0)!(X?.E1"."1N.N) X
LAST EDITED: JUN 08, 1993
HELP-PROMPT: Type a Number between 0 and 99999, 0 Decimal Digits

ICR LINK	Subscribing Package(s)	Fields Referenced
ICR #694	OUTPATIENT PHARMACY CMOP	SCRIPTALK PRINT DEVICE MAPPING (47). Access: Both R/W w/Fileman SITE NAME (.01). Access: Direct Global Read & w/Fileman DEFAULT OUTPATIENT SITE (40). Access: Direct Global Read & w/Fileman DEFAULT OUTPATIENT SITE (42). Access: Direct Global Read & w/Fileman ADMISSION CANCEL OF RXS (40.1). Access: Direct Global Read & w/Fileman INTERDIVISIONAL PROCESSING (40.11). Access: Direct Global Read & w/Fileman DIVISION PROMPT ASKED (40.12). Access: Direct Global Read & w/Fileman REFILL/RENEW DIVISION (40.13). Access: Direct Global Read & w/Fileman DAYS PRINTED RX STAYS IN 52.5 (40.14). Access: Direct Global Read & w/Fileman POLYPHARMACY W/ACTION PROFILE (40.16). Access: Direct Global Read & w/Fileman EXEMPT WARD FROM AUTOCANCEL (40.19). Access: Direct Global Read & w/Fileman EXEMPT WARD FROM AUTOCANCEL (.01). Access: Direct Global Read & w/Fileman TRANSMISSION START DATE (46.1). Access: Direct Global Read & w/Fileman TRANSMISSION (46.2). Access: Direct Global Read & w/Fileman BATCH CONTROL ID (46.3). Access: Direct Global Read & w/Fileman NUMBER OF MSH COUNT (46.4). Access: Direct Global Read & w/Fileman NUMBER OF LINES COUNT (46.5). Access: Direct Global Read & w/Fileman OUTPATIENT ORDERS CONVERSION (48). Access: Direct Global Read & w/Fileman LAST PATIENT CONVERTED (48.1). Access: Direct Global Read & w/Fileman OUTPATIENT VERSION (49.99). Access: Direct Global Read & w/Fileman DATE OP 6 INSTALLED (49.98). Access: Direct Global Read & w/Fileman LAST RX CONVERTED (49.97). Access: Direct Global Read & w/Fileman DATE V7 INSTALLED (49.96). Access: Direct Global Read & w/Fileman LAST RX (41). Access: Direct Global Read & w/Fileman V7 POST BACKGROUND STOP (49.982). Access: Direct Global Read & w/Fileman V7 POST BACKGROUND START (49.981). Access: Direct Global Read & w/Fileman V7 POST BACKFILL START (49.983). Access: Direct Global Read & w/Fileman V7 POST BACKFILL (49.984). Access: Direct Global Read & w/Fileman
ICR #1427	General Medical Record - Vitals	VERSION NUMBER LAST INITS RUN (20.1). Access: Direct Global Read & w/Fileman
ICR #1930	CONTROLLED SUBSTANCES	DATE OP INSTALLED (49.98). Access: Direct Global Read & w/Fileman DATE V2 CS/DA CONVERSION (71). Access: Direct Global R/W & w/Fileman
ICR #1981	CMOP	ADMISSION CANCEL OF RXS (40.1). Access: Direct Global Read & w/Fileman INTERDIVISIONAL PROCESSING (40.11). Access: Direct Global Read & w/Fileman DIVISION PROMPT ASKED (40.12). Access: Direct Global Read & w/Fileman REFILL/RENEW DIVISION (40.13). Access: Direct Global Read & w/Fileman DAYS PRINTED RX STAYS IN 52.5 (40.14). Access: Direct Global Read & w/Fileman DATE OP INSTALLED (49.98). Access: Direct Global Read & w/Fileman
ICR #2181	INPATIENT MEDICATIONS
ICR #2613	NATIONAL DRUG FILE	NDF VERSION (10). Access: Direct Global R/W & w/Fileman RESTART NUMBER (11). Access: Direct Global R/W & w/Fileman CONVERSION REMATCH OPTION DONE (12). Access: Direct Global R/W & w/Fileman LAST DRUG CONVERTED (10.1). Access: Direct Global R/W & w/Fileman V4 CONVERSION COMPLETED (10.2). Access: Direct Global R/W & w/Fileman PIMS PRINTER (13). Access: Direct Global R/W & w/Fileman PIMS LANGUAGE (14). Access: Direct Global R/W & w/Fileman OUTPATIENT VERSION (49.99). Access: Direct Global R/W & w/Fileman SITE NAME (.01). Access: Direct Global R/W & w/Fileman PMIS SECTION DELETE (15). Access: Direct Global R/W & w/Fileman FDA MED GUIDE SERVER URL (100). Access: Direct Global Read & w/Fileman
ICR #2682	ORDER ENTRY/RESULTS REPORTING	ORDERABLE ITEM STATUS TRACKER (81). Access: Direct Global Read & w/Fileman
ICR #2854	PHARMACY BENEFITS MANAGEMENT	PSU PBM JOB (90). Access: Both R/W w/Fileman PBM AR/WS AOU MAPPING (90.01). Access: AR/WS AOU (.01). Access: Both R/W w/Fileman DIVISION (.02). Access: Both R/W w/Fileman OUTPATIENT SITE (.03). Access: Both R/W w/Fileman PBM CS NAOU MAPPING (90.02). Access: CS NAOU (.01). Access: Both R/W w/Fileman DIVISION (.02). Access: Both R/W w/Fileman OUTPATIENT SITE (.03). Access: Both R/W w/Fileman PBM DA PHARM LOC MAPPING (90.03). Access: DA PHARMACY LOCATION (.01). Access: Both R/W w/Fileman DIVISION (.02). Access: Both R/W w/Fileman OUTPATIENT SITE (.03). Access: Both R/W w/Fileman
ICR #3034	DRUG ACCOUNTABILITY	LAST DRUG LINKED (70). Access: Direct Global R/W & w/Fileman LAST DRUG LINKER (70.1). Access: Direct Global R/W & w/Fileman LAST DRUG LINK DATE (70.2). Access: Direct Global R/W & w/Fileman
ICR #3136	HEALTH SUMMARY	ADMISSION CANCEL OF RXS (40.1). Access: Read w/Fileman

>>	Not killed explicitly
*	Changed
!	Killed
~	Newed

Name	Field # of Occurrence
>> %DT	20.11+1, 20.12+1, 20.13+1, 20.15+1, 20.16+1, 20.2+1, 20.401+1, 20.403+1, 20.405+1, 20.408+1 , 20.41+1, 20.411+1, 20.5+1, 25.1+1, 25.2+1, 25.3+1, 25.4+1, 30.1+1, 46.1+1, 46.2+1 , 49.95+1, 49.96+1, 49.98+1, 49.981+1, 49.982+1, 50+1, 59.02+1, 59.1+1, 59.2+1, 59.3+1 , 59.4+1, 63.52+1, 63.54+1, 65+1, 70.2+1, 71+1, 90+1, 92+1, 93+1, 9999999.01+1 , 9999999.03+1, 9999999.05+1, 9999999.07+1, 9999999.09+1, 20.11+1, 20.12+1, 20.13+1, 20.15+1, 20.16+1, 20.2+1 , 20.401+1, 20.403+1, 20.405+1, 20.408+1, 20.41+1, 20.411+1, 20.5+1, 25.1+1, 25.2+1, 25.3+1 , 25.4+1, 30.1+1, 46.1+1, 46.2+1, 49.95+1, 49.96+1, 49.98+1, 49.981+1, 49.982+1, 50+1 , 59.02+1, 59.1+1, 59.2+1, 59.3+1, 59.4+1, 63.52+1, 63.54+1, 65+1, 70.2+1, 71+1 , 90+1, 92+1, 93+1, 9999999.01+1, 9999999.03+1, 9999999.05+1, 9999999.07+1, 9999999.09+1, 20.11+1, 20.12+1 , 20.13+1, 20.15+1, 20.16+1, 20.2+1, 20.401+1, 20.403+1, 20.405+1, 20.408+1, 20.41+1, 20.411+1 , 20.5+1, 25.1+1, 25.2+1, 25.3+1, 25.4+1, 30.1+1, 46.1+1, 46.2+1, 49.95+1, 49.96+1 , 49.98+1, 49.981+1, 49.982+1, 50+1, 59.02+1, 59.1+1, 59.2+1, 59.3+1, 59.4+1, 63.52+1 , 63.54+1, 65+1, 70.2+1, 71+1, 90+1, 92+1, 93+1, 9999999.01+1, 9999999.03+1, 9999999.05+1 , 9999999.07+1, 9999999.09+1, 20.11+1, 20.12+1, 20.13+1, 20.15+1, 20.16+1, 20.2+1, 20.401+1, 20.403+1 , 20.405+1, 20.408+1, 20.41+1, 20.411+1, 20.5+1, 25.1+1, 25.2+1, 25.3+1, 25.4+1, 30.1+1 , 46.1+1, 46.2+1, 49.95+1, 49.96+1, 49.98+1, 49.981+1, 49.982+1, 50+1, 59.02+1, 59.1+1 , 59.2+1, 59.3+1, 59.4+1, 63.52+1, 63.54+1, 65+1, 70.2+1, 71+1, 90+1, 92+1 , 93+1, 9999999.01+1, 9999999.03+1, 9999999.05+1, 9999999.07+1, 9999999.09+1
>> DA	.01(XREF 1S), .01(XREF 1K), .01(XREF 1S), .01(XREF 1K), .01(XREF 1S), .01(XREF 1K), .01(XREF 1S), .01(XREF 1K)
>> DINUM	.01+1, .01+1, .01+1, .01+1
X	.01+1!, .01(XREF 1S), .01(XREF 1K), 10+1!, 11+1!, 15+1!, 20.1+1!, 20.11+1!, 20.12+1!, 20.13+1! , 20.15+1!, 20.16+1!, 20.2+1!, 20.401+1!, 20.403+1!, 20.405+1!, 20.406+1!, 20.407+1!, 20.408+1!, 20.409+1! , 20.41+1!, 20.411+1!, 20.5+1!, 25+1!, 25.1+1!, 25.2+1!, 25.3+1!, 25.4+1!, 26.6+1!, 30.1+1! , 31+1!, 32+1!, 34+1!, 40.14+1!, 40.21+1!, 40.21(XREF 1S), 40.21(XREF 1K), 40.22+1!, 40.22(XREF 1S), 40.22(XREF 1K) , 40.23+1!, 40.23(XREF 1S), 40.23(XREF 1K), 40.24+1!, 40.24(XREF 1S), 40.24(XREF 1K), 40.25+1!, 40.25(XREF 1S), 40.25(XREF 1K), 40.26+1! , 40.26(XREF 1S), 40.26(XREF 1K), 40.27+1!, 40.27(XREF 1S), 40.27(XREF 1K), 40.28+1!, 40.28(XREF 1S), 40.28(XREF 1K), 40.29+1!, 40.29(XREF 1S) , 40.29(XREF 1K), 40.3+1!, 40.3(XREF 1S), 40.3(XREF 1K), 40.31+1!, 40.31(XREF 1S), 40.31(XREF 1K), 40.32+1!, 40.32(XREF 1S), 40.32(XREF 1K) , 40.33+1!, 40.33(XREF 1S), 40.33(XREF 1K), 40.34+1!, 40.34(XREF 1S), 40.34(XREF 1K), 40.35+1!, 40.35(XREF 1S), 40.35(XREF 1K), 40.36+1! , 40.36(XREF 1S), 40.36(XREF 1K), 40.37+1!, 40.37(XREF 1S), 40.37(XREF 1K), 40.38+1!, 40.38(XREF 1S), 40.38(XREF 1K), 40.39+1!, 40.39(XREF 1S) , 40.39(XREF 1K), 40.4+1!, 40.4(XREF 1S), 40.4(XREF 1K), 40.41+1!, 40.41(XREF 1S), 40.41(XREF 1K), 40.42+1!, 40.42(XREF 1S), 40.42(XREF 1K) , 40.43+1!, 40.43(XREF 1S), 40.43(XREF 1K), 40.44+1!, 40.44(XREF 1S), 40.44(XREF 1K), 40.45+1!, 40.45(XREF 1S), 40.45(XREF 1K), 41+1! , 42+1!, 46.1+1!, 46.2+1!, 46.3+1!, 46.4+1!, 46.5+1!, 49.95+1!, 49.96+1!, 49.97+1!, 49.98+1! , 49.981+1!, 49.982+1!, 49.99+1!, 50+1!, 59.01+1!, 59.02+1!, 59.1+1!, 59.2+1!, 59.3+1!, 59.4+1! , 60.02+1!, 60.1+1!, 61.2+1!, 63.51+1!, 63.52+1!, 63.54+1!, 65+1!, 66+1!, 70.2+1!, 71+1! , 80+1!, 90+1!, 92+1!, 93+1!, 9999999.01+1!, 9999999.02+1!, 9999999.03+1!, 9999999.04+1!, 9999999.05+1!, 9999999.06+1! , 9999999.07+1!, 9999999.08+1!, 9999999.09+1!, 9999999.11+1!, .01+1!, .01(XREF 1S), .01(XREF 1K), 10+1!, 11+1!, 15+1! , 20.1+1!, 20.11+1!, 20.12+1!, 20.13+1!, 20.15+1!, 20.16+1!, 20.2+1!, 20.401+1!, 20.403+1!, 20.405+1! , 20.406+1!, 20.407+1!, 20.408+1!, 20.409+1!, 20.41+1!, 20.411+1!, 20.5+1!, 25+1!, 25.1+1!, 25.2+1! , 25.3+1!, 25.4+1!, 26.6+1!, 30.1+1!, 31+1!, 32+1!, 34+1!, 40.14+1!, 40.21+1!, 40.21(XREF 1S) , 40.21(XREF 1K), 40.22+1!, 40.22(XREF 1S), 40.22(XREF 1K), 40.23+1!, 40.23(XREF 1S), 40.23(XREF 1K), 40.24+1!, 40.24(XREF 1S), 40.24(XREF 1K) , 40.25+1!, 40.25(XREF 1S), 40.25(XREF 1K), 40.26+1!, 40.26(XREF 1S), 40.26(XREF 1K), 40.27+1!, 40.27(XREF 1S), 40.27(XREF 1K), 40.28+1! , 40.28(XREF 1S), 40.28(XREF 1K), 40.29+1!, 40.29(XREF 1S), 40.29(XREF 1K), 40.3+1!, 40.3(XREF 1S), 40.3(XREF 1K), 40.31+1!, 40.31(XREF 1S) , 40.31(XREF 1K), 40.32+1!, 40.32(XREF 1S), 40.32(XREF 1K), 40.33+1!, 40.33(XREF 1S), 40.33(XREF 1K), 40.34+1!, 40.34(XREF 1S), 40.34(XREF 1K) , 40.35+1!, 40.35(XREF 1S), 40.35(XREF 1K), 40.36+1!, 40.36(XREF 1S), 40.36(XREF 1K), 40.37+1!, 40.37(XREF 1S), 40.37(XREF 1K), 40.38+1! , 40.38(XREF 1S), 40.38(XREF 1K), 40.39+1!, 40.39(XREF 1S), 40.39(XREF 1K), 40.4+1!, 40.4(XREF 1S), 40.4(XREF 1K), 40.41+1!, 40.41(XREF 1S) , 40.41(XREF 1K), 40.42+1!, 40.42(XREF 1S), 40.42(XREF 1K), 40.43+1!, 40.43(XREF 1S), 40.43(XREF 1K), 40.44+1!, 40.44(XREF 1S), 40.44(XREF 1K) , 40.45+1!, 40.45(XREF 1S), 40.45(XREF 1K), 41+1!, 42+1!, 46.1+1!, 46.2+1!, 46.3+1!, 46.4+1!, 46.5+1! , 49.95+1!, 49.96+1!, 49.97+1!, 49.98+1!, 49.981+1!, 49.982+1!, 49.99+1!, 50+1!, 59.01+1!, 59.02+1! , 59.1+1!, 59.2+1!, 59.3+1!, 59.4+1!, 60.02+1!, 60.1+1!, 61.2+1!, 63.51+1!, 63.52+1!, 63.54+1! , 65+1!, 66+1!, 70.2+1!, 71+1!, 80+1!, 90+1!, 92+1!, 93+1!, 9999999.01+1!, 9999999.02+1! , 9999999.03+1!, 9999999.04+1!, 9999999.05+1!, 9999999.06+1!, 9999999.07+1!, 9999999.08+1!, 9999999.09+1!, 9999999.11+1!, .01+1!, .01(XREF 1S) , .01(XREF 1K), 10+1!, 11+1!, 15+1!, 20.1+1!, 20.11+1!, 20.12+1!, 20.13+1!, 20.15+1!, 20.16+1! , 20.2+1!, 20.401+1!, 20.403+1!, 20.405+1!, 20.406+1!, 20.407+1!, 20.408+1!, 20.409+1!, 20.41+1!, 20.411+1! , 20.5+1!, 25+1!, 25.1+1!, 25.2+1!, 25.3+1!, 25.4+1!, 26.6+1!, 30.1+1!, 31+1!, 32+1! , 34+1!, 40.14+1!, 40.21+1!, 40.21(XREF 1S), 40.21(XREF 1K), 40.22+1!, 40.22(XREF 1S), 40.22(XREF 1K), 40.23+1!, 40.23(XREF 1S) , 40.23(XREF 1K), 40.24+1!, 40.24(XREF 1S), 40.24(XREF 1K), 40.25+1!, 40.25(XREF 1S), 40.25(XREF 1K), 40.26+1!, 40.26(XREF 1S), 40.26(XREF 1K) , 40.27+1!, 40.27(XREF 1S), 40.27(XREF 1K), 40.28+1!, 40.28(XREF 1S), 40.28(XREF 1K), 40.29+1!, 40.29(XREF 1S), 40.29(XREF 1K), 40.3+1! , 40.3(XREF 1S), 40.3(XREF 1K), 40.31+1!, 40.31(XREF 1S), 40.31(XREF 1K), 40.32+1!, 40.32(XREF 1S), 40.32(XREF 1K), 40.33+1!, 40.33(XREF 1S) , 40.33(XREF 1K), 40.34+1!, 40.34(XREF 1S), 40.34(XREF 1K), 40.35+1!, 40.35(XREF 1S), 40.35(XREF 1K), 40.36+1!, 40.36(XREF 1S), 40.36(XREF 1K) , 40.37+1!, 40.37(XREF 1S), 40.37(XREF 1K), 40.38+1!, 40.38(XREF 1S), 40.38(XREF 1K), 40.39+1!, 40.39(XREF 1S), 40.39(XREF 1K), 40.4+1! , 40.4(XREF 1S), 40.4(XREF 1K), 40.41+1!, 40.41(XREF 1S), 40.41(XREF 1K), 40.42+1!, 40.42(XREF 1S), 40.42(XREF 1K), 40.43+1!, 40.43(XREF 1S) , 40.43(XREF 1K), 40.44+1!, 40.44(XREF 1S), 40.44(XREF 1K), 40.45+1!, 40.45(XREF 1S), 40.45(XREF 1K), 41+1!, 42+1!, 46.1+1! , 46.2+1!, 46.3+1!, 46.4+1!, 46.5+1!, 49.95+1!, 49.96+1!, 49.97+1!, 49.98+1!, 49.981+1!, 49.982+1! , 49.99+1!, 50+1!, 59.01+1!, 59.02+1!, 59.1+1!, 59.2+1!, 59.3+1!, 59.4+1!, 60.02+1!, 60.1+1! , 61.2+1!, 63.51+1!, 63.52+1!, 63.54+1!, 65+1!, 66+1!, 70.2+1!, 71+1!, 80+1!, 90+1! , 92+1!, 93+1!, 9999999.01+1!, 9999999.02+1!, 9999999.03+1!, 9999999.04+1!, 9999999.05+1!, 9999999.06+1!, 9999999.07+1!, 9999999.08+1! , 9999999.09+1!, 9999999.11+1!, .01+1!, .01(XREF 1S), .01(XREF 1K), 10+1!, 11+1!, 15+1!, 20.1+1!, 20.11+1! , 20.12+1!, 20.13+1!, 20.15+1!, 20.16+1!, 20.2+1!, 20.401+1!, 20.403+1!, 20.405+1!, 20.406+1!, 20.407+1! , 20.408+1!, 20.409+1!, 20.41+1!, 20.411+1!, 20.5+1!, 25+1!, 25.1+1!, 25.2+1!, 25.3+1!, 25.4+1! , 26.6+1!, 30.1+1!, 31+1!, 32+1!, 34+1!, 40.14+1!, 40.21+1!, 40.21(XREF 1S), 40.21(XREF 1K), 40.22+1! , 40.22(XREF 1S), 40.22(XREF 1K), 40.23+1!, 40.23(XREF 1S), 40.23(XREF 1K), 40.24+1!, 40.24(XREF 1S), 40.24(XREF 1K), 40.25+1!, 40.25(XREF 1S) , 40.25(XREF 1K), 40.26+1!, 40.26(XREF 1S), 40.26(XREF 1K), 40.27+1!, 40.27(XREF 1S), 40.27(XREF 1K), 40.28+1!, 40.28(XREF 1S), 40.28(XREF 1K) , 40.29+1!, 40.29(XREF 1S), 40.29(XREF 1K), 40.3+1!, 40.3(XREF 1S), 40.3(XREF 1K), 40.31+1!, 40.31(XREF 1S), 40.31(XREF 1K), 40.32+1! , 40.32(XREF 1S), 40.32(XREF 1K), 40.33+1!, 40.33(XREF 1S), 40.33(XREF 1K), 40.34+1!, 40.34(XREF 1S), 40.34(XREF 1K), 40.35+1!, 40.35(XREF 1S) , 40.35(XREF 1K), 40.36+1!, 40.36(XREF 1S), 40.36(XREF 1K), 40.37+1!, 40.37(XREF 1S), 40.37(XREF 1K), 40.38+1!, 40.38(XREF 1S), 40.38(XREF 1K) , 40.39+1!, 40.39(XREF 1S), 40.39(XREF 1K), 40.4+1!, 40.4(XREF 1S), 40.4(XREF 1K), 40.41+1!, 40.41(XREF 1S), 40.41(XREF 1K), 40.42+1! , 40.42(XREF 1S), 40.42(XREF 1K), 40.43+1!, 40.43(XREF 1S), 40.43(XREF 1K), 40.44+1!, 40.44(XREF 1S), 40.44(XREF 1K), 40.45+1!, 40.45(XREF 1S) , 40.45(XREF 1K), 41+1!, 42+1!, 46.1+1!, 46.2+1!, 46.3+1!, 46.4+1!, 46.5+1!, 49.95+1!, 49.96+1! , 49.97+1!, 49.98+1!, 49.981+1!, 49.982+1!, 49.99+1!, 50+1!, 59.01+1!, 59.02+1!, 59.1+1!, 59.2+1! , 59.3+1!, 59.4+1!, 60.02+1!, 60.1+1!, 61.2+1!, 63.51+1!, 63.52+1!, 63.54+1!, 65+1!, 66+1! , 70.2+1!, 71+1!, 80+1!, 90+1!, 92+1!, 93+1!, 9999999.01+1!, 9999999.02+1!, 9999999.03+1!, 9999999.04+1! , 9999999.05+1!, 9999999.06+1!, 9999999.07+1!, 9999999.08+1!, 9999999.09+1!, 9999999.11+1!
>> Y	20.11+1, 20.12+1, 20.13+1, 20.15+1, 20.16+1, 20.2+1, 20.401+1, 20.403+1, 20.405+1, 20.408+1 , 20.41+1, 20.411+1, 20.5+1, 25.1+1, 25.2+1, 25.3+1, 25.4+1, 30.1+1, 46.1+1, 46.2+1 , 49.95+1, 49.96+1, 49.98+1, 49.981+1, 49.982+1, 50+1, 59.02+1, 59.1+1, 59.2+1, 59.3+1 , 59.4+1, 63.52+1, 63.54+1, 65+1, 70.2+1, 71+1, 90+1, 92+1, 93+1, 9999999.01+1 , 9999999.03+1, 9999999.05+1, 9999999.07+1, 9999999.09+1, 20.11+1, 20.12+1, 20.13+1, 20.15+1, 20.16+1, 20.2+1 , 20.401+1, 20.403+1, 20.405+1, 20.408+1, 20.41+1, 20.411+1, 20.5+1, 25.1+1, 25.2+1, 25.3+1 , 25.4+1, 30.1+1, 46.1+1, 46.2+1, 49.95+1, 49.96+1, 49.98+1, 49.981+1, 49.982+1, 50+1 , 59.02+1, 59.1+1, 59.2+1, 59.3+1, 59.4+1, 63.52+1, 63.54+1, 65+1, 70.2+1, 71+1 , 90+1, 92+1, 93+1, 9999999.01+1, 9999999.03+1, 9999999.05+1, 9999999.07+1, 9999999.09+1, 20.11+1, 20.12+1 , 20.13+1, 20.15+1, 20.16+1, 20.2+1, 20.401+1, 20.403+1, 20.405+1, 20.408+1, 20.41+1, 20.411+1 , 20.5+1, 25.1+1, 25.2+1, 25.3+1, 25.4+1, 30.1+1, 46.1+1, 46.2+1, 49.95+1, 49.96+1 , 49.98+1, 49.981+1, 49.982+1, 50+1, 59.02+1, 59.1+1, 59.2+1, 59.3+1, 59.4+1, 63.52+1 , 63.54+1, 65+1, 70.2+1, 71+1, 90+1, 92+1, 93+1, 9999999.01+1, 9999999.03+1, 9999999.05+1 , 9999999.07+1, 9999999.09+1, 20.11+1, 20.12+1, 20.13+1, 20.15+1, 20.16+1, 20.2+1, 20.401+1, 20.403+1 , 20.405+1, 20.408+1, 20.41+1, 20.411+1, 20.5+1, 25.1+1, 25.2+1, 25.3+1, 25.4+1, 30.1+1 , 46.1+1, 46.2+1, 49.95+1, 49.96+1, 49.98+1, 49.981+1, 49.982+1, 50+1, 59.02+1, 59.1+1 , 59.2+1, 59.3+1, 59.4+1, 63.52+1, 63.54+1, 65+1, 70.2+1, 71+1, 90+1, 92+1 , 93+1, 9999999.01+1, 9999999.03+1, 9999999.05+1, 9999999.07+1, 9999999.09+1

Customize PDF page

Package: Pharmacy Data Management

Global: ^PS(59.7

Information

Description

Directly Accessed By Routines, Total: 229

Accessed By FileMan Db Calls, Total: 18

Pointed To By FileMan Files, Total: 1

Pointer To FileMan Files, Total: 12

Fields, Total: 154

Found Entries, Total: 1

ICR, Total: 10

External References

Global Variables Directly Accessed

Local Variables

Legend:

Name	Field # of Occurrence
^%DT	20.11+1, 20.12+1, 20.13+1, 20.15+1, 20.16+1, 20.2+1, 20.401+1, 20.403+1, 20.405+1, 20.408+1 , 20.41+1, 20.411+1, 20.5+1, 25.1+1, 25.2+1, 25.3+1, 25.4+1, 30.1+1, 46.1+1, 46.2+1 , 49.95+1, 49.96+1, 49.98+1, 49.981+1, 49.982+1, 50+1, 59.02+1, 59.1+1, 59.2+1, 59.3+1 , 59.4+1, 63.52+1, 63.54+1, 65+1, 70.2+1, 71+1, 90+1, 92+1, 93+1, 9999999.01+1 , 9999999.03+1, 9999999.05+1, 9999999.07+1, 9999999.09+1, 20.11+1, 20.12+1, 20.13+1, 20.15+1, 20.16+1, 20.2+1 , 20.401+1, 20.403+1, 20.405+1, 20.408+1, 20.41+1, 20.411+1, 20.5+1, 25.1+1, 25.2+1, 25.3+1 , 25.4+1, 30.1+1, 46.1+1, 46.2+1, 49.95+1, 49.96+1, 49.98+1, 49.981+1, 49.982+1, 50+1 , 59.02+1, 59.1+1, 59.2+1, 59.3+1, 59.4+1, 63.52+1, 63.54+1, 65+1, 70.2+1, 71+1 , 90+1, 92+1, 93+1, 9999999.01+1, 9999999.03+1, 9999999.05+1, 9999999.07+1, 9999999.09+1, 20.11+1, 20.12+1 , 20.13+1, 20.15+1, 20.16+1, 20.2+1, 20.401+1, 20.403+1, 20.405+1, 20.408+1, 20.41+1, 20.411+1 , 20.5+1, 25.1+1, 25.2+1, 25.3+1, 25.4+1, 30.1+1, 46.1+1, 46.2+1, 49.95+1, 49.96+1 , 49.98+1, 49.981+1, 49.982+1, 50+1, 59.02+1, 59.1+1, 59.2+1, 59.3+1, 59.4+1, 63.52+1 , 63.54+1, 65+1, 70.2+1, 71+1, 90+1, 92+1, 93+1, 9999999.01+1, 9999999.03+1, 9999999.05+1 , 9999999.07+1, 9999999.09+1, 20.11+1, 20.12+1, 20.13+1, 20.15+1, 20.16+1, 20.2+1, 20.401+1, 20.403+1 , 20.405+1, 20.408+1, 20.41+1, 20.411+1, 20.5+1, 25.1+1, 25.2+1, 25.3+1, 25.4+1, 30.1+1 , 46.1+1, 46.2+1, 49.95+1, 49.96+1, 49.98+1, 49.981+1, 49.982+1, 50+1, 59.02+1, 59.1+1 , 59.2+1, 59.3+1, 59.4+1, 63.52+1, 63.54+1, 65+1, 70.2+1, 71+1, 90+1, 92+1 , 93+1, 9999999.01+1, 9999999.03+1, 9999999.05+1, 9999999.07+1, 9999999.09+1
ENDLP^PSSDDUT	60.1+1, 60.1+1, 60.1+1, 60.1+1
LBLS^PSSDDUT2	61.2(HELP ), 61.2(HELP ), 61.2(HELP ), 61.2(HELP )